Is there any reason I need both premiere pro cs6 and premiere pro cc on my computer?

any suggestions would be great. Thanks!

I'd also recommend keeping Premiere CS 6 around until all the "legacy" projects you're working on are well and trully finished. Unless you like that feeling of uncontrolled panic, I would recommend *NOT* porting a bunch of "in progress" work over to Premiere CC!
I've got one, rather complicated project, that I'm working on and I think CC will make it easier but, rather than risk all the work I've already done in CS6, I've copied the whole thing over to an external drive and renamed the project so I can always, easily, go back if CC gives me trouble

Similar Messages

Is there any reason to Archive both a DNG and DNG with raw embedded?

In Real World Camera Raw, which suggests using DNG, they seem to be advocating making an archive of both the Camera Raw edited and Bridge rated conversions to DNG files, and another set of the raw files converted to DNG with raws embedded. If you take the raw files from Camera Raw and make one save to DNG with raws embedded, it seems that you could use this set both for a working copy and also archive it. Any reason to make a second DNG set just to have a set without Camera Raw edits and ratings?

That is a good question and one no one can answer not even Adobe. If
management or whatever should change at Adobe in the future they could
decide to remove support for old cameras. Cameras like those that are 5 or
10 years old (we are talking in the future here). I would imagine that...
A) Adobe would warn user's ahead of time.
B) You could keep an older copy of DNG Converter that does support those.
With that the only time limiting factor is the operating system a time may
come where the program simply won't run.
So nothing is guaranteed. However, I think for the foreseeable future
support for even the oldest of cameras that are currently supported is
pretty safe. Nothing is forever however.

Premiere Pro CS6 and MacBook Pro Retina : Painfully slow exports, very long renders

Hello All,
This question seems to have been posted before..
I came from Windows land and have used Premiere since '97..
"Let's try a super spec Macbook and have a mobile editing suite.. Great!"
I generally work with DSLR footage, H264 codec and .wav files.
Imports and scrubbing is great, applying effects starts it slowing down and I'll adjust playback to 1/2 or 1/4 resolution.
And that's just on one layer of video..
Now, when it comes to exporting in general, a 50 second clip takes over 30 minutes to render.
Very frustrating..
I mainly export using the existing presets for YoutubeHD and VimeoHD.
Can't get my head around why it takes so long and I am hoping that perhaps a re-install or a fundamental preference setting will solve it.
In my preferences, I've allocated 11GB of memory to Adobe Production Suite applications and I rarely run 2 at a time.
Scratch disks are set to project folders, on a 4GB RAID1 drive connected via Thunderbolt protocol
Tech specs :
Processor - 2.6 GHz Intel Core i7
Memory - 16GB 1600Mhz DDR3
Graphics - NVIDIA GeForce GT 650M 1024 MB
Storage - SSD 500GB
OS - OS X, v10.8.3
I look forward to hearing back from you and thank you in advance

Well, I've run a few tests, and learned something new.
CS6 on my MacBook Pro has three acceleration modes now: Software, Hardware (OpenCL) and Hardware (CUDA).
I've run software only... not so great. Then I ran Hardware Open CL, and it "acts" like CUDA did on my Mac Pro with GTX 285... bars that were red turned yellow, and some things ran without rendering! I was pretty surprised by this, as I have only 512MB VRAM, not 1GB VRAM on the 650M.
This is only my not-very-serious edit-on-the-road system, so I didn't spec it out to be a monster editing laptop, but I'm extremely pleased by how well it runs with CS6. I have two very nice, new SSDs inside; one for OS X/apps, and the other for media, as well as 16GB RAM. Each SSD runs at 500MB/sec +/- whether read or write, despite the second SSD being in the space where the optical drive was.
It's too bad there's not just a *wee bit* more space where the optical drive was... or I'd try to stuff THREE SSDs inside, and RAID two of them for media.
So far, I'm really pleased with how well it works with only 512MB VRAM, which was the question I had wanted answered.

Are there any specific codecs or import libraries that will make Premiere 6 use more file types?

