Is there any standard sap package which contains examples of web dynpro
Hi experts, Is there any standard sap package which contains examples of web dynpro.
Hi Jrockman,
SWDP_DEMO_TUTORIALS package also contains some demo web dynpro components. There are many standard wd component which you can refer, all of them start with the name WDR, so you can also serach for components starting with name WDR_*.
I hope it helps.
Regards
Arjun
Similar Messages
-
Is there any standard SAP table which stores the license number assigned to a delivery item
Hi Experts,
This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
Our question is: is there any standard SAP table which stores the license number assigned to a delivery item?
We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
Helpful answers Text Removed
Regards,
Jagan
Message was edited by: G Lakshmipathi
Dont add such text in your postHi Lakshmipathi,
The export control log can be accessed by going to delivery Extras-> Export license log
We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
Regards,
Jagan -
Is there any standard SAP report to see all active,inactive, retiree employ
SAP experts
Is there any standard SAP report where I can look all the employees whose employment specific status is 0 (terminated), 1(employee with the company but inactive), 2(retiree), 3(active).
please help
regards
renuHi Experts,
I had a similar requirement and I used S_PH9_46000223 Report for my need as suggested.
I observed one thing.
"If I give Selection Date as "Today" then the entry date column is 00.00.0000"
Can anyone clarify my doubt? it is happening in same way for other similar standard reports as well.
Doubts
1) Why this is happening
2) Is it happening as it should? Whats the reason
3) is there any functional/technical way to correct or modify
Regards -
Module pool / Screen Prog is there any standard SAP functionality ?
Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
Does SAP provides any standarar ready made functionality for the same. ?No, there is no standard functionality for this. dynpros are not designed to "print out". This is what list displays are for. That said, you will need to write your logic to kick off a list display with all of your field values there, then the user can print.
Regards,
Rich Heilman -
Are there any standard SAP reports to filter all BP(in SAP ISU)?
Hi All,
1.Do we have any standard SAP reports to filter all BP(in SAP IU)?I am aware that we can view all the Business Partners in Change/Display mode in the selection screen, but do we have any standard SAP reports to view all the created BP?
2.Do we have any standard report to filter BP(in SAP ISU)? based on certain fields like Authorisation Group?
Look forward to any responses.
Regards
Amitav OttaHi Amitav
Every industry has its own set of information for each kind of industry.There are certain data which is common to all Business Partner through out all industry. Most of that you can find in BUT000 and using SE16 you can generate a report directly through the Table access. But if you are looking for Standard Report than SAP has not provided standard Report for All Industry. If you look to the SAP Menu->Information System->General Report Selection, you will find that industries like Real State Management have reports for their Business Partner. To my knowledge there is no standard consolidated report to list down business partner based on filter for all industry.
Regards
Mithlesh -
Is there any Standard SAP Report?for displaying Billing block/Status-Order
Hi,
Am a ABAP Developer. I heard that there is SAP Query/ABAP Query/Standard SAP report for the below functionality/requirement. SO, pls. let me know if there is any SAP Query/ABAP Query/Standard SAP report?
"This report is suppose to display Credit and Debit memo documents which are blocked and yet has a status of APRV; the other display is for Return Documents which are blocked and yet has a status RCVD."
thanqHi,
Use t-code
V23 - Blocked sales document for billing
VA14L - Sales document blocked for delivery
VFX3 - For blocked billing documents.
Kapil
Edited by: Kapildev Farakte on Jan 8, 2010 4:15 AM -
NWDS - Importing standard SAp packages
Hi,
I am new to NWDS java developmennt.
I have succesfully developed, deployed a demo EJB to J2EE and also able to execute it from my SAP portal server.
I am trying to use the user management API ot Portal (like package com.sap.security.api), however when I write the following statement, it gives an error on my local NWDS build.
import com.sap.security.api;
Question is how do I refer to this remote package (or any other SAP package) which is lying on J2EE on my local NWDS software build.
Thanks,
Amit JainThis is answered. The standard SAP packages are available on local machine.
Right click on project->properties
Selectr Java Build path-> Libraries->Add Variable->Select ECLIPSE_HOME
Hit Extend
Select Plugins
Select com.sap.security_2.0.0
Now the import com.sap.security.api.* statement will not give any syntax errors.
Closing the thread. -
Is there any standard Adhoc query to get the Previous employers list
Hi Experts,
Is there any standard Sap Adhoc query available to get the details of Previous empoyers list.
Please advice me to get the list of employees with their previous employers..
Thank you very much.
Regards,
Vishnu.Hi Vishnu,
U could go as per wat Suhasini has said. But if u want the end user to view this report time and again, then u need to create a query.
The steps are as follows:
1) T-code: SQVI
2) Qucik View: give some name here and then click on "Create"
3) You will get a "Create Quick View" screen.
