Is there Any Standard Function Module that populates mail in SAP inbox

Hello Experts,
The scenario that we are working is , Email Integration in SOLMAN.That is the done using XI , first the mails raised for Support Desk issues from Outlook are read and collected in XI ,now the requirement is from XI we have to populate the mails into SOLMAN's Inbox. So is there any standard FM that can be used in XI for this purpose.
Or is there any other way in which the mails can come into Solman's Inbox,If someone has worked on this , please give me your valuable suggestions ASAP.
Thanks & Regards,
Mohana

Hi deepak,
1. we can use the FM
DATE_CHECK_PLAUSIBILITY
regards,
amit m.

Similar Messages

Any standard function module to read data from a cube

Hi,
I want to read data from a cube say XYZ, into an internal table. Is there any standard function module to do this? If so can anyone plz tell me what change should i make in the function module for my requirement.
Regards
BW Fresher.

Hi R,
Try function module 'RSDRI_INFOPROV_READ'
ABAP Report RSDRI_INFOPROV_READ_DEMO contains an example of how the function module can be used.
Udo

Is there any RFC function module to read domain fixed value

Hi,
Is there any RFC function module to read domain fixed value from remote system in basis layer?
As we cannot simply wrap DD_DOMVALUES_GET with a new RFC module,because remote system will not install our component, our wrap function module is not there.
We may need a RFC fm from basis layer.

HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi

Is there any standard function available for generation of RIN number.

Hi experts,
RIN is Renewable Identifiaction Number.
Structure for a RIN is a 34-character numeric code in the format:
YYYYCCCCFFFFFBBBBBRRDKSSSSSSEEEEEE
YYYY = Year of Batch Production (when it leaves the facility)
CCCC = Company registration ID
FFFFF = Facility registration ID
BBBBB = Producer assigned Batch Number
RR = Equivalence Value for the renewable fuel
D = Renewable Type Flag (1 - cellulosic; 2 - non-cellulosic)
K = RIN Type Flag (1 - standard, 2 - extra-value)
SSSSSS = RIN Block Starting Gallon Number
EEEEEE = RIN Block Ending Gallon Number
Is there any standard function avaiable in R3 to generate such number?
Please reply asap.
Thank you in advance.

Hi deepak,
1. we can use the FM
DATE_CHECK_PLAUSIBILITY
regards,
amit m.

Function module to send mail from SAP

Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.

Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m.

Can we hide or delete the standard BO link that shows up in SAP Inbox & UWL

Hi,
Is there a way to hide or delete the standard BO link that shows up in SAP Inbox & UWL ?
I have already gone through the following threads.
Objects and attachments in workitems..
No standard object's link in the workitem
But, i have this requirement to hide atleast on UWL side the link for the std. BO.
I am working with ECC 6.0 & E.P 7.0 , SP 10.
Jocelyn,
You were mentioning about some UWL XML configuration to hide this in the first thread. Can you elaborate on this please.
Anybody,
Any idea on how to achieve this ?
I really appreciate your immediate reply.
Regards,
venu

Guys,
Luckily, for this, i was using a user-decision step which uses DECISION --> PROCESS method. So, I could remove the BO:TRIP that i included earlier. But, for other tasks, where if we use a method from our BO, we cannot remove this std. BO link that shows up in "Objects & Attachments"...to my understanding.
Thanks for all your info on this question.
venu

Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

hello
are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

Any Standard Functional Module to create 1008 Infotype its Account Assign.

