Is there any restriction on number of recipients in RecipientType.TO or BCC
Hello,
I wanted to know whether is there any restriction on number of recipients in Message.RecipientType.TO or BCC..
Please clarify
Thanks in advance
Pradeep
JavaMail imposes no limits, but your server might.
Similar Messages
-
Is there any restriction on number of "origin file" dhcp pool command
Peace be upon you.
I'm using ISR1841 and adding dhcp pools with static mapping for every vlan in my environment. After a number of successful adds "origin file" command in ip dhcp pool seems to be accepted but nothing changes in running config.
PS I'm using flash: as a place to store static mapping filesJavaMail imposes no limits, but your server might.
-
Is there any restriction on the length of all Primary keys in a table
Hi all,
Is there any restriction on the length of all Primary keys in a data base table?
i have some 10 fields as primary key in a DB table and length exceeds 120 and getting a warning.
Please let me know will there be any problems in future with respect to the same?
With regards,
SumanthWell actually there are constraints like
Total of internal lengths of all primary key columns 1024 Bytes
Number of primary key columns per table 512
For other information about SAP database please refer to http://sapdb.org/sap_db_features.htm
Thanks & Regards,
Vivek Gaur
Alwayz in high spirits -
Is there any restriction on no of entries in Select-option-low ?
Is there any restriction on no of entries in Select-option-low ? I have a select option which has 22 thousand entries and the select query is thrwoing a dump.
Any inputs ?
Regards,
Ankur BhandariHi Ankur,
1. i had faced same problem.
2. Virtually the limit in SELECT-OPTION low
is not the problem.
3. The problem is with SQL query and database limit.
4. The R/3 system generates final database query
in the form of (for select option)
FIELD IN ('ABC','DEF','XYZ',........'')
5. Now Oracle/SqlServer
has limit of THESE IN VALUES.
limit is something in 2500 approx.
6. So your approach will not work
using IN.
It will always give error when
entries are more.
7. SOLUTION which i did.
1. First select all appropriate records from
master table in your itab
(without using IN select option clause)
2. After that use this concept.
Loop at ITAB.
If Itab-Field in SelectOption.
Else.
DELETE ITAB.
ENDIF.
The above will take care for any number of records.
I hope it helps.
regards,
amit m.
Message was edited by: Amit Mittal
Message was edited by: Amit Mittal -
Is there any restriction on DDL replication with 11.2.0.1 GG version on HP UNix
Is there any restriction on DDL replication with 11.2.0.1 GG version on HP Unix
Here is few:
1. ALTER TABLE ... MOVE TABLESPACE
2. DDL on nested tables
3. ALTER DATABASE and ALTER SYSTEM (these are not considered to be DDL)
4. DDL on a standby database
In addition, classic capture mode does not support DDL that involves password-based column encryption, such as:
1.CREATE TABLE t1 ( a number, b varchar2(32) ENCRYPT IDENTIFIED BY my_password);
2.ALTER TABLE t1 ADD COLUMN c varchar2(64) ENCRYPT IDENTIFIED BY my_password
I would request you to check documentation. you can check that here:http://www.oracle.com/technetwork/middleware/goldengate/documentation/index.html
-Onkar -
Is there any limit on Number of items that can be created in SBO2005B
Is there any limit on Number of items that can be created in SAP Business One 2005B.
We are working for button manufacturer.
Each button will have type,color, size, thickness.
There are about 100 types, 40 colors, 30 sizes, 10 thickness, 500 models.
It looks to be approximately above 30lacs item codes has to be created.
Is there any performance issues or any other known issues towards the large item lists.Hi,
There is no real limit on the number of items you can create (well, the item code is a 20 character key so theoretically the limit is the total number of possible combinations of letters and characters in that key).
Performance can be an issue with a large inventory, as well as database size (particularly if you have a large inventory and a large number of warehouses). Some issues such as the speed of lookups can be avoided by changing system settings but other issues such as the speed of inventory reports are inevitable going to take longer for larger inventories.
Have you done any research on looking for SBO addons for the clothing industry? It might be worth searching the CPSN for such addons (ie ones that can deal with sizes, colours etc) as these may help greatly in keeping the number of stock items down to a minimum.
