Is there any settings for non additive dissolve video transition? mine doesnt work!

is there any settings for non additive dissolve video transition? mine doesnt work!

Hi Edittor,
What kind of settings were you looking for?
Thanks,
Kevin

Similar Messages

Non additive dissolve video transition doesnt connect 2 photos gradually in my Premiere pro 5.5

non additive dissolve video transition doesnt connect 2 photos gradually in my Premiere pro 5.5, is there any settings for it?

I too am experiencing this issue. AVCHD footage, GPU Acceleration, trying to apply a cross dissolve, and instead it randomly seems to see it as a simple cut. The Cross Dissolve is simply ignored... Adjusting the footage length, removing the CDissolve, re-rendering, etc. have no effect. For whatever reason, in that specific location on the timeline, a cross dissolve with GPU acceleration is impossible. Yet, in other sections of the timeline, it is just fine.
(The Fast Blur trick mentioned above worked (Thank you!) however, when I changed my playback resolution on the screen display, that broke the fix. Deleting the fast blur, and applying it to the clip on the other side of the cross dissolve, re-enabled the work around)
I also see an issue when a clip changes in the timeline, (cut from one piece of footage, to another) the video will begin to studder, dropping frames. Framerate seems to drop to about 2fps. To get smooth playback back, I have to pause and resume the playback. Even if this is done very very rapidly, it still fixes the playback issue. it's just really annoying to have to constantly stop and resume playback everytime a video clip changes in the timeline.
I have a dedicated hard drive for video, and a dedicated mirrored array for the OS. the video drive is a 7200rpm SATAII drive, and I'm using AVCHD footage. I really don't think it's a disk speed issue... particularly as pausing and resuming (even if you do it as fast as you can possibly hit the keys) fixes it. I'd rather not spend the $ to set up a RAID 10 for video, if I can avoid it and particularly if it's not needed.
-Jason

Is there any settings for motorola bc4 bluetooth power saving on Presario CQ56?

I bought a Gigabyte Bloetooth mouse (M7700B) and it is work fine, but If I stop to move the mouse for a while (2-5s), than at the next movement the cursor wont start for a few seconds. Like the cursor stucks.
I have read an article, about this problem, and there was writen, this is because the bluetooth device power saving. In tis article was suggested, to turn off power saving on bluetotth device, but on the controll panel, thre is nothing to set.
If anybody has some information about this, tel me.
Thanks and sorry for my English
Sandor

It's an idea, Scott, but I haven't heard that anyone has implemented it.
There are a number of other options that various people have noted would be handy to have "on" when running on AC and "off" when running on battery, or vice versa. We can all think of some of them. Send feedback to Apple:
http://www.apple.com/feedback/macosx.html

Is there any driver for an HP Laserjet 5000 printer that will work with OS 10.10.2?

I have an older laserjet printer and since updating to OS 10.10.2 I cannot print. I have been on with HP, and they no longer support this printer, and the latest driver is compatible with OS 10.6. Does anyone know a way to get around this? I really cannot go out and buy another printer, this one is great.
Thanks

Mention you're using a Mac and HP will give up pretty easily. It doesn't matter whether the printer is new or old.
Since the driver you have been using no longer works, did you try OS X's generic PostScript printer driver?
I agree old HP printers are built well and last forever, and no one likes keeping perfectly good printers in service more than I do, but are you absolutely certain a new printer is out of the question? Faster and much more capable laser printers than the LaserJet 5000 are readily available today for less than $100. HP doesn't make them.
Even finding a replacement your toner cartridge for yours must be getting difficult. The street price for that toner cartridge is about $150. HP's list price is well over $200.

My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

I have not had any experience in getting any devices repaired so I'm not sure which store to resort to. An official Apple store should more than likely get you what you need, but I'm guessing it's probably more expensive. (if any cost for your situation)
I hope you get your problem resolved.
~Lt. Leviathan

Are there any fee for developing software for USB non NI harware?

We develop applications in LabView for pieces of hardware witch communicate via USB. Are there any fee for developing software for USB non NI harware?

If you really mean distributing software that you developed, then you and a lawyer might want to review the LabVIEW software license - especially the section on distribution requirements (in my 6.1 version it's section 12). You should also contact NI directly and ask them. This forum is primarily made up of LabVIEW end-users and any legal advice you get here is worth exactly what it costs, in other words, nothing.

I recently gave my old iPhone to my nephew, he switched it to his phone account, but somehow I now have his contacts on my new iPhone 5. When I look at my iCloud account, it lists his contacts. Is there any way for me to get my contacts back?

I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?

