Is there any statement to transfer the data from unix server to another

Hi All,
Is there any statement or function module avaliable in sap to transfer the data from one unix server to another unix server apart from FTP(file transfer protocol).?
My requirement : I need to fetch the data from one unix server to another sap server. i have a option of FTP but i need to transfer the unix data to another server internal table.
I need to move the unix data to another sap sevrver internal table
Regards
Raja

not sure what your exact requirement is, but
if both servers are in the same system group, you could potentially just mount the unix directory from the source machine to the target with nfs mount or something.
if not, you could consider remote function call. create a remotable function module on the source machine to read the data into an internal table, and call that function module from the target machine. this requires creating entries in the RFCDES table (i think via SM59?). on the target machine, you would call function y_whatever destination xyz, where xyz is the RFCDES you set up. it works great.
dave

Similar Messages

I had to reformat my desktop pc and lost all my music. Is there any way to transfer the music from the ipod to the pc?

I lost the music on my pc when I had to reformat the disk. Is there any way to transfer the music from the Ipod to the pc? I am told that if I try to sync the music that it will erase all the music on my Ipod.

Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
Transfer other music by using a third-party programlike one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
You can also rredownload mos iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

I have an ipod classic and I did have a macbook pro but it crashed. Is there any way to transfer the music from my ipod without losing everything on the ipod. Because my new computer is a pc it wants me to reset my ipod but I will lose everything.

i have an ipod classic and I did have a macbook pro but it crashed. Is there any way to transfer the music from my ipod without losing everything on the ipod. Because my new computer is a pc it wants me to reset my ipod but I will lose everything.

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Is there any method to export the data from oracle 10g in any format !!!!!

is there any methods to export the data from oracle 10g in the format of excel or csc or txt or anyother. i already downloaded the sql developer tool but it only exports the data of upto one lakh rows ,but i have two tables of more than 3 lakh and 10 lakh rows respectively.for this i used 'where' command to break the file through sql developer but that didnt work
plz help me out if any thing possible
i need to again import this data into microsoft sql if there is any direct method plz let me know
its urgent
Message was edited by:
user628031
Message was edited by:
user628031

Take a look at DUMP_CSV function by Tom Kyte.

I've broke my phone, it won't switch on, is there any way to recover the data from it?

My phone has split up the side after I dropped it down some concrete stairs and now it won't switch on, so I need to know if there is anyway to recover the data from it, such as phone numbers, photo's etc. Anyone had this problem?
I've tried plugging it in to the computer but it doesn't do anything, and tried plugging it in to the wall to see if that will switch it on, but nothing.
Any help gratefully received! Steve

If it will not turn on - you have zero chance of getting anything off the phone.

How do I transfer the data from one iPad to another

How do I transfer all of the data from one ipad to another one?

The best way IMO is to sync each iPad with your computer. Having all your stuff backed up on a computer is a good idea anyway. Just read how many folks here are trying to recover lost stuff that could easily be copied back from either backup or iTunes on the computer.
Sync both iPads to the computer. Transfer all photos to the same computer. Then sync again selecting which items you want on each iPad.

How to transfer the files from one server to another through pl/sql...?

I want to transfer all the files from source server with respective directory to designation server with respective directory (designation server - oracle reside server).
Is it possible to ftp from one server to another server(designation server - oracle reside server) through pl/sql. these two servers are independent & unix server.

No ... The package mentioned in
http://www.oracle-base.com/dba/miscellaneous/ftp.pks
this works for across the server i.e. transfer the files from one server to other (it is basically ftp) ..
So it is NOT correct that this code transfer the file between two location & with in server..

Is there any way to retrive the data from my USB Key

Hello,
I have a usb key I have been using on a Win 7 desktop computer and a Mac Book Air to put in Data on a spread sheet.
I interchange to put in the data between the computer and my MBA without any problem.
I am today not able to open the usb memory key in either-Computer or the MAC Book Air.
Does that mean I have a coruppted USB memory key and the data lost for ever?
I have just put the USB memory key in my computer and it says File System CDFS.
I put it in MAC Book Air and it would not open either!!
Is there any way to access my data. I have no back up...

If the USB drive won't mount on either computer, it's probable that the drive has failed, in which case it's unlikely that you can recover any data from it. You can do a web search for something like "flash drive file recovery" and you'll find a number of utilities that purport to do file recovery, but all the utilities I'm familiar with require that the drive at least be mountable. There may be services that could attempt recovery, but they tend to be expensive.
The moral of the story is: never have only a single copy of a critical document, and if you must, never, never have your single copy only on a flash drive (or floppy, for those "old timers" who still use floppies).
Regards.

I purchased an album from the itunes store on my ipad2 thinking i could retrieve it from my windows pc. I have turned on home sharing and can see my pc library from the ipad but not vice-versa. Is there any way to transfer the album from my ipad library?

I purchased an album from the itunes store on my Ipad2 thinking i could access it from my windows laptop where I sync my ipod. I turned on Home Sharing and can see my laptop libraries from my ipad but not vice versa. Is there any way to fix this so I can transfer the album to the itunes on my laptop?

Yes I tried that. I finally turned off all home sharing settings, shut down my desktop and found them in my account settings in the store on the cloud. So at that point I just had it download everything. But I suspect that with the ipad somehow being on, the store was saying I had already received them? Regardless, my trip today whilst running errands, I was rocking out to vintage Police music! Thank you so much for responding.

Is there any way to read the data from an excel file w/o using a loop structure?

I am retrieving a large amount of data (multiple sheets) from an excel file and would like to extract the entire range without retrieving individual cell values(too slow). I can write an range all at once but cannot read it.

If you are able to write a block of data, then you should be able to read a block. The four requirements that you want to verify are:
1. The Range specified must match the exact size and location of the data block you want to read
2. The returned data is in a 2D array of Variants (either strings or numbers)
3. Use Variant to Data to convert to 2D DBL or 2D Strings
4. Check for the correct orientation for your application (use transpose if it is not)
Michael Munroe
Certified LabVIEW Developer
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Need to pull the data from one server to another server in SSMS using linked server

Hi, I have store proc which will take the parameters passed to it and store it in a table in that server. Now, this table data has to be pulled to another server table which is of same structure. But I need to do that in the same store proc which is in
first server. I have searched in online but could not figure it how to link connection between these two servers and pull data from the first sever to the second. Can anyone please help

You can setup a linked server from Server A to Server B. Then you will be able to query server B from Server A.
eg: Assume you have a database test in Server B which has a table sample. From server A you could run this query to pull details.
Select * from ServerB.test.dbo.sample.
http://msdn.microsoft.com/en-us/library/ms188279.aspx
http://msdn.microsoft.com/en-us/library/ff772782.aspx#SSMSProcedure
You also have other options like distributed queries (openquery), check this blog
http://blog.sqlauthority.com/2007/10/06/sql-server-executing-remote-stored-procedure-calling-stored-procedure-on-linked-server/
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

I just bought a new computer, is there any way to transfer the music from my iphone4 into my itunes library?

Any help would be appreciated.

Use a utility such as Phone to Mac - Pod to Mac | Macroplant.com or Phone to PC | macroplant.com.

Any method to Import the data from Ingres Database to Oracle Database

Hi,
Is there any method to import the datas from Ingres Database to Oracle Database,
Thanks in Advance.

Check out this link.
HTH...

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Is there any statement to transfer the data from unix server to another

Similar Messages

Maybe you are looking for