Kind Regards,
Owen -
Is there any restriction to use ora:getFaultAsString() ??
Hi All,
I am using Jdev and SOA 11.1.1.2
I have a process and in that I am using a transforation.
I have tested below scenarios:
1) We have a dateconversion function, and i passed in correct value to that function so it got faulted and throws subLanguage Exception.
2)I have given wrong DVM name, so again it got faulted and throws subLanguage Exception.
3)I defined an XSL variable and used that in another template without passing, so it got faulted and throws subLanguage Exception.
4)I used a substring function without giving starting and ending indexes..so it got faulted and throws subLanguage Exception.
I have a catchAll and in that i am sending notification and in that notification i am using conact('CustomInfo',ora:getFaultAsString())
I found that except in 4th scenario in all scenarios ora:getFaultAsString() is returning null .(Even for 1,2,3, scenarios it is giving javax.xml.transform.TransformerException and for 4th scenario itis giving Fatal Error)
I am giving errors returned below
SubString Error(Successful)
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: XML-22900: (Fatal Error) An internal error condition occurred..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
</summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>
DVM Error
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 441,
Column 233>: XML-22044: (Error) Extension function error: Error invoking 'lookupValue':'oracle.tip.dvm.exception.DVMValidationException:
Unable to locate DVM "oramds:/deployed-composites/ZDVM_STOP_TYPE_rev1.1/STOP_TYPE.dvm"
The Exception is "MDS-00013: no metadata found for metadata object "/deployed-composites/ZDVM_STOP_TYPE_rev1.1/STOP_TYPE.dvm""
Please ensure the DVM exists at the location specified.'.
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
</summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>
Date Format Error
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 135,
Column 196>: XML-22044: (Error) Extension function error: Error invoking 'convertFormattedDttmToXSDDttm':'java.text.ParseException:
Unparseable date: "10/17/201114:52:25"'.
Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>
When a XSL variable is out of scope
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<subLanguageExecutionFault>
<part name="summary">
<summary>XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is
ora:processXSLT('xsl/TransformSiebelOrderABMToTransportationOrder.xsl',bpws:getVariableData('receiveSiebelOrderABM_Consume_Message_InputVariable','body')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException:
<Line 52, Column 50>: XML-22031: (Error) Variable not defined: 'Param'..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary>
</part>
<part name="code">
<code>XPathExecutionError</code>
</part>
</subLanguageExecutionFault>
</bpelFault>Is there any restriction to use ora:getFaultAsString()
Please guide me
Regards
PavanKumar.MHi Pavan ,
We frequently observe the following error in our logs:
<Feb 11, 2011 11:12:50 AM CET> <Error> <oracle.soa.bpel.engine.xml> <BEA-000000> <BPEL1AssignWMP
ORABPEL-09500
XPath expression failed to execute.
An error occurs while processing the XPath expression; the expression is ora:processXSLT('xsl/Xform_CustomerPartyListABMReqMsg_to_CustomerPartyEBMReqMsg.xsl',bpws:getVariableData('SyncCustomerPartyListReqMsg','SyncCustomerPartyList'),bpws:getVariableData('params')).
The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: <Line 15, Column 98>: XML-22031: (Error) Variable not defined: 'endIndex'..
Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
Can you please share ..how you resolved it?
Regards,
Shagufta
Edited by: 830719 on Feb 11, 2011 2:34 AM -
Is there any restriction on no of page or no of char from spool
could u pls tell me is there any restriction on no of pages or no of char from spool no into internal table in background mode when sending mail to external id.
foreground it is working fine.
code here..
TABLES tsp01.
DATA: list LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: txtlines(15000) TYPE c OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF reportlines OCCURS 0,
data(132) TYPE c,
END OF reportlines.
DATA: first_line TYPE i,
last_line TYPE i.
DATA: v_syspono LIKE tsp01-rqident.
DATA mi_rq2name LIKE tsp01-rq2name.
DATA f_repid LIKE sy-repid.
DATA v_rqident LIKE tsp01-rqident.
START-OF-SELECTION.
