Is there any standard program for vendor's ageing

Hi friends,
            There is a standard program for customers ageing(s_alr_87012178).Now i have a requirement for vendors ageing......Is it possible ?
helpful answer is rewarded.
Thanks & Regards,
Anand kumar.

Hi,
Check in the following,
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
<b>Reward if helpful.</b>

Similar Messages

  • Hi Is there any standard program?

    Hi All,
    This is my question to the forum? Is there any standard program to create a report for AP manager to manage workpools? Please help me..
    Vicky

    Hi,
    The requirement is to create a report with a transaction for AP manager to view all the expense reports assigned or to be assigned. Once he see the list he must be able to assign the expense reports to different processors in the workpool.
    Thanks
    Vickie

  • Is there any  standard report  for GR / IR to see as on particular date

    Hi ,
    Is there any standard report for GR/ IR  to see as on paricular date.
    please help me. points will be given.
    regards,
    Hari priya

    Hi,
    Please go to MR11.
    It may help you.
    Regards,
    Jigar

  • Is ther any standard report for GR/IR Maintenance Main Tool

    is ther any standard report for GR/IR Maintenance Main Tool ?

    Hi Salsa,
    Use Tcode MB5S --> List of GR/IR Balance.
    Assign pts, if found useful
    Regargds
    Sandeep Acharya

  • Is there any standard program or FM to configure mail from SAP?

    Hi Experts,
    Is there any standard program or FM to configure mail from SAP?
    Regards
    Ramesh V

    Hi Ramesh,
    PFB.
    You can use function SO_NEW_DOCUMENT_SEND_API1
    Have a look at URL-> http://sapr3.tripod.com/abap011.htm
    Check the below forum:
    http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
    Regards,
    Faisal.

  • Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

    hello
    are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

    You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

  • Is there any standard report for employee Personal information.

    hi
    is there any standard report for employee Personal information regarding
    Persoanal No.
    Name of employee.
    Designation.
    Department.
    Joining Date.
    Birthdate.
    Basic Salary.
    DA.
    HRA.
    Thanks

    Hi,
    Refer to
    Tcode S_AHR_61016369 - Employee List
    And for payroll result refer to Function module "HRCM_PAYROLL_RESULTS_GET"
    Hope that helps.
    Regards
    Mr Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • Is there any standard report for capacity of machines used /ideal

    Hi,,
    i am interested in knowing any standard report which tells us how long is my machine ( work center) ideal and how many hours i have used during a period of  say one month.
       how can we use capacity planning and work scheduling in repetitive manufacturing . pls tell me a the procedure to be followed.
    thanks in advance
    regards
    madan mohan

    Hi,
      thanks for your reply . but i am not able to get a report on  total capacity available in  the  last month and capacity i have utilized  for that month . so that i can derive my  work center ideal time during that past month.this gives  the time i have kept  the machine ideal . Is there any standard report meeting this requirement.
    pls give me  some solution
    regards
    madan

  • Are there any standard iview for FAQ??

    Dear Sir,
    Our server is EP6 SP14, I need to do FAQ
    Are there any standard KM iview for FAQ??
    Please advise.
    Thank you and best regards,
    Vimol

    Hi Vimol,
    You don't have any iview specificaly design for FAQs, but you have a FAQ sample in the XML Forms. It's based on KM, XML and XSLT and acts as a web content manager.
    To learn how to use XML forms go to the <a href="http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000073623">How To guides page</a>, under the KM folder.
    cheers,
    Marcelo

  • Is there any recycling program for mac book batteries?

    Is there a recycling program for the mac book batteries??

    I believe that Apple will take them for you, but there are a number of other places that will recycle batteries no matter the source.  Staples, for example...  I just recently took them a box of 4 laptop computers, with batteries, one of them a smashed-up MacBook Pro (), and it was very easy.  They recycle not just the batteries but the whole computer too.  Call around to local office supply businesses and see who will take them.

  • Is there any standard extractor for AFD provided by SAP?

    Hi.
    We are planning to implement SEM-BCS ? From this forum and  SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't  find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
    I think I missed good integration point SAP provided.
    Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
    Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

    The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
    So, there is no standard extractors for AFD.
    IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
    IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
    CoI - the most of data for it is accessible in ECC, even in RFD.
    So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

  • Is there any purging programs for WF tables?

    I'm looking for purging programs to purge the WorkFlow tables,
    Is there any of those available?

    Hi,
    Yes, there is. Concurrent "Purge Obsolete Workflow Runtime Data" under System Administrator.
    Regards,
    Ketter Ohnes

  • Is there any purging programs for shipping (WSH)?

    We are looking for purging programs for the shipping and distribution areas.
    Is there any of them available?

    Hi,
    Yes, there is. Concurrent "Purge Obsolete Workflow Runtime Data" under System Administrator.
    Regards,
    Ketter Ohnes

  • Are there any safe programs for cleaning your Mac?

    Are there any safe (and free) programs for cleaning your Mac?

    Mac OS X: Starting up in Safe Mode - http://support.apple.com/kb/HT1455
    What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
    Safe Boot takes longer than normal startup - http://support.apple.com/kb/TS1884

  • Is there any alternative program for RSSTAT10 in ECC6.0 system

    Dear ABAPers,
    Issue scenario:
    We are trying to create a report program in the ECC system to provide the details of the server workload. This report is a copy of the program RSSTAT10 which is working fine in other systems(3.1,4.7). The report works fine in those systems. But when we try to copy the same on ECC,we get a dump " CALL_FUNCTION_CONFLICT_TYPE ".
    The Reason for the dump :
    1.The reason is the mismatch of the field length in the import export parameters of the FM.
    2.There are a few includes and FModules that do not exist in the ECC system, but are available in the other systems. For eg. RSSTAT10 is not available.
    Our question is :
    Since RSSTAT10 is unavailable in the ECC is there an alternate program that can be used in order to generate the report that provides the details of the server workload in the ECC system?
    Regards,
    Prathap

    Check
    Program:- RSSTAT15 in ECC 6.0
    Edited by: Bala Krishna on Aug 14, 2008 12:44 PM

Maybe you are looking for

  • Adobe reader and the video card

    We are experiencing an issue on a couple of PC's with a pdf created in Adobe Pro 9. It appears that when the PDF is opened the video graphics card is affected. Colors and images do not display properly.  The only resolve is to remove the PDF document

  • JOptionPane and not have a valid parent error(Runtime)

    I have the following code in my program ; it compiles but gives me a Runtime error : java.lang.RuntimeException: JOptionPane: parentComponent does not have a valid parent Here is the code : JOptionPane.showInternalOptionDialo(null, "Please  select a

  • XSAN and TSM (Tivoli Storage Manager)

    Hello, I wanted to know if anybody had already used the TSM (Tivoli Storage Manager) solution from IBM to backup an XSAN? From what I have read on the IBM tech guide, the solution is fully compatible. Best regards, Cédric

  • Ram for imac intel core 2 duo

    where would be a good place to order 2 sticks of 1 gb ram for an imac with a 17" screen and 2.0ghz that isn't like overly high price but the ram is reliable and works good

  • How long use with BETA drivers

    2_08_0002Beta driver has been a ok driver!! But when will we get a full retail driver? A company like Creative should and could make real working drivers you think? I want new drivers for my Audigy 2 card, and yes i know there are 2_07_0004 drivers o