Are there any specific codecs or import libraries that will allow Premiere 6 to import more file types? I'm using Premiere 6 on Windows 7.
It seems that the only kind of file that can be imported in to this version of Premiere are certain types of AVI files... even some types of AVIs will import but then will not appear when placed in the timeline... no MPGs, MP4s, WMVs, or anything else will import at all.
Virtually every file that I need to bring in to Premiere 6 has to be converted to AVI with the H.264 codec first.
Any help would be helpful.
digi

Hi Bill and John,
Thanks for your replies.
My inquiry isn't as much to do with the AVIs that won't import as it is to do with figuring out the way that I can make MPGs, MP4s, MOVs and WMVs import in to Premiere 6.
The AVIs that do import were converted or created using the H.264 codec. I do know a little about codecs, but I don't hold the PhD in codecs that is apparently required to completely understand them.
Below is the chart from the Premiere Elements 4 page at this link... http://kb2.adobe.com/cps/402/kb402540.html
So, if I understand correctly, Bill is saying the Premeire Elements 4 is actually newer than Premiere 6 and that the Pr Elements apps will actually import more movie file formats than the regular versions of Premiere and Premiere Pro?... for someone trying to learn about these apps, one must admit that this seems to be reverse logic... this would be saying that Adobe gave the cheaper "consumer" versions of Premiere the ability to work with 3 or 4 more movie file formats than the more expensive "pro-sumer" version of Premiere.
Premiere 4 Elements File Format Support Chart
Microsoft AVI (.avi)
Import and Export
MOD (JVC Everio camera) (.mod)
Import only
MPEG-1 (.mpg, .mpeg, .m1v, .mpv)
Import and Export
MPEG-2 (.mpg, .mpeg, .mpe, .m2t, .m2v, .mod, .mpd, .m2p)
Import only
MPEG-4 (.mp4, .m4v)
Export only
Export via QuickTime file or "Share to Mobile" workflow.
QuickTime Movie (.mov, .moov)
Import and Export
Windows Media video (.wmv)
Import and Export
The built-in web browser instruction manual in Premiere 6 shows this statement on the "Importing Clips" page, as shown in my screenshot linked above...
"File format support is provided by plug-in software modules. Over time, additional or updated file formats may be available from Adobe or other manufacturers, such as QuickTime."
This indicates that additional file format support can be added to Premiere 6 by "plug-in software modules", and that "over time, additional or updated file formats" were predicted to become available that would be supported by the file format manufacturers, such as Adobe themselves and other manufacturers such as QuickTime.
Since that was written ten years ago or more, there has certainly been the chance for these additional "plug-in software modules" to be developed "over time"... so I'm asking, "Where are they available?"
What I'm saying is, I will do my homework to earn at least my Bachelor's degree in codecs, but more than an education in codecs, I need to find these mysterious, "plug-in software modules" for Premiere 6 that Adobe wrote about and referred to over ten years ago.
Thanks for any clues as to where to locate these "plug-in software modules".
digi

Is there any reason I shouldn't work this way?

Given the lack of batch capture in FCE is there any reason why I shouldn't work in the following way:
1. Import video in large chunks using capture now
2. Use DV start stop and Make sub-clip
3. Export just the sub-clips I want as self-contained movies
4. Close the project and delete the original capture files and the FCE project file
5. Start a new project and import the movies I saved in step 3.
My reasons for wanting to do this are mainly to save disc space but also to reduce clutter in the bins. So far as I can see this works fine. The only downsides I can see are:
1. The extra time it takes but this is offset against the chore of capturing individual clips instead of using capture now.
2. The fact that reimported clips have their audio tracks set to mono mix but it seems easy enough to correct this. (As an aside, if I import a .mov file saved from Quicktime it imports into FCE with the audio set to stereo - why the difference?).
I'd be happy enough working this way, I think, provided I could be confident that I'm not going to lose quality by saving and then re-importing. Will I? Are there any other downsides I've not thought of?