DO 120 TIMES.
write: / sy-index,
'Hello'.
ENDDO.
TOP-OF-PAGE.
f_repid = 'ZMAIL7'.
CONCATENATE f_repid0(9)'_' sy-uname0(3) INTO mi_rq2name.
SELECT * FROM tsp01
INTO tsp01
WHERE rq2name = mi_rq2name
ORDER BY rqcretime DESCENDING.
v_rqident = tsp01-rqident.
EXIT.
ENDSELECT.
IF sy-subrc NE 0.
CLEAR v_rqident.
ENDIF.
END-OF-SELECTION.
WAIT UP TO 50 SECONDS.
v_syspono = v_rqident.
v_syspono = sy-spono.
SUBMIT rspolist EXPORTING LIST TO MEMORY AND RETURN
WITH rqident = v_syspono
WITH first = first_line
WITH last = last_line.
Getting spool content to internal table
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = list
EXCEPTIONS
not_found = 1
OTHERS = 2.
*Spool content in Ascii format
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listobject = list
listasci = txtlines
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.Hi
now i'm using only this fn module
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = V_rqident
first_line = startline
last_line = endline
desired_type = 'RAW'
IMPORTING
real_type = real_type
TABLES
buffer = LT_TEXT
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
IF sy-subrc <> 0.
EXIT.
ENDIF.
i'm getting mail correly if it is online/foreground.
if it is background only first page i'm getting
.spool is having the correct/all data.
if in foreground i hardcoded the spool no to the above fn mdoule it is working fine.
i feel there is some restriction in background
just now i searched in net. i saw some below msg
If you run a report in the background that has more than 255 characters in the output, the spool cuts the output to 255 characters. An OSS Note has been applied to the system which created a new output format that allows for up to 380 characters of output in the spool. When you rerun the report, the TOP-OF-PAGE contents all get outputted in complete, but the data for the report (all WRITE statements after TOP-OF-PAGE) gets cut off at 255 characters. It works fine for an ALV report but it doesn't work for a regular WRITE statement report.
Kumar -
HiiMessages and FaceTime could not be used.is there any restrictions in oman for usage ?, iMessages and FaceTime could not be used.is there any restrictions in oman for usage ?
Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H -
If the occi can work with TUXEDO well ,is there any restricts?
we want to use occi to access oracle in TUXEDO serive.
If the occi can work with TUXEDO well ,is there any restricts?
who can describe how to use , step by step.
THS a lot !
mails:[email protected]Hi,
Yes OCCI can be used to access Oracle database from Tuxedo. If you want Tuxedo to manage transactions for you then you need to follow essentially the same approach as in using OCI or Embedded SQL. Since you are accessing a resource manager, you will need to define an OPENINFO string in the Tuxedo RM file located in the udataobj directory of the Tuxedo installation. Likewise you will need to build an RM specific TMS for the Oracle Database and specify the name of the RM entry in the buildtms and buildserver commands with the -r switch.
Before going into a step by step set of instructions, can you describe what you know about Tuxedo and OCCI? Have you built Tuxedo servers before and have they accessed a resource manager?
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Is there any field " Batch number index" in Batch Management
Hi
Is there any field " Batch number index" in Batch Management.
My clients requirement:
Currently raw material batch allocation to the process orders is based on batch number index. Clent does not enter manufacturers date when materials are received and hence the numeric batch number serves FIFO correctly based on batch creation date.
Change needed - Planning to change the business process to enter the manufacturers date for each raw material batch receipt so that Shelf Life Expiry Date comes in to play and expired dated raw material does not go into Process production.
Is there any other solution linked or not linked to the above "Batch number index" ??
Kindly reply ASAP
cheers
Maruthi Ramhi,
Hope Charge Number is the Batch Number.
May be i am wrong.
Reward points if it is helpful.
Regards,
Sangeetha.A -
Is there any restriction for the types of components in a tool bar.
Hi, i'm using a tool bar where i'm having different command buttons and an "<af:inputFile>" component.
