Is there any repair full load option in DTP?

Hi Experts,
I have run delta DTP from Cube A to Cube B with selection less than or equal to 31.03.2004 and I want to run grater than 31.03.2004. Now the problem is this load is not bringing the required records because data mart symbol is already set in Cube A.
How do I extract grater than 01.04.2009?
Is there any repair full load option in DTP?

Hi,
I am afraid that we have only full and delta options available in DTP, but the several other options available on extraction tab will enable us to do something similar to it.
If you looking to get data after 31.03.2004, in you selction condition change the from date to 01.04.2004 and  try extracting, I am sure it will give you the desired records.
Please follow info on this link and decide which would suit to your requirement, if you get stuck, post back and I'll try to assist you.
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm
Regards,
Ray
Edited by: Rayapa on Apr 4, 2009 9:04 AM

Similar Messages

  • Repair full load

    Hi,
    I have  "Billing document" number( 9000182)  in ODS .
    For the debugging purpose I want to do  " REPAIR FULL LOAD' only for this document .
    can i do repiar FULL LOAD" for this documetn in Production system?. Is there any problem if i do repair full load. any data mismatch occurs.
    I can do selective deletion and i can do " REPAIR FULL LOAD' but my doubt is any problem will come as it is ' PRODUCTION System".
    Please confirm .U r suggestions will be helpful.
    i tried in Q system but that document was not there in R/3.

    Hi Kotha,
    If you are doing this for debugging purpose,Then no need to delete the data from ODS.
    Follow the below steps.
    1) Run  IP with options "load till PSA" and selections for Billing no 9000182(If you think it will run for longtime,do full repair or run it as full load)
    2)If you want to check thi data  in CUBE's as well then run  in simulation mode using Update rules with respect to each target.
    Hope this helps.
    Regards,
    Venkatesh

  • Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the 'resend' butto

    There is a certain website I use that I refresh frequently. Every time I do I get a pop up message labeled ‘Confirm’ with a question mark in it that says;
    “To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."
    It only seems to be a problem with this one particular site. Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the ‘resend’ button in the pop up window?

    Hi cor-el, Thanks for responding;
    I am accustomed to seeing this type of pop up on occasion and understand why they are necessary to prevent duplicating orders, payments, etc. I am not using a back button, I wanted to use an auto-refresh app to search for reservation openings on a certain web site and can not because this pop up requires me to manually push a button every time the page refreshes. I am resending the same information every time (a date range) via the POST form, so, was hoping there was a way to either disable, override, or set up and auto response so I can use the auto-refresh app. Your description of how to avoid the pop up didn't entirely make sense to me, but If I have to do a bunch of manual steps in between each refresh attempt it doesn't matter because I'm no better off.

  • I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro.  I just bought a new Mac Book Pro and just realized there is no place to put a disk.  Is there any way to load the programs to my new computer?

    I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro.  I just bought a new Mac Book Pro and just realized there is no place to put a disk.  Is there any way to load the programs to my new computer?

    Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
    Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
    Connect both computers to your local network and then share the optical drive to install the software.

  • Is there any way to load and play the iPad scrabble app on my Macbook?  i can't believe there is no scrabble app for my mac

    Is there any way to load and play the ipad scrabble app on my macbook?

    There hasn't been a Scrabble version for OS X since 10.3 -10.4 on PPC, the intel swtich and they just left.
    Scrabble owners will sue the living daylights out of anything that looks like it or uses the name.
    Would love to play on my new Mac latop
    Apple in their infinite wisdom didn't allow iOS apps to run/ported  as widgets etc on OS X Dashboard like many users requested long time ago.
    There is no Scrabble widget on Dashboard downloads page or anything close to it.