You shouldn't lose any quality in the audio or video, but you may lose the timecode track. I'm not sure if you'll lose it, but if you do, you won't be able to recapture the project clips from the original tape because the timecode would be required. This isn't an issue, if you don't ever need to recapture. The timecode may even be retained... I'd have to do an export to see. As a matter of workflow, you may want to think seriously about keeping the timecode, because you can back-up your project file and have some assurance that you can recover from a chatastrophic failure simply by restoring the project file and recapturing from the original tape.
Regarding your audio and video; unless you were to add effects to the video, there should be no loss in exporting and importing. Losses in DV are incurred when you add filters (alter the image) and recompress. The audio is uncompressed PCM, so no losses to be had there, unless you change the sampling rate.

Using Airplay with AppleTV to share my MacBook Pro desktop is very unstable since upgrading to Yosemite, are there any settings I need to reconfigure?

I used to use desktop sharing from my Macbook Pro (Late 2011, Intel Core i5) to watch videos on my TV. Since upgrading to Yosemite the stream has been unwatchable. Both visual and audio latency problems are very common. As streaming from my iOS devices is fine, I'm pretty sure it's not my WiFi setup. Has anyone had similar problems? Are there any settings I need to change to improve Airplay from Yosemite?
Thanks in advance.

Hey MasterAir,
If you are having an issue with AirPlay performance, I would suggest that you troubleshoot using the steps in this article -
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in. Pls advise. Tq

Reset the device, restart the device, try downloading any other app.
All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

Is there any reason photos in an album page display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?

Is there any reason photos in an album page created in iweb display small on the iPad, but normally on an iMac? And videos on a movies page don't play on the iPad, but are OK on the iMac?

there are three displays in photos page:
1) thumbnails grid - smallest
2) deatial view and detail view slideshow - large
3a) pop-up slideshow - vary - this is slideshow.html
3b) or iphone/ipad slideshow phoneshow.html - iphone/ipad can't do pop-up
it's difficult to know which you refer to.
if you refer to pop-up slideshow then you should not look into iwebmediagrid.js as wyodor suggested.
instead look in phoneshow.html and change width and heigth of element id slideshow:
#slideshow {
position: relative;
width: 320px; /* this is default width */
height: 360px; /* this is default height */
margin-left: auto;
margin-right: auto;
overflow: hidden;

HT5622 Is there any reason why my apple id and password allow log in to App Store but say invalid password when trying to activate Facetime ?

Is there any reason why my apple id and password allow log in to App Store but say password invalid when trying to activate Facetime - I thought that Id and password were the same for all functions ?

try the steps in this article:
http://support.apple.com/kb/TS4268

Is there any reason or my why cursor is stuck on the spinning rainbow wheel?

Lately my macbook has been freezing, and I'm thinking that it's being overloaded. Most of the time the cursor is stuck on the spinning rainbow wheel, but it will eventually return back into the arrow. It's currently stuck as the spinning wheel, but I am able to click and access sites. Is there anything I should do to get this checked?
EDIT: When I open a new tab, the cursor goes back to normal. Is there any reason why it is doing that in the other tab?

Hi,
Use the PC KB and hold Windows key + r key at bootup.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Is there any reason to use FCP text vs. Borris 3D?

Is there any reason to use FCP text vs. Borris 3D?
Thanks.

boris is vector based, and the basic fcp text is bitmapped. What that means is that you can resize and reposition your type in the control tab with boris without any loss in quality. You cannot do this with fcp text. Also, I think the dropshadow, kerning and leading options are more extensive with boris. Not positive about this as I abandoned the basic fcp titler a long time ago.

How to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please

how to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please

raynee88 wrote:
how to use the apple store?
What is an Apple ID?
How do I get an Apple ID?
From here > http://support.apple.com/kb/HT5622

Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive. The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive. The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
Can you please:
1. Explain why this problem occurred. This is so annoying.
2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
3. How can I prevent similar problem with he subsequent version?
Why Apple don't make this update standard as other update?
Support please. Thank for response in advance

I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 1.5TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.

I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 3TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

You could try changing the settings in System Preferences/Security & Privacy/General/Advanced/Require an Administator password to access locked preferences
But this will affect all Preference settings.

Is there any reason I need both premiere pro cs6 and premiere pro cc on my computer?

Similar Messages

Maybe you are looking for