Is there any T-code in which we edit the name of our company?

Is there any T-code in which we edit the name of our company?
Actually what a prob. is i made a smartforms in which i pick the name of may comany but its too long so i want to edit my company name so that the databse pick the name & its shown in the form.
The table is ADRC in which the company name is shown.
Thanks,
Sumit.

Hi,
you want to display VARDHMAN POLYTEX LTD-Unit 2 Expansion as VPL- Unit 2 Expansion. in output.
For every Adress number you have option of NAME1 and NAME2.
NAME1 : VARDHMAN POLYTEX LTD-Unit 2 Expansion
NAME2 : VPL- Unit 2 Expansion.
If you are taking company code name in your samrtform. Ask your functional consultant to maintain NAME2 in company code address.
T.code for company code OX02.
Regards,
Chandra
Edited by: chandra sekhar S on Oct 8, 2008 1:18 PM

Similar Messages

Is there any t-code in which the List of Customers Display?

Hi SDN,
Is there any t-code in which the List of Customers Display?
Like the MKVZ, this is the t-code for List of Vendors Display.
Thanks,
Sumit.

Hi,
Following tcodes are related to List of customers.
MER5                   List of Customer Rebate Arrangements
RBPCT                  List of Customer Contacts
SWU5                   Consistency Test for Customer Task
S_ALR_87009951         List of Customer Open Items
S_ALR_87009952         List of Customer Open Items
S_ALR_87009958         List of Customer Addresses
S_ALR_87009963         List of Customer Open Items
S_ALR_87009975         List of Customer Line Items
S_ALR_87009976         List of Cleared Customer Items
S_ALR_87012173         List of Customer Open Items
S_ALR_87012174         List of Customer Open Items
S_ALR_87012180         List of customer addresses
S_ALR_87012185         List of Customer Open Items
S_ALR_87012197         List of Customer Line Items
S_ALR_87012198         List of Cleared Customer Items
S_ALR_87015021         List of Customer Open Items with Ren
VC/1                   List of Customers
VXBC                   SLS: List of Blocked Customers
Thanks,
RKP

On iPhoto you can click info and see which camera was the source for the photograph, is there any way to identify which camera took the video on iMovie?

Is there a way to determine which camera was the source for video clips in iMovie? You can do this in iPhoto by clicking info but I can't find out how to do it in iMovie.

Not as far as I know. (you can often tell from the file name format).
Geoff.

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..

Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..
Solved!
Go to Solution.

I wrote this a few years ago: http://lavag.org/files/file/199-state-machine-follower/
This JKI RCF Plugin sets the Visible Frame property of a Case Structure while the owning VI is running. Use it to follow the execution through the cases in your string-based State Machine/Sequencer when Execution Highlighting isn't fast enough (and, it's never fast enough).
The use-case I wrote this to improve is setting a Breakpoint on the Error wire coming out of the main Case Structure and probing the Case Selector terminal so I can float-probe wires during execution. The problem with this is that I had to manually select the current frame every time. This is boring, so I developed this plugin to automatically set the Visible Frame to the case most recently executed.
You might be able to adapt it to your needs. The basic idea is that a custom probe on the wire to the Case structure's selection terminal sends a notification to a VI that displays the appropriate case.
We might be able to help you develop something easier if you'll give us more information. Is it OK if the code to display the case is in the same VI?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Is there Any T-code similar to

Hi All,
Is there any T-code similar to WPER tcode
We use WPER Tcode in Retail area to see the Inbound & Outbound Idoc Processing Errors or success messages
Is there any other Tcode which is having similar work capabilty
Regards
Suman

Hello ,
Check this Link,
http://www.techhairball.com/concepts/SAP_Retail_Transactions_List.htm
*****Reward points,if found useful

Is there any standard SAP table which stores the license number assigned to a delivery item

Hi Experts,
This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
Our question is: is there any standard SAP table which stores the license number assigned to a delivery item?
We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
Helpful answers Text Removed
Regards,
Jagan
Message was edited by: G Lakshmipathi
Dont add such text in your post

Hi Lakshmipathi,
The export control log can be accessed by going to delivery Extras-> Export license log
We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
Regards,
Jagan

How to do advance payment against PO for this is there any T.code

Hello,
Lt's say for ex: Once Po is created how to pay the advance payment against PO to the vendor, for that is there any transaction code.
Once advance payment is made against PO, again system should not allow for ammendement
So like this to control the system what are the configuration settings need to be done please explain
Early action in this matter will be highly appreciated.