4) Goto "Datasource" and select "Logical Database" from the drop down
5) Then goto "Tableview" and enter "PNCPE" and click on enter.
6) A screen pops up and click on the Infotypes u would want to extract the data from and press enter.
7) Now, u would get the following screen "Qucik Viewer: Initial screen". Here u can see coulple of tabs.
8) Goto the tab "List selcted field" and select watever fileds u want in the output screen and then press "Execute".
Hope this would solve ur issue.
Thanks -
SAP tool to estimate time for web dynpro development project
Hi,
Is there any standard SAP tool available to estimate time for web Dynpro development project?
Thanks and Regards,
DeeptiHi Deepti
An implementation of Webdynpro based UI could be estimated by a 'standard' technique like any other U:
1. Try to count the number of views/screens/popups in your application. The estimation time will be proportional to the quantity.
2. Try to count the number of external interfaces would be used in the application. For example, quantity of necessary BAPI invocations (RFC), quantity of Web-service invocations or EJB calls. Also quantity of native JDBC queries if any.
Test = Nviews x Hview + Nint x Hint, where Hview & Hint time in hours for average implementing of one UI view and time for adding of average service invocation.
BR, Sergei -
Is there any standard report which contain all these fields
is there any standard report which contain all these fields
1. plant
2. material no.
3. profit center
4. movement type
5.g l a/c
6.posting date
we have it in z form one of the job it does is that what all materials entries came to a single gl we can know from it
like we can know what all materials were charged to repair to p and m a/c.
can any one tell where can we find these field in any standard format in sap.
pls send some suggestions.Hello Sanjeev,
I don't think there is an existing standard report with all the information from KE5Z plus material name.
What I would suggest to you is either:
1) Copy the standard KE5Z program (RCOPCA02) to a Z program one and insert the additional field from MAKT table (it would demand ABAP coding and some considerable effort to develop it);
2) Create a Query (SQ01 transaction) by selecting data from GLPCA (table that is used in KE5Z) and MAKT (table that contains the material name by language).
Hope it helps you.
Best Regards,
Daniel. -
Is there any standard thing in sap to find how old is the invoice or Bill.
Hi Experts,
i have query regading the invoice or bill.
i.e. is there any standard functionality in sap to find how old is the invoice or bill.
Thanks i advance,
Roopa.K.Bill Number and all its corresponding dates may be seen in the table VBRK.
Bill Document: VBELN
Billing Date: FKDAT
Date on Which Record Was Created: ERDAT
Billing date for the invoice list: FKDAT_RL -
Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H -
Is there any standard report which give all information about purchase orde
hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght.
thanks .Hi,
Try following
MC$G PURCHIS: Material Purchase Val Selection
MC$I PURCHIS: Material Purch Qty Selection
Kedar K -
Is there any standard report which give all info about purchase order.
hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic Excise insurance Frieght.
Thanks.Hi,
Following are reports for PO list.
ME2C Purchase Orders by Material Group
ME2J Purchase Orders for Project
ME2K Purch. Orders by Account Assignment
ME2L Purchase Orders by Vendor
ME2M Purchase Orders by Material
ME2N Purchase Orders by PO Number
Message was edited by:
Vigneswaran S -
Is there any standard program or FM to configure mail from SAP?
Hi Experts,
Is there any standard program or FM to configure mail from SAP?
Regards
Ramesh VHi Ramesh,
PFB.
You can use function SO_NEW_DOCUMENT_SEND_API1
Have a look at URL-> http://sapr3.tripod.com/abap011.htm
Check the below forum:
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
Regards,
Faisal.
Maybe you are looking for
-
Issue in OBIEE 11g Presentation service.
Hi All, I found a problem in OBIEE 11g Presentation service, i.e., When i created an analysis with few columns in the criteria, it showed proper result, but when i deleted one column and then again add the same column in the criteria, result did not
-
I am not being able to attach a pdf file to my apple mail after upgrading to os X mountain lion
Hi, I was easily able to attach pdf files to my apple mail. infact I could just open a pdf file and then send it as attachment in the email earlier. but after downloading and upgrading to os X Mountain lion, I am neither being able to attach and sen
-
Hi All, I have PDF in my view, I can send data to backend through PDF but i am not getting results which are displayed on another view. Where as same code displays results if i use HTML UI elements. Is there any difference?. Can any one knows about t
-
I've followed all the suggestions in the sticky thread, repeated them multiple times. Still cannot get my password to work. Please help - this issue has already caused me to be unable to place orders several times in the last 3 months. I'm about r
-
SYSTEM user's accounts get locks automatically
Oracle SYSTEM user's account gets lock automatically after every 4-5 days. I user to run following query which unlocks the account: SQL:\>ALTER USER system ACCOUNT UNLOCK; How I can stop this happening? I am not able to alter profile for unlimited at