Is there any SAP Standard programe to posr cost centers in LSMW
Hi
Is there any Direct input or Batchinput programe to load cost centers
by using LSMW
No. Also a note that these tables store data in a different way. Meaning that if say for a material , period and plant combination (primary keys of tables) the value of stock has not changed then there will be no entry in these history tables. So usually you would need to write a Function module to read these tables and populate values accordingly for BW reports to make sense.
Hope this helps.
Similar Messages
-
Do we any SAP Standard program to Send IDOC of Type CODCMT01
Do we any SAP Standard program for outbound processing for IDOC Type CODCMT01
Message was edited by: Vipin Nagpal- If it is for test purpose only, you could use transaction WE19 (Test Tool).
- As well you could write your own program and user MASTER_IDOC_DISTRIBUTE function module... but in this case you need to fill yourself the fields of the IDOC
- as well you can have a look at function group KALE...
E.g. function module K_DOCUMENT_SEND -
Is there any SAP standard HUM report
Hi Guys
Is there any SAP standard HUM report
which can have the fields like Contents of HU field and HU identification2 field
Please help
Thanks in advanceHI
Run T code HUMO -
Is there any SAP standard CAF?
Hi, CAF experts.
I'm wondering there is any CAF created by SAP, like ESS/MSS.
Does SAP make any CAF-based application?
Thanks in advance for all your answers.Hi
I am not sure if SAP has released entire business package based on CAF but there is one application called Life and Work Events within ESS which uses CAF.
Best Regards
Prabhakar -
SAP standard program to delimits infotypes
Hi folks,
Is there any SAP standard program to <u><b>delimits</b></u> the records in HR? I mean for PA/PD infotype. Or I need to write one? I have to delimits some of the IT`s Like 194 and 185...
I found the following program to <b>delimit</b>
RPU204M0 IT 204: delimit report for FA customers
RPU510J1 Utility program to delimit P0008 after pay sclae re-creation
ThanksHi Saquib
There is one standard report called RHGRENZ2 which will delimt PD infotypes...
The report only delimits infotypes with time constraint 2 and 3. Infotypes with time constraint 0 and 1 must be delimited using the report Delimit Objects (RHGRENZ0).
Hi I don't see any Standard SAP program to delimit the infotypes that were specified in your message. I believe you may need to write small BDC program to delimit....
Thanks
Thanks
Suresh B Mannem
Message was edited by: Suresh Babu Mannem -
How to add custom fields to the sap standard program ukm_bp_display
How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
partner LIKE but000-partner,
credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
INCLUDE STRUCTURE ukm_s_account.
INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA: credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
Gruppe Vector
INCLUDE STRUCTURE ukm_s_bp_vector.
Gruppe OBL = Obligo
include structure UKM_S_BP_CMS_MALUSDSP_OUT.
INCLUDE STRUCTURE ukm_s_display_segment.
INCLUDE STRUCTURE ukm_s_bp_cms.
INCLUDE STRUCTURE bus000_dat.
*DATA: icon(4).
Gruppe RAST (Raster)
DATA:
rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA: rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas -
Addition of my code in sap standard program
hi gurus,
can i add my code in the sap enhancement below in sap standard program
i want add the logic below.
ENHANCEMENT-POINT MATERIALFINDUNG_10 SPOTS ES_SAPFV45P.
$$-Start: MATERIALFINDUNG_10----
$$
ENHANCEMENT 153 OI0_COMMON_SAPFV45P. "active version
IF NOT G_OIK_SUBMAT IS INITIAL. "SOTK000026 DN
TVAK-KALSU = G_OIK_KALSU. "SOTK000026 DN
CLEAR PRODUCT_SELECTION_REKURSIV. "SOTK000026 DN
ENDIF. "SOTK000026 DN
ENDENHANCEMENT.
when i click on enhance button(shift+F4) it does not give me any place to write.
but if i click on the enhancement name i am able create one implementation. is that ok.should i add my code there.Hi Kiran,
That is not the solution I am looking at. Also the link provided within the link you provided does not work which is:
http://www.synactive.net/site/index.htm
Do let me know if you have a solution to change the standard GUI status(Not by copying nor by using the access key) either by any menu exit or something of that sort.
Regards,
Deepak. -
How and where does SAP standard programs update the master tables...
Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh BHello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh -
Runtime Error In copy Of SAP Standard Program
How do people,
I have copied a SAP standard program H99CWTR0 because I need to add an extra
column output in the report. I have made a few chnages regarding the INCLUDES
When I run the program I am getting the following runtime error:
" The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
in program "%_T01050" is different from the calling program .....
My question is that it says the error in program "%_T01050" !!
But when I enter this in SE38 it says it doesn't exist !
Any ideas???
