Is there any sychronizing alaram theme for downloa...

Hi,
Is there any synchronizing alram theme for this mobile. Even nokia 1600 which i used earlier, i had speaking alarm clock. It will synchronize with the actual alarm time and give mesage "this is the time to get up. The time is ...so..so synchronized with the actual time in snoozing also. I get lot of ringing tones, which will only say the tone you saved. Can i ask this kind of question, moderator pl

The speaking clock is the inbuilt function of some of the lower end Nokia models. As for the theme, you can check on the Nokia Store or on getjar.com for applications.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

Is there any third party software for itunes that will do this:

Is there any third party software for itunes that will organize the browser window. Ideally I would like the third browser window (album name) organized by "main albums" "compilations" "bootlegs" "singles"
It would look like this for the Beatles
Main
1963 Please Please Me
1965 Help
etc.
Compilations
1970 Red Album
1990 Greatest Hits
etc.
Bootlegs
1985 Ultratrax 1
etc.
CD Singles
1999 Whatever
This info would be marked on either the info or option tab when labeling.
If this has not been made, one of you nerds should make it, it would be great and you could charge $3 for it and I buy it. and so would 100,000 other people.

If you haven't already, try looking through the Apple Downloads specifically for iTunes.
http://www.apple.com/downloads/macosx/ipod_itunes/
There might be something there that is at least similar to the app your looking for.
edit: There is one shareware that is an iTunes plugin called Multi-tunes. With it you can create multiple iTunes libraries, one library called "Main" one called "Bootlegs" etc, and Multi-Tunes will allow you to quickly switch between them from within the iTunes window. Not exactly what your looking for but close.
http://www.apple.com/downloads/macosx/ipoditunes/multitunesdavidcaldwell.html
Message was edited by: Zookalicious

I would like to know that is there any lab view driver for HP6624A.

Hi
I would like to know that is there any lab view driver for HP6624A.
Regards
Deepaa

Yes, here they are :
http://sine.ni.com/apps/we/niid_web_display.drv_results?p_app_area=&p_man=&p_keywords=6624&p_inst_type=&p_env=&p_drv_type=&p_int=
If in the future you need drivers that are not available then you can request them.
Kind Regards
Steven Bird
Applications Engineer
National Instruments

Is there any student/educational discounts for the new iPad?

Is there any student/educational discounts for the new iPad?

Not from Apple for direct purchase. Schools can buy them in bulk for a discount (10% off when buying ten, I think).

Is there any software instruments available for free for GarageBand?

Is there any software instruments available for free for GarageBand?

andrejeffreyjunior wrote:
Is there any software instruments available for free for GarageBand?
http://www.bulletsandbones.com/GB/PlugInsSoundFonts.html
how to use them:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutsoundfonts
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/PlugInsSynths.html
how to use them:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutAUs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Is there any BTE or Badi for Vendor Outgoing payment posting

Hi Experts,
My client who want the bank commission deduction at the time of vendor outgoing payment on the net values. the bank commission is fix of Rs. 0.07 Paise Per Rs. 1000/-
The scenario is as below:
Client who deduct the deduction at the time of Invoice for e.g. can bhade, Sanstha anamat , Prakriya Kharch ,Vahtuk Bhade, Share anamat etc. this deduction are directly update the Accounting GL .
after that the client pay the vendor dues amount. in this they deduct some deduction through Account (FI) (E.g. Sanstha Audit fee, Shikshan fund, machine anamat) & After deducting the Accounting deduction they calculate bank commission on the net amount (Invoice amount - FI deductions = Net amount)
Dear Expert, Please help me to work out this problem. in sap at the time of invoice we deduct the deduction as per client required & get the vendor due amount properly.
but at the time of vendor outgoing payment i had done the FI side deduction manually but i can't get the bank commission on the net dues amount. client required automatic bank commission deduction on the net amount.
is there any BTE or BADi for Vendor outgoing payment?
Please help me to workout this issue.
Warm regards,
Dhananjay Rahane.

ok

Is there any difference viewer software for reports??

Hi,
Is there any difference viewer software for viewing differences between two oracle reports??
Thanks for ur suggestions!
Madhu

Any version control software, like CVS, allows for line-to-line comparison of different versions of the same file. The problem with reports is that to understand differences you need to save the reports in human readable format that can be REX-file.