This is caused by using the same iCloud account on both phones. When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores).
Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source. You could try restoring to your last backup but this doesn't always work for contacts. (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.)

How to put restriction/variable in BI 7.0 ? Is there any settings required?

Hello,
I am working on BI 7. I want to know ""How to put restriction/variable in BI 7.0 ? Is there any settings required? I am putting some variables in BI 7.0 while making some query""
amit shetye.

Hi Amith,
just create a new query like a previous versions how u create.. and now select particular charecterstic in the left side window itself.. and drill down it.. and create a variable.. and assign all the properties to that variable.. now drag that particular variable.. in to the Rows or filters..
for Restrictions... put any charecterstics into Free charecterstics.. and right clcik that and select Restriction. now you need to give the values.. based on that it will RESTRICT THE VALUES..
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
http://help.sap.com/saphelp_nw04s/helpdata/en/43/F9D041D6392AE3E10000000A422035/frameset.htm
BI7.0
For greater information on reporting.....
Good Knowledge in BW Reporting
regards
@jay

My iCloud on my phone is undJer another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

My iCloud on my phone is under another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

You have to delete the iCloud account but you can keep all your data such as Contacts, Calendars etc. when you delete the account you will prompted to "Keep on my iPhone".
All your purchased content (like apps and music from iTunes Store) belongs to the original ID and you have to re-Purchase them under your Apple ID.
Photos in Camera Roll remains in Camera Roll.
Photos in photo stream that are not in Camera Roll must be saved in Camera Roll.
Photo that previously synced from iTunes remains in photo library until you synced with another iTunes library (another computer).
Also sign out from iMessages, FaceTime and Home sharing (Settings>Music)

Is there any settings in CO to stop the Sale Order or Invoice Document

The Invoice would not post to accounting when created as the material did not have a standard cost.
I created a cost, re-dated the invoiced and released it from VFX3.
When I looked at the PA entries I saw that the group cost entries to PA were okay but only the cost component (raw materials) of the legal cost had posted. The legal cost of goods sold was blank. Looking at the billing document I see that the VPRS condition is showing as an error with zero value. This explains why no PA entry for it was made.
Can anyone tell me why the condition wasn't corrected when the cost was created and why the invoice was released from VFX3 with an Condition error uncorrected.
Is there any settings in CO to stop the Sale Order ot Invoice when there is an error in sale order or invoice.
Thanks in advance

Hi
To stop the sale order in the absence of Std Cost - use exit MV45AFZB
To Stop the invoice - CReate a Costing key in KE40 and check "Issue error msg if no cost estimate found"...
Also, you can redetrmine your pricing during billing to update VPRS
Ajay M

Are there any fixes for iPad 2 with OS 8.1.1.

Are there any fixes for the iPad 2 IOS 8.1.1? I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response. These problems have been occurring since the last update. At times the iPad becomes unusable. I have been keeping all programs closed and history and web site data cleared. Thanks for any help you can give.

Hi, dannilee,
I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
To improve the performamce, I have tried these:
1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
Hope it is useful for you.

I have an I Pad 1 with 64 gigs. It constantly drops me off the Internet for no apparent reason. Is there any fix for this problem?

My I Pad 1 constantly drops me off the Internet and programs. Is there any fix for this problem? It started after the last update and continues to get worse.
Doug

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

I am having an iPad 4. I am not getting alerts while receiving any call in my ipad. Is there any solution for this?

I am having an iPad 4. I am not getting alerts while receiving any call in my ipad. Is there any solution for this?

Check your settings
Settings>Notifications>FaceTime/Message>Alert Style

Is there any support for green screen

I have a few questions
-is there any support for green screen?
-seems like none of the effects can be adjusted like in FCP 7?
-the audio editing is very limited compared to FCP7?
seems sooooo much is missing!
Do you think there is a chance apple will offer a refund?

Sorry to be annoying, but all of these things have been discussed in other threads here!

Using Airplay with AppleTV to share my MacBook Pro desktop is very unstable since upgrading to Yosemite, are there any settings I need to reconfigure?

I used to use desktop sharing from my Macbook Pro (Late 2011, Intel Core i5) to watch videos on my TV. Since upgrading to Yosemite the stream has been unwatchable. Both visual and audio latency problems are very common. As streaming from my iOS devices is fine, I'm pretty sure it's not my WiFi setup. Has anyone had similar problems? Are there any settings I need to change to improve Airplay from Yosemite?
Thanks in advance.

Hey MasterAir,
If you are having an issue with AirPlay performance, I would suggest that you troubleshoot using the steps in this article -
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Is there any settings for non additive dissolve video transition? mine doesnt work!

Similar Messages

Maybe you are looking for