AndyThanks mate for replying.
I'll have a look at what you suggest
Andy -
Modification in SAP standard programs.
Hi All
I am trying to make modification in SAP standard program by using a copy of code from the original program to my program..but facing many errors like the statement BEgin of block syntax is wrong..
i am trying to mdify the foloowing program--RFSSLD00...
Please help me and guide to make changes to this prog..
Also tell me that do we need to again create all the functiongroup and global data declarartion part.
thank u.hi,
Please note that when you copy a standard Sap Program ,make sure all the objects are copied following your compays naming conventions.
Now RFSSLD00 can be copied without any difficuly.after that compare the new copied program with the standard program. going to version mngmt->remote comparison . doing this you can get the differences
check all the includes.. and type pool declartaion and gui status etc....by going to se80
regards,
Safel -
What are the SAP standard programs?
Hi PM Guys,
I have a question that is as below:-
We have the following Master Data:
1) Functional Location
2) Equipment
3) Equipment BOM
4) Counter
5) Catalog Profiles
6) Task List
a) General Task List
b) Equipment Task List
7) Maintenance Plans
a) Time Based
b) Performance Based
Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
Thanks in Advance,
Vijaya KrishnaHI
you can find the standard program while executing the T code LSMW itself.
type LSMW ,specify the description in the next screen select the <b>Standard batch or direct input</b> under the heading you can find the in the field <b>object</b> use F4 to find all the standard programs in SAP
0400 Equipment
0410 Message (IH)
0420 Confirmation (IH)
0425 Measuring point
0430 Measurement Documen
0440 Functional location
0450 Object link
0460 Maintenance plan
0470 Equipment task list
0480 FnctnlLoc.TaskList
0490 Gen.task list
regards
thyagarjan -
Is there any SAP tool to run reports on different report server versions
Hi,
I have to run crystal reports on different report server versions. This is a repetition of the tasks as it requires installation of report servers and executing reports on both. Is there any SAP reporting tool which simplifies all these tasks , runs the report at the same time on different report servers and gives output for both executions?
Thanks.Hi,
I have to run a single CR report on different versions of CR report server for validating if the report runs correctly.
So can be it done like a scheduler which then generates report result files.
Thanks. -
Any SAP standard report is used to retrieve the inventory number based Asse
Hi all
Any SAP standard report is used to retrieve the inventory number based Asset ID.
Please help us to provide the standard report.
Regards
K.GunasekarHi,
Create the Sort version with field Inventory no, so that you can display Inventory no details in all Asset report.
You can get "Inventory no" details by including field "INVNR" in Sort versions for Asset reporting(T.code - OAVI).
Hope this information helpful for you.
Thanks & Best Regards,
M.Ganesan -
Syntax error in SAP-standard program
Hi experts,
i am facing syntax error in sap standard program.how i can solve that error .
Error in include LFKPZTOP and errro is at line 70.
please help me ASAP.
Thanx & Rgds
ZebaHello Zeba,
go to include LFKPZTOP and check in line 70.
if you are not able to solve that.
post the same line, so that we can understand what is error.
as of my checking the error is "iban is already defined in the include structure bus0bk ,
but i think it dosn't effect your programing.
Regards!
Edited by: Prasanth M on Feb 10, 2009 5:04 PM -
How to fnd SAP STANDARD program of Database table
Hi to all,
Please can anybody tell me , how to find out SAP standard program of database Tables S070 (Breakdown Statistics).
As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
i shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
Thanks,
Vinod.
Maybe you are looking for
-
- installed a new updates for windows last night and restarted my PC -When I open my Firefox browser it sits at a white screen, with nothing in the URL area. -When I try to go to a website it reloads says "New Tab" and doesn't load any content and st
-
My new hp photosmart 7525 won't print
my new hp photosmart 7525 won't print and says it is "offline". In addition, the tray app error keeps coming on. I uninstalled my old printer. I have Vista.
-
Gutenprint with HP 2100--hangs up between print jobs. Help?
Working on hooking up HP Lazer Printer 2100 with OS 10.9.1 Have successfully installed Gutenprint 5.2.9 and usbtb USB hookup to computer (Mac Pro). Printer working but only one job at a time. After each print job, the queue hangs up (saying printer n
-
Embedded Quote in an SQL Statement
How do you embed a double quote in a java string? I'm doing some processing where I need to generate and execute some SQL, but I need to wrap the string in double quotes, something like: select sysdate "My Column Header" from dual; I've been using th
-
Cisco Prime Infrastructure 2.1 High availability Question
Hello All, I am configuring high availability for two prime infrastructure 2.1 servers. I have configured manual HA between the servers. I need to know what will be the configuration in the devices ( switches,routers etc.) for proper working of the H