Is There Any Secret Code?

Hi all,
I've recently heard that there are codes that can make voice calls cheaper, or even at no-cost. I wonder if there exist any, & what are those codes (specially for N70),& Why did the company put such codes on the phones?

Leave well alone. I've heard of this sort of thing before. It's a hoax and a way of getting your mobile phone details and using them. All you end up with is a very large bill for calls you didn't make. As others have said previously if this was possible we would all be doing itNo there exist such code for atleast the nokia n80 phones
For soft reset (that don't erase u r data) code
*#7780#+passord(Default is 12345 for nokia)
(e.g. *#7780#12345 )
For hard reset (that erase u r data) code
*#7370#+passord(i.e. Default is 12345 for nokia)
(e.g. *#7370#12345 )
use this code on ur own risk
i am not responsible for any damage done due to this codes.
But, these code does exist thats why i have given u these code.

Similar Messages

  • How to do advance payment against PO for this is there any T.code

    Hello,
    Lt's say for ex: Once Po is created how to pay the advance payment against PO to the vendor, for that is there any transaction code.
    Once advance payment is made against PO, again system should not allow for ammendement
    So like this to control the system what are the configuration settings need to be done please explain
    Early action in this matter will be highly appreciated.

    Hi,
    Apply the user exit : EXIT_SAPMM06E_016
    Following Logic can be use:
    1. Validate the company code (BUKRS ) & Purchasing document type (BSTYP = F) from EKKO table for the Purchase order number (EBELN).
    2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is any down payment document exists (VGABE = 4)
    3. If we find down payment doc in EKBE table then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
    Step 1: Validate Company code and Purchasing Document type from EKKO table
    Step 2: Check the Purchasing document history from EKBE table
    Step 3: Check whether any down payment exists.
    Step 4: Display popup message to user:
    Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CPo cannot be changed, Down payment already exists for this PO item u201D.
    Edited by: redriver on Nov 27, 2011 10:06 AM

  • Is there any transaction code for uploding logo in ALV reports.

    is there any transaction code for uploding logo in ALV reports.

    hi,
    call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
                i_logo             = 'Z_LOGO'.
    endform.
    Upload Logo for REUSE_ALV_COMMENTARY_WRITE
    For those who wish to upload and use a picture in your ALV abap reports.
    Steps for uploading Logo :-:
    1. Goto the transaction OAER
    2. Enter the class name as 'PICTURES'
    3. Enter the class type as 'OT'
    4. Enter the object key as the name of the logo you wish to give
    5. Execute
    6. Then in the new screen select Standard doc. types in bottom window
    Click on the Screen icon
    Now, it will ask for the file path where you have to upload the logo
    7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
    or
    Import Logo and Background Picture for Reporting
    In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
    From the SPRO:
    HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
    Activities
    1. Enter the Name of your logo/background picture as an object key in the initial screen.
    2. Make sure that the class name is PICTURES, and the class type is OT.
    3. Choose Execute.
    4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
    5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
    6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
    Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
    If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
    Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

  • Is there any t-code in which the List of Customers Display?

    Hi SDN,
    Is there any t-code in which the List of Customers Display?
    Like the MKVZ, this is the t-code for List of Vendors Display.
    Thanks,
    Sumit.

    Hi,
    Following tcodes are related to List of customers.
    MER5                   List of Customer Rebate Arrangements
    RBPCT                  List of Customer Contacts
    SWU5                   Consistency Test for Customer Task
    S_ALR_87009951         List of Customer Open Items
    S_ALR_87009952         List of Customer Open Items
    S_ALR_87009958         List of Customer Addresses
    S_ALR_87009963         List of Customer Open Items
    S_ALR_87009975         List of Customer Line Items
    S_ALR_87009976         List of Cleared Customer Items
    S_ALR_87012173         List of Customer Open Items
    S_ALR_87012174         List of Customer Open Items
    S_ALR_87012180         List of customer addresses
    S_ALR_87012185         List of Customer Open Items
    S_ALR_87012197         List of Customer Line Items
    S_ALR_87012198         List of Cleared Customer Items
    S_ALR_87015021         List of Customer Open Items with Ren
    VC/1                   List of Customers
    VXBC                   SLS: List of Blocked Customers
    Thanks,
    RKP

  • Is there any t code in SAP to display archived shipping

    Hi All
    we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
    for archived billing documents once thay are unzipped , document will not open in vf03 but we can display in vf07
    Please let us know how to view this shipping data in sap ?
    Is there any t code in SAP to display archived shipping data (like for archived billing dicuments vf07)
    Your kind help would be highly appreciated.
    Thank you
    Rajendra Prasad