  • Give difference between full load, delta load, repair full load

    Can i run full update after delta load?? if yes tell me a scenario??Can anyone tell me the difference between all three & when to use these??
    Regards,
    Asish

    Hi,
    For Repair full load please check OSS note 689964 which is about repairing the full load by executing the program RSSM_SET_REPAIR_FULL_FLAG.
    Basically in this you provide your ODS, Data Source and Source System name and execute the program RSSM_SET_REPAIR_FULL_FLAG and hit Repair full load.
    It will repair the full load.
    But after this you cannot go directly for delta load which is for new added records or changed records. Before delta load do initialization without data loading and then go for delta load.
    So delta load will run after init run (without data transfer) and add new added record or changed records to exisitng full upload records.
    Technically you cannot go for delta load with out init load.
    So, If you have already done full load, you can go for delta load after doing initializing (init load) without data loading.
    Hope it helps.
    Regards,
    Mona

  • DAC - Can I run more then one Exection Plans with full load option enabled?

    Hello All,
    I have configured for subject Area sales – Orders, Backlog and Invoices (OBIEE)
    Now I want to run DAC to load the underline tables for subject Areas Financials – Revenue Analysis and Financials – GL Budget and Expenses, I have identified the relevant fact tables and built a Execution Plan in DAC.
    DAC - In which mode should I run the execution plan?
    With full load option enabled or disabled because already full load run is done for sales – Orders, Backlog and Invoices and this run should not disturb the existing data
    If I run with full load option enabled do it overrides the existing data for other subject area
    Please help me I am bit confused!
    Regards,
    SMA
    Edited by: SMA on Aug 18, 2009 3:36 PM

    No need of combining all the subject areas into one execution plan. Simply run the second ETL without checking the full load option. It will do the full load for the tables related to the newly added subject areas and incremental for the common tables between old and new subject areas.

  • Is there any "Search and Replace" option in Crystal Reports?

    Is there any option to search and replace in Crystal Reports. Since i am using a name in many of the formulas in crystal reports. I need to replace with the desired name on the go.
    Could anyone help me on this....

    Search & Replace across formulas is not available in CR XI but is available in CR 2008.  Here is an excerpt from the CR 2008 Users Guide:
    Searching for formula text
    You can use the Find dialog box to carry out a number of different activities:
    u2022 Search for text or characters in the Field, Function, or Operator trees.
    u2022 Search for text or characters that you want to mark or replace in the
    formula, Custom Function, or SQL Expression that you have open.
    u2022 Search for text or characters across all SQL Expressions in a report.
    u2022 Search for text or characters across all formulas and Custom Functions
    in a report.
    When you search for text across all formulas, the results appear in a pane
    at the bottom of the Formula Workshop. (You can dock the results pane in
    other locations). When you click an item in the results pane, Crystal Reports
    opens the appropriate formula and highlights the matching text.
    Tip: You can open the Formula Workshop to search across all formulas
    from the Field Explorer and from the body of a report. To do this, select a
    formula field, right-click it, and choose the "Find in Formulas" option.

  • My iTunes library on my PC only displays part of the library which is on my iPod.  Is there any way to load my PC from my iPod?

    My iTunes library on my PC only displays "A" and some "B' titles (170) of the 3800+ titles which are on my iPod.  Is there any way I can load the songs from the iPod to the PC library?

    Sync the music from yur iTujes library on yur coputer to the iPod.
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions.

  • Is there any way to load just ONE java application at the same time?

    I'm using 'jnlp' to load java applications and I want to load just one application at the same time.
    Is there any way to do that?
    I have been trying to use 'findLoadedClass' but it doesn't work.
    Also I've tried to make a file when a application is loading and delete when the application exits.
    but it has a problem when the user terminates the application.
    (the file can't be deleted...)
    The applications are using socket to receive data, all of them uses same port. That's why I want to load just one application at a time, otherwise they work wrong way.

    Do you actually mean you want to make sure that only one instance of a GIVEN Java program is running at one time? If so then search this forum becuse this question comes up frequently.

