Is there any software out there to reduce the noise on a quicktime movie ?

Hello,
I have a quicktime movie which i imported from my camcorder, and it is very grainy.
So like is there a application that can reduce it ?

Yes, you have lots of alternatives.
1. Got to somewhere like Google docs and create a comment and feedback form, that can be inserted onto your site via the html snippet. You can also take a look at http://www.jotform.com. Whenever someone completes the form, you will be e-mailed with all the info.
2. Use a comment system like http://www.intensedebate.com. Very good and the comments will be displayed on your site and you will be e-mailed when someone comments and you are able to accept it or reject it in this way.
3. Go and create a blog elsewhere, like http://wordpress.com or if you have hosting, then try http://wordpress.org. You can load this on your server with no problem and then create comments here, so in your iWeb site you either create a link to your blog or you can display your blog as an iframe in your iWeb site using iframe code.
4. As far as hit counters go - there are many. Just do a Google search for hit counters - http://www.hitcounterexpert.com and there are hundreds more.
Perhaps Apple keep blog comments and hit counter as MobileMe only to encourage people to use MobileMe rather than external servers. However, we can only speculate on that!

Similar Messages

Any software out there to update JDK1.0 source code to JDK1.3?

Hi,
I have some source code written in JDK1.0 and I'm currently trying to update it to JDK1.3 - there are a few classes which are deprecated, such as handleEvent and action.
Updating these classes looks like it might be a bit difficult (im not a Java pro!), does anyone know if theres any software out there which can do this for me?
Thanks!

OK. I apologize.
I don't think that such a tool exists, and I would probably not use one UNLESS I knew how to do it by hand myself.
In general, anywhere you have a handleEvent you replace with an EventListener of some kind...
I think the best way to learn a programming language is to engage in a project that is above you, and meet the challenge...
~David
(I hope this was slightly more helpful than my last reply)

I took a 6 minute video and it's too grainy. Is there any way at all to reduce the grain? Or am I out of luck?

I took a 6 minute video and it's too grainy. Is there any way at all to reduce the grain? Or am I out of luck?

Yes, you have lots of alternatives.
1. Got to somewhere like Google docs and create a comment and feedback form, that can be inserted onto your site via the html snippet. You can also take a look at http://www.jotform.com. Whenever someone completes the form, you will be e-mailed with all the info.
2. Use a comment system like http://www.intensedebate.com. Very good and the comments will be displayed on your site and you will be e-mailed when someone comments and you are able to accept it or reject it in this way.
3. Go and create a blog elsewhere, like http://wordpress.com or if you have hosting, then try http://wordpress.org. You can load this on your server with no problem and then create comments here, so in your iWeb site you either create a link to your blog or you can display your blog as an iframe in your iWeb site using iframe code.
4. As far as hit counters go - there are many. Just do a Google search for hit counters - http://www.hitcounterexpert.com and there are hundreds more.
Perhaps Apple keep blog comments and hit counter as MobileMe only to encourage people to use MobileMe rather than external servers. However, we can only speculate on that!

Since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I'd like to know how I can acquire a waveform on a loop and do a circular buffer with this waveforms I will acquire, cause I want to reduce the noise.

I'm using trigger for this data acquisition.

deco,
If you really want a circular buffer, how much data do you want it to hold? One acquisition? Two? Three? Once this is decided, you will need to create the waveform and then continuously strip the old data out and place the new data in. This will add a bit of overhead to your VI.
There are also software noise filters in LabVIEW that you can use to reduce the noise in your signal.
Lastly, if there is a lot of noise, you may want to consider an SCXI system which will filter out most of the noise as the data is being acquired.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

HP Z400 600W PSU, reduce the noise?