Hi,
Apply the user exit : EXIT_SAPMM06E_016
Following Logic can be use:
1. Validate the company code (BUKRS ) & Purchasing document type (BSTYP = F) from EKKO table for the Purchase order number (EBELN).
2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is any down payment document exists (VGABE = 4)
3. If we find down payment doc in EKBE table then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
Step 1: Validate Company code and Purchasing Document type from EKKO table
Step 2: Check the Purchasing document history from EKBE table
Step 3: Check whether any down payment exists.
Step 4: Display popup message to user:
Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CPo cannot be changed, Down payment already exists for this PO item u201D.
Edited by: redriver on Nov 27, 2011 10:06 AM

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

Is there any java API throgh which My program can get harddisk,cpu ID adres

hello
Is there any java api throuh which i can get hard disk and processor serial numbers.
i have already use
process p=Runtime.getTime().exec("cmd command");
please other than this send any java api, progamming technique that remain same on all plate forms
advance thanks
best regards

>
Is there any java api throuh which i can get hard disk and processor serial numbers.
i have already use ..>1) What business is that information to your app.? Or to put that another way. Why do you want to know?
2) Those words are 'Java', 'API' and 'I' (which is always upper case).
3) One upper case letter should be used at the start of each sentence, not just once at the start of a post.

Is there any t code in SAP to display archived shipping

Hi All
we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
for archived billing documents once thay are unzipped , document will not open in vf03 but we can display in vf07
Please let us know how to view this shipping data in sap ?
Is there any t code in SAP to display archived shipping data (like for archived billing dicuments vf07)
Your kind help would be highly appreciated.
Thank you
Rajendra Prasad

Hi Rajendra,
Whats your SAP version? VT03n supports display of archived data from 4.7onwards. If you are in a lower version then i think you should use infostructures.
Thanks,
Naveen

Is there any t code in SAP to display archived shipping data

Hi All
we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
for archived billing documents once thay are unzipped , document will not open in vf03 but we can display in vf07
Please let us know how to view this shipping data in sap ?
Is there any t code in SAP to display archived shipping data (like for archived billing dicuments vf07)
Your kind help would be highly appreciated.
Thank you
Rajendra Prasad

Hello,
Once shipment document is archived then you can't display by VT03N transaction. As you have pointed out SARI or SARE transaction will help in displaying the archived shipment documents from archive server. (you have to select Archiving object = SD_VTTK and Archive Infosturcture = Select from display option).
VF07 - Display archived billing document. We call this transaction VF07 as archived enable transaction.
I have gone through the OSS note 590656 mentioned by Eduardo Hinojosa, with this enanchment of VT03N (respective program) you should be able to display archived shipment document. This Oss note should help you.
let me know if required further clarification on this.
-Thanks,
Ajay
Edited by: Ajay Kumar on Aug 25, 2009 6:16 AM

Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

Experts,
Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
Thanks in advance
Krish

Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?

TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64)
Command> dssize;
PERM_ALLOCATED_SIZE:      51200000
PERM_IN_USE_SIZE: 45996153
PERM_IN_USE_HIGH_WATER:   50033464
TEMP_ALLOCATED_SIZE:      2457600
TEMP_IN_USE_SIZE:         19680
TEMP_IN_USE_HIGH_WATER:   26760
Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?
tried to use ttsize function, but it gives some senseless results – for example, for the biggest table, tokens, it produces following output (that this table is 90GB in size – what physically cannot be true):
Command> call ttsize('tokens',null,null);
< 90885669274.0000 >
1 row found.

Are you able to use the command line version of ttSize instead? This splits out how much space is being used by indexes (in the Temp section of the TT memory segment), which I think is being combined into one, whole figure in the procedure version of ttSize you're using. For example:
ttSize -tbl ia my_ttdb
Rows = 4
Total in-line row bytes = 17524
Total = 17524
Command> create index i1 on ia(a);
ttSize -tbl ia my_ttdb;
Rows = 4
Total in-line row bytes = 17524
Indexes:
Range index JSPALMER.I1 adds 5618 bytes
Total index bytes = 5618
Total = 23142
Command> call ttsize ('ia',,);
< 23142.0000000000 >
1 row found.
In 11.2.2 we added the procedure ttComputeTabSizes which populates system tables with detailed table size data, and was designed to be an alternative to ttSize. Unfortunately it still doesn't calculate index usage though, and it isn't in 11.2.1.

Is there any T-code in which we edit the name of our company?

Similar Messages

Maybe you are looking for