    Hi Rajendra,
    Whats your SAP version? VT03n supports display of archived data from 4.7onwards. If you are in a lower version then i think you should use infostructures.
    Thanks,
    Naveen

  • Is there any t code in SAP to display archived shipping data

    Hi All
    we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI  theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
    for archived billing documents once thay are unzipped , document will not  open in vf03 but we can display in vf07
    Please let us know how to view this shipping data in sap ?
    Is there any t code in SAP to display archived shipping data (like for archived billing dicuments  vf07)
    Your kind help would be highly appreciated.
    Thank you
    Rajendra Prasad

    Hello,
    Once shipment document is archived then you can't display by VT03N transaction. As you have pointed out SARI or SARE transaction will help in displaying the archived shipment documents from archive server. (you have to select Archiving object = SD_VTTK and Archive Infosturcture = Select from display option).
    VF07 - Display archived billing document. We call this transaction VF07 as archived enable transaction.
    I have gone through the OSS note 590656 mentioned by Eduardo Hinojosa, with this enanchment of VT03N (respective program) you should be able to display archived shipment document. This Oss note should help you.
    let me know if required further clarification on this.
    -Thanks,
    Ajay
    Edited by: Ajay Kumar on Aug 25, 2009 6:16 AM

  • Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

    Experts,
    Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
    Thanks in advance
    Krish

    Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

  • Is there Any T-code similar to

    Hi All,
    Is there any T-code similar to WPER tcode
    We use WPER Tcode in Retail area to see the Inbound & Outbound Idoc Processing Errors or success messages
    Is there any other Tcode which is having similar work capabilty
    Regards
    Suman

    Hello ,
    Check this Link,
    http://www.techhairball.com/concepts/SAP_Retail_Transactions_List.htm
    *****Reward points,if found useful

  • Is there any T-code in which we edit the name of our company?

    Is there any T-code in which we edit the name of our company?
    Actually what a prob. is i made a smartforms in which i pick the name of may comany but its too long so i want to edit my company name so that the databse pick the name & its shown in the form.
    The table is ADRC in which the company name is shown.
    Thanks,
    Sumit.

    Hi,
    you want to display VARDHMAN POLYTEX LTD-Unit 2 Expansion as  VPL- Unit 2 Expansion. in output.
    For every Adress number you have option of NAME1 and NAME2.
    NAME1  : VARDHMAN POLYTEX LTD-Unit 2 Expansion
    NAME2  :  VPL- Unit 2 Expansion.
    If you are taking company code name in your samrtform.  Ask your functional consultant to maintain NAME2  in company code address.
    T.code for company code OX02.
    Regards,
    Chandra
    Edited by: chandra sekhar S on Oct 8, 2008 1:18 PM

  • Is there any transaction code for Report Designer,Query Designer and WAD

    HI Gurus,
    please tell me s there any transaction code for
    1 Report Designer
    2 Query Designer
    3 WAD
    Thanks in advance
    Prashant

    Hi Prashant,
    We don't have any Transaction Codes for these.
    Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
    You have to use only .
    Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
    Hope it helps.
    Reward with points if helpful.
    Regards
    Hemant Khemani
    Edited by: Hemant Khemani on May 16, 2008 5:39 PM

  • Is there any t.code for getting list of deliveries not yet invoiced?

    Hi,
    Is there any t.code or report where we can get the list of outbound deliveries not yet invoiced, and also the value for how much it will be invoiced.
    For example, I have one order with net price as 100, and it has outbound delivery created and not yet invoiced. I want a list of those deliveries with the net price of the quantity delivered.
    Do anybody have any idea on this ?
    Thanks
    Surya

    Hi All,
    In VF04 and VL06F we will get list of outbound deliveries, but I want the information in such a way that if that delivery is invoiced for how much value it will be invoiced? so, the list should contain the delivery number the value for how much the invoice will be created.
    Thanks
    Chandramouli

  • Is there any J2MEsource code on Samsung S100/200/300 available ?

