Is there any software to help me remain login to yahoomail all the time

Hello friends ,
I just need a software that will help me remain login to the yahoomail , like yahoo messenger , we can close the yahoo messenger window after logging in. Similarly is there any similar software which will help us to remain logged in the yahoomail even if we have closed the yahoo window.
bye n take care.

While there is no library to do this exactly, these kinds of things can be done with CoreAnimation. Read up on the layer geometry and transforms.

Similar Messages

Our Power Mac G4 doesn't start up anymore since our iMac G5 is connected. Is there anyone who can help us? I've tried all the different methods and combinations, but so far without result, or: a bleu screen as a result.

Hallo,
Nieuw op dit forum toch gelijk al een brandende vraag: wij hebben na jarenlang 2 Power Macs G4 gedeeld te hebben nu een iMac G5 aangeschaft die we dus samen met de G4 willen delen. Nu krijgen we alleen de oude Mac niet meer opgestart. Verscheidene toetscombinaties geprobeerd maar niets werkt. Afwisselend krijgen we een blauw scherm met pijlen of een grijs scherm met een map met vraagteken. Iemand een idee wat we kunnen doen? Apple zelf ondersteunt niet meer apparatuur van 7 jaar en/of ouder. Mogelijk ligt het ook aan het netwerk of heb ik iets niet goed aangesloten. De iMac G5 draait ook onder 10.4.11.
Elke hulp is welkom!
Groeten en dank alvast.

Dutch to English translation
Hello,
New to this forum as it has a burning question: after years we have 2 PowerMac G4 divide have now bought an iMac G5 so we want to share with the G4. Now we get only the old Mac does not boot. Several combinations tried but nothing works. Alternately, we get a bluescreen with arrows or a gray screen with a folder with question mark. Any ideas what we can do? Apple itself does not support more equipment from 7 years and / or older. It is also possible to the network or something, I have not connected. The iMac G5 also running 10.4.11.
Any help is welcome!
Regards and thanks already.
Try holding the Option/alt key down at bootup, does the Startup Manager show any Drives to boot from?
English to Dutch translation
Probeer het houden van de Option / Alt toets ingedrukt te houden bij het opstarten, is de Startup Manager toont alle schijven op te starten vanaf?
Can you boot from your Install CD/DVD by holding the c key down?
English to Dutch translation
Kunt je opstart van je installatie CD / DVD en houd de c toets ingedrukt te houden?

I have Firefox version 3.6.8. and its constantly crashing unexpected, not related to any specific sites or anything..and it happens all the time. Please help me as I am desperate about this and cant find a solution :/

Well there are no specific details, its just the fact that it happens really a lot, sometimes few times in a row..

Intermittent problems are difficult to diagnose. Post back with your crash Report IDs (watch the video and paste only the Report IDs in your response): https://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_help_with_your_crash
Also see: 
*http://support.mozilla.com/en-US/kb/Firefox+crashes
*http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
*http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
*http://support.mozilla.com/en-US/kb/Firefox+will+not+start
*http://kb.mozillazine.org/Firefox_crashes
*http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
*http://support.mozilla.com/en-US/kb/Safe+Mode
 
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Shockwave Flash 10.0 r32
* Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

HT4491 My wife did a restore on our computer that made me lose my acct information. is there any way to restore it so i can access all the info i had?

my wife did a restore on our computer that lost my acct info i need to figure out how to access my info or restore my acct. not sure

Sorry, but I still don't understand what "account" you're referring to or what you're trying to recover. If you mean the iTunes Store, your husband should be able to just sign in using his normal user ID and password for the Store. If you mean the content purchased from the iTunes Store, with the exception of movies and audiobooks he should be able to just download it again:
http://support.apple.com/kb/ht2519
If that's still not what you mean, you'll need to clarify further, or have your husband post and explain what the problem is.
Regards.
By the way, there is a forum for iTunes for Windows:
https://discussions.apple.com/community/itunes/itunes_for_windows
It's usually most effective if you post in the correct forum. Otherwise people can easily become confused, particularly when your explanation of the problem is, shall we say, less than complete.

Is there a way to lock several tabs that you need all the time so that they are always available?

I use the same 6 or 7 web pages everyday at work and I'm wondering if there is a way to keep those tabs open by default? It would be especially nice if they stayed in the same order. My work flow includes using LinkedIN, Basecamp, Zoominfo, SalesForce, Facebook, etc. and I need to always have them open and easy to find.
I think that as we move more to browser-based software solutions, being able to keep pages open, properly labeled and easy to find is crucial for streamlining work flow.
By proper lables i mean: when using brower-based software, the name of the software should be shown in the tab instead of what part of that software you are using.
Thanks for your help.

Hi ,
If you use the “Add Bookmark for These Tabs” option under the Bookmarks menu, it will create a single bookmark link that will automatically open all of those pages in seperate tabs when selected. You may find the following article helpful (it's aimed at Mountain Lion, but the same option should be available in Mavericks):
Safari 6 (OS X Mountain Lion): Keep bookmarks in the bookmarks bar
http://support.apple.com/kb/PH11853
Regards,
- Brenden

I can not open any folder in my MacBook Pro, It asks me all the time "Restore windows? "

How to open folders and programs ?
nothing is working.

Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
Shockwave Flash
WebKit built-in PDF

There was an error loading this content...happens all the time

at least three times I day I have to unplug and plug in the power as it gives me the "there was an error loading this content" message constantly...why does this happen? This is a very frustrating device

That will usually indicate a network issue.
What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet
You can go to istumbler, netstumbler or similar to see a report of the network, look for signal strength and noise

Anyone that kan help me with my wifi dissconnet all the time ?

