Is there any standard ODS for Contract (value type and quantity type)?

We know that in MM, contract records can be categorized into two different categories, Value type and Quantiy type.  We are trying to see if there is any Contract ODS in business content that we can install which can take care of these two types of contract records that we can bring them over to BW from R3?
Thanks

Hi Kevin,
Please see this link,ODS looks related to your requirement.But seems its for CRM and not for MM.
http://help.sap.com/saphelp_nw04/helpdata/en/38/c3813ed9d23e44e10000000a114084/frameset.htm
cheers,
Vishvesh

Similar Messages

  • Is there any  standard report  for GR / IR to see as on particular date

    Hi ,
    Is there any standard report for GR/ IR  to see as on paricular date.
    please help me. points will be given.
    regards,
    Hari priya

    Hi,
    Please go to MR11.
    It may help you.
    Regards,
    Jigar

  • Is ther any standard report for GR/IR Maintenance Main Tool

    is ther any standard report for GR/IR Maintenance Main Tool ?

    Hi Salsa,
    Use Tcode MB5S --> List of GR/IR Balance.
    Assign pts, if found useful
    Regargds
    Sandeep Acharya

  • Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

    hello
    are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

    You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

  • Is there any standard report for employee Personal information.

    hi
    is there any standard report for employee Personal information regarding
    Persoanal No.
    Name of employee.
    Designation.
    Department.
    Joining Date.
    Birthdate.
    Basic Salary.
    DA.
    HRA.
    Thanks

    Hi,
    Refer to
    Tcode S_AHR_61016369 - Employee List
    And for payroll result refer to Function module "HRCM_PAYROLL_RESULTS_GET"
    Hope that helps.
    Regards
    Mr Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • Standard smartform for application V5-Groups. and Output type LL00.

    Hi,
    I want the name of standard smartform for application V5-Groups. and Output type LL00.
    I need to print Ship to party address of Multiple Deliveries.
    Can anyone tell me the standard form name and Print program name.
    Regards,
    Rajender

    Hi Lavanya,
    SD_LOADING_LIST is a script.
    Can you please provide me with a standard smartform as we need to develop this in smartform only.
    Thanks,
    Rajender.

  • Is there any standard report for capacity of machines used /ideal

    Hi,,
    i am interested in knowing any standard report which tells us how long is my machine ( work center) ideal and how many hours i have used during a period of  say one month.
       how can we use capacity planning and work scheduling in repetitive manufacturing . pls tell me a the procedure to be followed.
    thanks in advance
    regards
    madan mohan

    Hi,
      thanks for your reply . but i am not able to get a report on  total capacity available in  the  last month and capacity i have utilized  for that month . so that i can derive my  work center ideal time during that past month.this gives  the time i have kept  the machine ideal . Is there any standard report meeting this requirement.
    pls give me  some solution
    regards
    madan

  • Are there any standard iview for FAQ??

    Dear Sir,
    Our server is EP6 SP14, I need to do FAQ
    Are there any standard KM iview for FAQ??
    Please advise.
    Thank you and best regards,
    Vimol

    Hi Vimol,
    You don't have any iview specificaly design for FAQs, but you have a FAQ sample in the XML Forms. It's based on KM, XML and XSLT and acts as a web content manager.
    To learn how to use XML forms go to the <a href="http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000073623">How To guides page</a>, under the KM folder.
    cheers,
    Marcelo

  • Is there any standard BAPI available to vendor , customer and G/L ?

    Hi all,
    any standard BAPI available to vendor , customer and G/L? I found BAPI_CUSTOMER_CREATE and BAPI_VENDOR_CREATE but when i traying to execute , then control directly taking to XD01 and XK01 initial screen's .i need to create vendor and customer master data using BAPI(data will come from legacy system).
    Other than these , is there any standard  BAPI available .Pl tell me
    Regard's,
    Pratap.

    Hello Pratap
    For customer the following BAPI is available:
    BAPI_CUSTOMER_CREATEFROMDATA1
    "This fm uses a reference customer as template for the new customer.
    " Using this BAPI you cannot create a new customer from scratch
    Regards
      Uwe

  • Cube for Inventory values, prices and quantity

    Hi,
    Does anybody knows some standard InfoCube that delivers Inventory values, prices and quantity?
    I need something like R/3 transaction CKM3 (Material Prices Analysis CO-ML). This transaction agregates inventory quantity, value ( material price) per material/plant, you could drill-down to material moviments level.
    I found a InfoCube named 0IC_C03 (Material Movements - see help link), but  i can't figure out how this cube works.
    http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    Regards,
    Eduardo

    Hi Eduardo,
    Now, I am developing a new query, exactly in CKM3 format, but where you can see more than one material at once.
    I am using the infocube 0COPC_C07 (Actual Costing/Material Ledger), where I can see the same information as in CKM3 transaction.
    I hope this helps,
    Regards,
    Fernando.

  • Is there any standard extractor for AFD provided by SAP?

    Hi.
    We are planning to implement SEM-BCS ? From this forum and  SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't  find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
    I think I missed good integration point SAP provided.
    Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
    Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

    The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
    So, there is no standard extractors for AFD.
    IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
    IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
    CoI - the most of data for it is accessible in ECC, even in RFD.
    So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

  • Is there any standard program for vendor's ageing

    Hi friends,
                There is a standard program for customers ageing(s_alr_87012178).Now i have a requirement for vendors ageing......Is it possible ?
    helpful answer is rewarded.
    Thanks & Regards,
    Anand kumar.

    Hi,
    Check in the following,
    All Standard Reports which are available are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
    2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
    3. Sales organization -> Sales organization / Sales office / Sales employee
    4. Shipping point -> Deliveries / Returns
    5. SD documents -> Orders / Deliveries / Billing documents ...
    & so on.
    <b>Reward if helpful.</b>

  • When I make iMovies and copy to disc, they record fine for my computer but I can't get them to play on my DVD for televison.  Is there a standard format for most DVD's and if so what is it.

    When I make iMovies and copy to DVD, they record fine for playing back on my computer but will not play on my DVD for television.  Is there a certain format for DVD player and if so can you tell me what it is?

    You need this:   http://www.apple.com/findouthow/movies/idvd.html#custom
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • How to stop Anti relaying in ims5.0. is there any standard procedure for this.

     

    Hi
    To allow outside users to connect to the server and send mail to any address, without granting the same privilege to the rest of the world, activate the authenticated SMTP portion of the filter via the useauthinfo option. Setting this parameter to "1" (i.e., useauthinfo:1 ) will require a user who is not in a submission address and who is attempting to send email to an address not in the delivery range to authenticate with a user ID and password.
    For additional information on the anti-relay filter, please refer to the Messaging Server 4.1 Administrator's Guide at
    http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677

  • Are there any standard BAPIs available to load Vendor and Park invoices?

    Hi Gurus,
    do we have standard BAPI;s available to load "Vendor" master data and to "Park Vendor Invoices"? Please advise,
    1) I wanted to load vendors from the flat file, with input fields and it is a mass update.?
    2) I wanted to park the documents around 100 or so at one time, not posting?
    Any suggesttions on the Bapis available?
    Thanks
    Surya

    Ravi,
    Thanks for your suggestions. But BAPI_VENDOR_CREATE doesnt have any input fields, am not sure how it is used???  And also, I am sepcifically looking for BAPI;s LSMW will do but looking for more of a web service kind of service with BAPI. I am looking for a service which reads fields from input file and store in LFA1 table.
    Also regarding the second BAPI, i read in some threads that we need PO number to park it, but my invoices have only reference from the old system, not PO number, does this matter??
    Thanks
    Surya

Maybe you are looking for