    I'm a beginner, I am trying to design J2ME programs on Samsung S100/200/300. But the emulator for Samsung S100/200/300 could not run the my j2me programs, even the demo of J2ME Wireless Toolkit could not either. So, I am searching for a copy of J2ME source code on Samsung S100/200/300. Is there any one know how can I get it?
    My English isn't well, Thank you very much!

    i have developed one j2me aplication to run on samsung emulator. It is working fine. i have downloaed one samsung emulator for sgh-s300 model.
    as u experienced it wont run in wtk.
    if u want i can send u the url from which i downloaded.
    for easier and faster communication better u send me your email ID.
    hope it is [email protected]
    regards

  • Is there any t-code to upload Asset Balances other than OASV

    Hello Genius,
    Is there any other T-code to upload Asset Balances other than OASV.
    Please guide me in detail
    Regards
    JS

    if you ahve uploaded assets with AS91 then it would ahve already posted to the Asset accouting sub ledger, but  not to the GL. So you ahve to use OASV to post to the GL.
    Posting using ABSO will post to both the AA and the GL resulting in duplicate entry in the Asset accoutning
    you can use ABSO only when creating the asset master with AS01.

  • Is there any T-codes for all these............

    Hello all
    I came to know that there are T-codes for all these like
    Infoprovider,Infosource,PSA and etc.........
    pl let me know
    regards
    balaji

    Hi Balaji,
    the tcodes are
    rsa11   InfoProvider
    rsa12   InfoSources
    rsa15   PSA
    Have a look in Tabele TSTCT, select your language an filter for transaction RS* to get a list of most BW-related Transactions
    regards
    Robert

  • Are there any good code examples for displaying preview images in the storefront?

    I can gather other info using folio.xxx, but can not find any good examples to use for preview images.  Tried folio.getPreviewImage() with no success.  Oh, I should mention it is version 2.  Plenty of examples for version 1.
    Perhaps if I get a little more specific.
    I am calling up the folios via:
           adobeDPS.libraryService.folioMap.addedSignal.add(function(folios) {
                for (var i = 0; i < folios.length; i++) {
                    addFolio(folios[i]);
            }, this);
    This eventually works into a function where I am gathering and displaying folio data:
         var productId = folio.productId;
        var html  = "<div id='" + productId + "'>";
            html +=     "<a href='#'><img class='shadow' width='120' src='' border=0 /></a>";
            html +=     "<br /><span class='bold'>" + folio.title + "</span>";
            html += "</div>";
        this.$el = $(html);
    folio.title works fine to pull up the title, but I can no longer use folio.getPreviewURL in v2.  What code should I be using to set the src to the preview image?
    Thanks

    Have you looked at the default implementations of the library?
    In FolioItemView's render function, there is a function(follow the nested functions!):
    setTimeout(function(){ scope.loadPreviewImage() }, 100);
    It references this function (this doesn't copy well):
    loadPreviewImage: function() {
    if (this.el.parentElement) {
    var transaction = this.folio.getPreviewImage(135, 180, true);
    transaction.completedSignal.addOnce(this.getPreviewImageHandler, this);
    Going deeper, into the getPreviewImageHandler function is where you see the url value..
    if (transaction.state == adobeDPS.transactionManager.transactionStates.FINISHED && transaction.previewImageURL != null) {
                                  this.$el.find(".folio-thumb").attr("src", transaction.previewImageURL);
    Within the example is also code for supplying a preview when the Adobe API is not available:
    (Within the render function)
    var json = this.model.toJSON();
    $folioThumb.attr("src", json.libraryPreviewUrl);
    If you're making any changes to where the preview is displayed, you can just swap out the class ".folio-thumb" to whatever the class (or id) is of the element you're wanting to render the preview in.

Maybe you are looking for

  • Video out to external display

    Hello, Is there a way to get video out to an external display? I currently have a T5, but am getting a TX. Should be the same for each, though. Rregards, Karl Post relates to: Palm TX

  • String Format

    J2ME has got no StringTokenizer or .split method for string manipulation, i came up with an algorithm to do something of the sort. Here is my problem, the string i want to split is a string of midi files got from Oracle via a servlet. The String is:

  • Modbus I/O server & Shared Variable Engine

    小弟做專題用到Labview,想請教一個問題,目前是用labview對智慧電表讀取資料 主要用modbus I/O server(TCP/IP模式)和shared variable engine 但是網路上大多數資料是教學如何建立I/O server和設定shared variable 小弟想知道背後理論是什麼? 例如:labview如何對modbus TCP/IP的封包進行處理,並取出所要資料. 謝謝各位指教

  • How do i 'undo' changes in logic instruments?

    Can anyone help with this please? im using Ultrabeat and cant work out how to 'UNDO' changes - step back to where i was before i changed a setting etc. I'm new to Logic and could really do with a hand with this one. I dont want to have to save before

  • CPU limits in profile

    Hi all, 11.2.0.1 aix 6.1 We have a new app to be implemented in our existing PROD db. Since this is not so priority app we want to control/limit is CPU usage so not to affect the critical app (priority) that is currently running in our PROD dataabase