I need help, 5-10 times a day my wifi disconnects ...
I do not know what i can do to make it not disconnet.
Thanxs for the help...

Which model do you have?

Macbook battery life, is there a problem If I keep it plugged almost all the time?

Hello.
New Mac user here, so I was wondering if there's a problem if I keep my MBP plugged all the time.
Most of the time I'm on my room using my MBP fully charged and I don't disconnect it.
Is there a problem with my batter life if I do that?
Or it's recommended to unplug and use it till the battery run off and then charge it again?
Because I work a lot on my MBP and that way in a simple day I could charge it and run uff the energy of the battery 2 to 3 times at day.
What's better for the life of my battery?
And if you could give me some advices to maintenance my battery and Macbook pro (also programs) I would appreciate it.
I own a Macbook Pro 13-inch, Mid 2012
2.9 GHz Intel Core i7
8 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB
With OS X 10.9
Thanks

Tamarizz wrote:
New Mac user here, so I was wondering if there's a problem if I keep my MBP plugged all the time.
No. I do that most of the time. Perhaps monthly I discharge it to the 40% level to keep the battery happy. Do not discharge the battery completely. If you are forced to use only battery power and you see the battery is low warning terminate your session or plug into AC if you can.
Here are Apple articles with official battery usage guidelines:
http://www.apple.com/support/macbookpro/batteries_power/
Ciao.

Is there any software of korean language pack for ...

Is there any software or upgrade for my 6120c to support korean language that I can download? Because I have a lot of korean song which are written in korean (hangul) and it only appears as some squares, so it s a rather difficult to recognize each song which is all of them of course appears as squares and squares, so...please, help me...is there any solution for this problem?...

Answered here ...

I had a software (something 6) come up on my iphone so i pressed yes, since then after restarting on its own it keeps saying no sim ! even though my o2 sim has been there all the time?? ive complety restored my iphone still doing the same, help!!!!???

i had a software (something 6) come up on my iphone so i pressed yes, since then after restarting on its own it keeps saying no sim ! even though my o2 sim has been there all the time?? ive complety restored my iphone still doing the same, help!!!!???

Dude or hot-spur,
Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
Thank you again

I have an iphone 3gs in which sleep/wake button not working. i have got stuckn in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone??

i have an iphone 3gs in which sleep/wake button not working. i have got stuckn in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone?? Please help...and thaks in advance

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Is there any software to wash out everything and reset iphone 4s as a new device ?

Is there any software to wash out everything and reset iphone 4s as a new device ?

Okay, so what you are describing here is the activation lock and restoring the phone via iTunes as a new device will not help you at all.
The activation lock requires that you know the Apple id and you need to get the Apple id for the device that you have purchased from the website that you bought it from.
If you cannot get the Apple id for the phone then you will never be able to use it and you have wasted your money on it, so you either need to get the correct Apple id for the phone or return the phone for a full refund and start again, but this time buy the phone from a legitimate source.
If you cannot get the Apple id for the phone there is no way around it and you will never be able to use this phone.

Is it possible to connect to a Power Macintosh 8100/100 running v7.5.5 from a current PC via AppleTalk? If not is there any software that will allow me to?

The question says it all. We are trying to add an old Power Macintosh 8100/100 v7.5.5 to our network. We tried using PC-MACLAN but it requires OS X. Is there any way to get around this or is there any software available add this to our network? Any help is greatly appreciated.

Hi,
If you wish to merely transfer files, one idea could be to have one ftp or web server on each machine, and then use appropriate clients (ftp programs or web browsers).
TCP/IP software is available under System 7.5.5. The 8100/100 can use standard RJ-45 Ethernet cabling via a suitable adapter for AAUI-15 (such as the Apple Ethernet Twisted-Pair Transceiver M0437).
For the Mac, the now free program NetPresenz could perhaps be of interest as a server solution.
Jan

Is there any software in Adobe Creative Cloud which will let me generate barcodes?

Hi
Is there any software in Adobe Creative Cloud which will let me generate barcodes?

- Do I have 40 10-second clips each with 1.9 GB of unwanted video behind it??
Not to worry. When we Copy and Paste within a project, iMovie HD creates a new clip thumbnail for the Timeline/Clips pane, then simply adds a new pointer to the source video. The source material is not duplicated.
When you Copy a clip and Paste a clip to a DIFFERENT project then Yes, the clip's entire source video file is duplicated. (When Copying between projects, be sure to Copy and Paste all the clips together so iMovie duplicates the source files just one time.)
Next time, you might consider setting your iMovie 6 preferences to limit the length of imported clips to 3 minutes — or whatever duration you want. Then each imported clip will have its own source file. When you discard an entire clip its file will be discarded too, shrinking the size of the project.
If you have no need to preserve the clips as clips you could export the project to a Full Quality movie that you import to a new project. Everything will arrive as a single clip, which may be okay here. Then discard your old project. The project will be smaller, containing just the stuff on the Timeline.
If the Timeline contains most of the source material — just split into small clips — there may not be a lot of "extra" material in the project. To get an estimate of how large the Timeline really is, open the "Timeline Movie.mov" that's inside the Cache folder of the project in QuickTime Player. QT Player's Show Movie Info window will show the size of the material it represents.
Karl

Is there any software to help me remain login to yahoomail all the time

Similar Messages

Maybe you are looking for