Hello, i bought the 600W psu a few months ago because i wanted to have a great graphic card.
But i think the noise from the computer is way to loud. Im verry sure its the PSU since the 475W version was verry quiet when i tried it.
Can i do anything to reduce the noise from this thing? Open it, replace the fan to a better one perhaps?
I know there are some people who have managed to get a ATX PSU into their HP z400 using a "HP Z400 PSU to standard atx adaptor" but i dont really know how to build a cable like that... Its probably easy but i have no knowledge about things like this.
https://plus.google.com/photos/111388964237560787781/albums/5362166283613539361
If anyone could buid this cable for me and i could buy it i would really appreciate it! Becuase then i could use whatever ATX PSU out there?

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional workstation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How to reduce the noise in PCIe-6321 acquisition, to optimize wiring.

Hi all,
I want to optimize my wiring in term of noise reduction. I use a DAQ PCIe-6321 in my application. I want to acquire an analog signal from a sensor (+/- 4 Volts, resolution of 2 mV, output impedance of 100 ohms) using the DAQ. The frequency of the signal is below 2 kHz. My first question is about the most suitable cable to use (shielded, twisted, etc.)? What is also the best suitable input configuration to choose in Labview (differential, RSE or NRSE)?
Moreover, after processing of this data under Labview, I want to power an audio power amplifier (input impedance equal to 10 kohms) using the analog output of the DAQ. What is the most suitable cable to use to reduce the noise? Are there any other tips to optimize the wiring?
Thank you for your help and suggestions!
Cedric

Hi guys,
I know that it is a bit late to reply but that is the perfect topic for what I am looking for!
I am currently working with acquisition systems using either PCI-6221 or PCIe-6321. Those systems are exactly the same but the results are different (see picture enclosed). We can see spikes and noise with the PCIe-6321 while we have the same conditions of measurements.
Here is the NI setup:
- PCI-6221 + connector block CB-68LP + cable SHC68-68-EPM
- PCIe-6321 + connector block SCB-68A + cable SHC68-68-EPM
In one of the system equipped with PCIe-6321, I replaced all the devices like cables, detectors, motors and it doesn’t change anything. I also swapped the computer for one equipped with PCI-6221 and it works fine. It means that the problem really comes from the acquisition card.
So my question is: why is there such a difference between those models? Do I need to change the configuration in the card?
Thanks in advance.
Maxime
Attachments:
Difference PCIe6321 and PCI6321.jpg ‏136 KB

When I put my iphone 4s into my pocket (pants or coat) and move it around, the phone beeps/makes a tone. I can't figure out what is causing the noise.

I have a strange problem. When I put my iphone 4S into my pocket (pants or coat) and move it around, the phone makes a beep noise/tone. I can't figure out what is causing the noise. It doesn't sound like any of my regular applications. Maybe it is the lock noise but I can't tell for sure. More movement makes more beeps. Even walking with my phone in my pocket creates beeps. The IOS is 7.0.4 (11B554a). Anyone else have this crazy problem?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

I wonder the Format Tables macros on my site could be adapted?
http://www.grainge.org/pages/authoring/word/word_macros.htm
If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can i reduce the noise on this video?

I have used Keylight to key some chromokey footage onto a white background.
However, I still have a lot of noise on the video, by this I mean fuzzyness, instead of good rich colors - you can see for yourself if you download a sample of the file which I have linked to here:
http://www.youtube.com/watch?v=-MmBGI-JUMk
Obviously the actual file has proper dimensions unlike the YouTube example! This example also doesn't show the noise quite as well as the actual Flash file, it's a little more intense than it looks here.
How can I make the video fuller in color, to reduce the noise....?
Thanks.