Hi
can any body pls help me to know any standard FM to create 1008 Account Assignment ?
dont want to go for BDC for this....
Points will be there for right answers for sure.
Regards
Meeta Nair

Hi
Txs for your response but, am looking a Standard FM which will ask for position id and then create its account assign infotype 1008.
pls help on this points will be there for sure.
Regards
Meeta

Is there any batch function module for '/SAPAPO/MSNP_GET_DRPIO_READ' in APO

Hi,
Iam developing a report for APO, wherein I pass matid & locid to the function module '/SAPAPO/MSNP_GET_DRPIO_READ' and get the order details as the o/p from the function module, now these takes place in a loop..endloop for more than 60,000 records which takes much of the processing time, can this be avoided by passing full table of matid,locid to the function module or rather a batch FM for the above mentioned function module.
Thanks & Regards,
Sanjay

HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi

Is there any bapi/Function module to change only header text in fb02

Hi ,
I want to change only header text in FB02 .the header text will come from a internal table.My Requirement is
1. open a document in FB02
2.change the header text of the document.
Right now i'm doing this through an BDC.but i'm looking for a BAPI /FM.
I Tried bapi_acc_gl_posting_post, fI_document_change..
is there any BAPI/FM for this???
Thanks,
Challa

You can use SAVE_TEXT FM
Thanks
Seshu

Reg: Function Module thats used to check the status of JOBS and mail it

Hi Experts,
Is there any Standard Function module thats going to find the status of the jobs and mail this status to specied email ID in .xls format. While checking status function module should give whether job is - Aborted, Successful, Running, Waiting, Locked, Error, Warning, Starting Date, Ending Date of the Job.
Please help me,

Hello Nagaraj,
You can find out the status of a job with the SHOW_JOBSTATE function module. You provide this function module with a job name and job number. It returns one of the six possible statuses of the job:
ABORTED TYPE C,
FINISHED TYPE C,
PRELIMINARY TYPE C,
READY TYPE C,
RUNNING TYPE C,
SCHEDULED TYPE C.
Following is the link for the same:
http://help.sap.com/saphelp_sm32/helpdata/en/fa/096e10543b11d1898e0000e8322d00/content.htm
Warm Regards,
Riki Dash

Is there standard function module to read "open office" in SAP

Hi All,
Is there any standard function module to read open office document from SAP.
Please confirm.
Thanks and best regards
Rajeev Chhabra

Hi all!
I have a similar problem. I need create a formatted spread sheet managed open office. The work sheet must be formatted.
I do not find the function module for doing this.
Do yo have any idea? The only thing I have found is the functionallity included in program BCALV_TEST_GRID.
Also I will need a function to upload the file to fill a table control.
Thanks in advance.
Cristina.

BDC program or standard function module to change data in PFCG TCode.

Gurus,
I have programatically change the validity date of SAP security role (TCode PFCG). Are there any standard function module available for this ? If not then does PFCG supports update vida BDC programming ?
Regards,
Rajesh.

Cross-posting. Thread locked.
Please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
PS: Please clean up / follow up on all your hundreds of unresolved questions.

Standard Function Module for OB52

Hi,
Is there any standard function module or BAPI for OB52 transaction.
PLease let me know.
Regards,
Raghu

Hi,
OB52 is basically a transaction variant of SM30 for maintaining the view V_T001B.
So there will not be any BAPI available to maintain the same.
Regards,
Ankur Parab

Function module for convert date as sap internal format ?

Hi All,
Is there any standard function module to convert the date filed as SAP internal date?
My problem is while uploading data from excel sheet date filed can be any format
for exp: dd/mm/yyyy or mm/dd/yyyy or yyyy/dd/mm or dd-mm-yyyy,mm-dd-yyyy
             dd-mm-yyyy or dd.mm.yyyy or mm.dd.yyyy etc...
In our case there is no particular format in excel it can be differ for each user. I know we have few FM's in standard.
But those are not working for my req. pls help me if you have any idea.
Thanks in advance.
Regards,
Venkat Mote.

Hi Venkatesh,
Can you please check with the following function module. For my case, it is working fine.
CALL FUNCTION 'CONVERT_DATE_TO_INTERN_FORMAT'
EXPORTING
    datum = p_gs_date
    dtype = 'DATS'
IMPORTING
    idate = p_gs_date
Hope it helps to you.
Regards
Rajkumar Narasimman

Is there Any Standard Function Module that populates mail in SAP inbox

Similar Messages

Maybe you are looking for