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Are there any WWI flying games for the mac?

Are there any WWI flying games for the modern mac? (Computer)
The only one's I can find are on line.
Which isn't always an option when traveling.

You might want to search in the App Store.
Phil

Is there any VIEW or FM for pulling data from VBAK, VBAP?also for VBEP,VBBE

Hi Experts,
1) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBAK & VBAP,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
2) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBEP & VBBE,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
3) Am guessing FOR ALL ENTRIES is better than JOINS in PERFORMENCE perspective, Is am I correct?
thanq
Edited by: Srinivas on May 9, 2008 5:36 PM

Hi Srinivas,
You can use the view WB2_V_VBAK_VBAP2 for fetching data from VBAK and VBAP instead of using a JOIN. Note that, in the view, item data fields will have a I following the field name (POSNRI, MATNR_I are the item data fields from VBAP). The master data fields of VBAK are the same.
As far as i know, there are no standard views provided by SAP for VBEP and VBBE. Not sure if FM exists either.
While using FOR ALL ENTRIES clause make sure that you specify the entire primary key (EX. if selecting from VBAP specify VBELN and POSNR) as fields for selection or in the selection criteria. Its much better if you have the primary key in both. This is really important because without specifying the entire key and using FOR ALL ENTRIES will drastically bring down the performance. And also, If you are fetching not more than 100 or 200 entries using the clause it is fine, beyond that its same as using a select statement within LOOP...ENDLOOP.
So, you have to decide whether to use FOR ALL ENTRIES or a JOIN while selecting data depending on the requirement. If you don't have the entire key either in fields for selection or selection criteria, then its better to use a JOIN or VIEW.
The following is an example for using FOR ALL ENTRIES clause effectively.
         Select VBELN
                    POSNR
                    MATNR
            From VBAP
              into Table T_VBAP
          For All Entries in T_DATA
          Where VBELN eq T_DATA-VBELN
              And POSNR eq T_DATA-POSNR.
I hope this helps, Please let me know if you need further assistance.

Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2

Is there any system level support for RAW files from an Olympus XZ-10 camera. I use Lion and iPhoto version 9.4.2

If there is I can not find it - Google provides a list of possible methods form Adobe and others
LN

Is there any exit or badi for "F-59"?

Hi,experts,
is there any exit or badi for "F-59" after "SAVE"?
Thanks in advance.

Hi ,
You can search an exit for your program by using:
CALL CUSTOMER statement ,it will give you all the function
exits in your program and then in their included you can set a breakpoint
and check which one gets triggered while the save option or
You can also search a BADI for any particular transaction ,
for that first go to T-Code-SE24 and give
the Object Type as CL_ExitHANDLER.
Then double click on to Get_Instance Method and set
a brakpoint on the line:
CALL METHOD cl_exithandler=>get_class_name_by_interface.
Next step is to execute your T-Code f-59.
It will go into debugging mode.
Start debugging by writing EXIT_NAME in the checking area while debugging.
This EXIT_NAME will give the BADI'S used with each screen processed.
Hope it helps
Regards
Mansi
Edited by: MANSI ASNANI on Mar 25, 2009 7:06 AM

Is there any built in software for reading EPUB. In iTunes or iMac ?

Hi All,
Is there any built in software for reading EPUB. In iTunes or iMac ?
Is there a kind of plug in for iTunes that let you read EPUB files ?
If nothing is provided, what woul be the best alternative ?
What's the best software for reading EPUB on an iMac ?
Many thanks.
Bests,

There's nothing built in. I don't know what the best is, but you could try this:
calibre - E-book management

Is there any Best Practice Document for OEDQ development?Please share.

Is there any Best Practice Document for OEDQ development?Please share.

Hello, Please check the below projects, you would get better idea on the best practices like Naming Standards, which processors to use, how to bundle the jobs, external tasks etc.,
edq-cds-data-quality-health-check-9.0.4.(645).dxi
edq-cds-initialize-reference-data-9.0.4.(645).dxi
Regards,
Bala Govi

Is there any sychronizing alaram theme for downloa...

Similar Messages

Maybe you are looking for