  • Is there any way to load idml file into InDesign server Programmatically

    Hi,
         I am very new to InDesign Server development. I was able to load tagged text and generate image using InDesingServer Java APIs. Now I have new scenario to generate image. My scenario is to load an idml file into InDesign Server, then I need to generate an Image using this idml file.
         Is there any way to do this using InDesignServer Java APIs.
         Thanks in advance.
    Thanks,
    Ravi Kishore.CH

    I am not aware of a direct way of loading data from excel into
    oracle. I usually export the data into Access and then through
    ODBC save the data into a new table in the DB.
    Hope this helps.
    SUnder
    Raju Gorakhia (guest) wrote:
    : I am working on forms4.5 & i am looking for the method with
    : which i can directly access the xlsspreadsheet and upload into
    : some table into oracle database.
    : If there is no such method that how i will upload that
    : spreadsheet into the database?
    : Is there any way with which i can convert the variable lenght
    : file into fix length format with some specific delimitor so
    that
    : after that i can call sqlloader & upload that file into the
    : table?
    : Thanks Regards
    : Raju
    null

  • Is there any way to load music from my computer not purchased from itunes to my iPad?

    Is there a way to load music onto my iPad that I did not purchase from iTunes?  I have loaded songs from CDs I purchased onto my computer and want to load them in my iPad.  Is this possible and how is it done?

    Is there a way to load music onto my iPad that I did not purchase from iTunes?
    yes.
    how is it done?
    the easiest way is to create a playlist with the tunes you want on the iPad and sync that playlist to it.

  • Are there any other hidden editing options?

    Thanks to this forum, I've found the redeye tool in iPhoto to be quite useful, but this wasn't the case before I found out about the Caps-Ctrl-9 trick that was posted in this forum.
    Are there any other tricks that anyone has discovered in iPhoto that isn't mentioned in the help list?
    And any speculation as to why these tools aren't mentioned in the help file? I mean, at first I was ready to give up on iPhoto because of the weak redeye. Why wouldn't they show us how to do this?
    Thanks again to everyone here for contributing and making this a great place to learn about my Mac!
    Paul
    15" MacBook Pro 2.33GHz   Mac OS X (10.4.8)  

    Paul:
    Welcome to the Apple Discussions. There is a hidden feature for changing the Redeye and Retouch tool size:
    How to Change the Size of the Retouch and Red-Eye Removal Tool
    Type Caps lockControl9
    Undo caps lock
    Click on the Retouch or Red-Eye Removal tool
    The tab key will toggle between cursor types, a cross or a circle
    The "[" and "]" keys decrease or increase the size accordingly.
    NOTE: Using the "{" "}" keys will will change the value next to the circle and that represents the degree of change or intensity that the tool imparts on each pass.
    Also check out the tip at the end of my signature for backing up the library database file on a frequent basis.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Are there any APIs to load FND and other objects

    Hi
    We are having HR2HR configured and running between EBS R12.1.3 and Fusion. But the HR2HR does not bring in data in EBS like in Descriptive Flex Fields (DFF), User Defined Tables (UDT), Extra Information Types (EIT) & Lookups. How can we bring in this data in to Fusion. Are there any APIs? If not what is the Support model from Oracle if we are directly updating the tables?
    Thanks!
    Srinivasa Sunchu

    Happy Camper: Based on doc 1482027.1 in support system:
    DFF is not currently supported by HR2HR.An Enhancement Request (ER) has been logged to request this functionality:
    ER: Bug 12883914 - ER REQUEST - DFF FLEXFIELDS AND EIT'S NEED TO BE INCLUDED IN THE HR2HR AND INTER
    >
    For alternatives and the Support model I do not have answer, will reach out to try to find out.
    Kiran: This is an external forum, so the readers would not have access to internal documentation. Are the HCM scripts available externally i.e. through the support system? If not are there plans for providing them externally ?
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • I keep on forgetting ALT B (I think that's it). Is there any way to add options to the bookmark pulldown, specifically "Bookmark all Tabs" ?

    I keep on forgetting <ALT> B (I think that's it)?
    Is there any way to add the "Keep All Tabs" to the pulldown Bookmark menu?

    You can make all hidden menu entries visible with this code in userChrome.css below the @namespace line.
    * http://kb.mozillazine.org/userChrome.css
    * http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #navigator-toolbox menuitem[class="show-only-for-keyboard"]{ display:-moz-box!important; }
    </nowiki></pre>

Maybe you are looking for