The noise looks like genuine camera noise from poor lighting with ramped up sensor sensitivity. Therefore, as a start, I'd run the clip through a pre-comp and use the Remove Grain effect or tools like RevisionFX' DE:Noise, Red Giant's Key Correct Pro and so on. If it's DV/ HDV or similar, some de-blocking by ways of similar tools is also recommended. This should already improve matters notably. Then, as Sébastien said, study the super tight junk matte tutorial and apply the technique to your footage. The less pixels to key, the more efficiently the keyer can expand its range on the remaining ones. If you then still experience jaggy/ noisy edges a second application of the aforementioend plug-ins might do the trick. Other options include tools like Twixtor, SmoothKit, RSMB, RE:Fill etc. to mend holes and smear gaps. also, since the person is wearing dar clothes, the old trick of using a dark Inner Glow might also be applicable.
Mylenium

Can i reduce the noise that my motherboard's fan create?

i have the "msi k8 neo4-f nf f4 s+l+r
when my pc had a service three months ago i had told the technicians to reduce this noise they told me that they would fix it but they didn't.
when i had called them they told me that my motheroard's fan has lost it's smoothing...
i'm about to go mad
I can't stand it anymore...(this tiny fan spins around my head)

hello,
you can have a look here:
https://forum-en.msi.com/index.php?topic=98720.0

Is there any software for iTunes that allows the user to adjust tint, color and hue?

I would like to view my videos with the ability to fine tune color (hue, tint and color) for playback, Any one know a easy quick fix?

Thank You Keith for responding. I am asware of the options in the drop down list in iTunes "Show in Finder" to use OT and its options to adjust tint, color, contrast etc, etc., I was more interested if the same thing can be can done in iTunes it's self? Do you know of a plugin or a simple script that might help me? ( I do not know apple script very well but if it is well written i can fallow instructions pretty good.)

All of a sudden the screen on my iMac 10,1 is too small for the image. Can't figure out how to reduce the size of the Finder or any of the Apps.

All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?

You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred

DVI out to TV reduces the viewing area on the TV

I have a Panasonic 42" HD TV which I am planning on hooking up to a mac mini. However, I have tried hooking up my MBP to the tv through a DVI-HDMI cable. Whenever I do that the picture viewing area on the TV is reduced from what it normally is for regular TV watching.
I have tried using it in both mirrored and non-mirrored viewing modes.
The TV can handle 480i/p, 720p, and 1080i/p but converts that signal to 720p to display.
The Panasonic display settings have a button called "Overscan" but that actually cut off some of the edges of the display area (ie the menu bar and dock. I've attached an image of the Display prefs pane
http://web.mac.com/brownaa/display_setting.tiff

Wow, and those are the very settings which should fix the problem. Maybe there is onscreen menu settings from your remote control for Overscan which can be set. I don't even have the System Preferences Options section on my HD-TV. If not, maybe this just is a case of one TV that has no real ability to override overscan.

How do I reduce the file size of a movie which is consecutive pictures?

I have added audio to a powerpoint presentation and imported it into final cut pro. I want the smallest file possible, whilst retaining quality. The "movie" part is 30 consecutive pictures, so can I significantly compress the video in the file before exporting it to final cut pro?

The final video will be put on my website.
In terms of the format, it will be downloaded and watched rather than streamed. I do not know a great deal about different video formats, but basically it needs to be in a format that most of my colleagues can watch (who are not hugely IT literate).
The file as a powerpoint presentation alone is 2.5MB, but with audio it is around 25MB (compressed in powerpoint from 250MB). The only problem is that I want to edited the audio, so I am exporting it from powerpoint into logic 8 to change the audio, then I am importing it into final cut X for video editing. The talk is around 80-90 minutes long, and I need to keep the quality of the pictures as they include x-rays (which need to remain high resolution). I cannot therefore see how I can have a video of this length and keep the quality. 960 x 720 would be ideal. The fact that the powerpoint presentation when compressed is only 25MB with high quality pictures and audio makes me think that there must be a way of doing the same in a video with a very low frame-rate for each individual slide (though each slide is of a different length from one another.) There also may be an entirely different way of doing this, and I am welcome to receive suggestions!
Thanks

Is there any software out there to reduce the noise on a quicktime movie ?

Similar Messages

Maybe you are looking for