In one of the command button i'm having "<af:setPropertyListener>" component. This command button is not being used as a partial trigger by any other component. If i invoke this button i'm getting "Assertion failed:Incorrect use of AdfRichUIPeer.GetDomNodeForCommentComponent" error.
if i remove the either the "<af:inputFile>" or the command button having "<af:setPropertyListener>" from the tool bar then there is no such error.
is there any restriction to use different components in a tool bar. Please clarify me . Thanks.Thanks for your inputs. But non of the component using the attributes "rendered". And non of the components is being partial trigger for other components. Please let me know what else could be the cause. Thanks.
-
Is there any limit on number of firefox profiles that can be created?
Is there any limit in the number of firefox profiles that can be created?
My issue is
I am currently doing selenium webdriver automation in linux for a device. There are 50 devices of same kind and framework will pickup a device depending on availability. I need to by pass unsigned ssl pages. I am using firefox 14.
I have implemented following but it is not consistent.
everytime a device is chosen
adds cer of device to the cert file in firefox profile
but I am getting sec_error_bad_signature very frequently.
So I started recreating cert [delete and create if by opening firefox] file for every run.
Now this is posing a problem if multiple devices are run at the same time. Hence I want to create separate firefox profileNot that I have ever found. And at one time I had over 60 Profiles, but after I hit 20 Profiles listed in the profiles.ini file the launch time for Firefox became noticeably longer on WinXP. With remote Profiles, not listed in the profiles.ini file and launched strictly from command line there was no impact on launch time.
How or if that relates to Mac OSX is beyond my knowledge, never owned used a Mac. -
Is there a limit to number of recipients for an email?
I need to send the same email to about 250 people.
Is there a limit to the number of recipients Mail can handle in the BCC field?
At the moment I can get all the address's from a spreadsheet as Comma separated text.
Will this pasted into the BCC field work?
Lion 10.7.2 Mail 5.1
Thanks in advance
DYou will need to check with your ISP; they may have limitations - mine does in order to cut down on spamming.
Once you find out if/what that limit is, you can simply type and email once, copy the content, enter the addresses, and send out 5 - 10 - or whatever number of emails successively until you've sent it to all 250 people.
I would create a group or at least have all the names/addresses in the Addressbook; that way, you can start typing the first name and Mail will automatically add the email address for that name. And yes, it is good to use BCC for that - send it to yourself and BCC everyone else. -
Are there any restrictions on TIMESTAMP BY
Hi
I want to ask if there are any restrictions on the values given to TIMESTAMP BY?
For example how old could that value be? Are very old messages discarded?
Or what happens if a message arrives which has the same timestamp as a previous one that is still on the service bus?
RegardsHi
Gökhan!
I expect that this distinction is caused by the Event Hub retention policy. Our job may be failing because because the start time falls below the Event Hub retention window, and we do not support that scenario...
I am afraid I would still recommend putting the data into a blob for back-testing --- you can use the same query and everything!
Or, of course, adjust the dates in your sample data...
Thanks,
--Lev
Maybe you are looking for
-
When I start up boot camp and put my Windows 7 with service pack 1 x64 Ultimate edition DVD in, boot camp doesn't recoginze the disc. I can put in my Windows 7 Service Pack 1 x86 Home edition and everything works fine. Can anybody help me out? My mac
-
N95- cannot increase the volume using the volume key.is there any other way i can increase the volume of music on music player. Message Edited by ashtraykid on 12-Aug-2008 01:18 PM
-
I accidentally set up my new ipad in itunes under the name of my existing ipad and need to set it up as a new device. Help. I cannot find a way to start fresh.
-
How to start with datamodelling
*Am a starter in Datamodellinga nd my task is to create a DataModel for Health Care ,* *Can anybody tell me on what are the things that should be collected to start with LDM , and steps to create a LDM and PDM .* *Please guide on the requirement gath
-
ERROR: Invalid java version found: while runing Autoconfig
Hi while upgrading EBS 12.1.3 Database from 11.1.0.7 to 11.2.0.2 We got the below error on autoconfig. F:\app\mocppd\product\11.2.0\dbhome_1\appsutil>F:\app\mocppd\product\11.2.0\dbho me_1\appsutil\bin\adconfig.cmd contextfile=prod_srv-moc.xml Enter