Is there any table or report that available in SAP for any PR/STR

HI All,
Is there any table or report that available in SAP for any PR/STR that are remain opened after S/O canceled.
Please advice at the earliest.
Thanks
Chandru

Chandru,
Of course. The standard MD06 transaction will display ALL MRP generated exception messages, and will take you to the individual material to allow you to determine how you wish to respond to it.
So, MD06>enter the plant. Optionally, enter the controller if you wish to limit the results by planner.
If you are interested in Sales order cancellations, then these exceptions would be categorized by SAP as belonging to the "exceptions during Scheduling" or "exceptions during availability" groups. On the Exceptions group tab, select these two items (6&7), deselect the rest. Enter.
You are now presented with a list of all materials that contain one or more of these exceptions. From the menu bar at the top, select Edit>Find. If you get a 'statistics' popup, click through. Select the 'Find Exceptions' tab.
Message 26 "excess stock in individual segment" means that in a MTO environment, you have more supply than demand against given order/items (as you would have if a cust. cancelled his MTO order). Select this message.
Message 20 "Cancel Process" means that you have a supply element that has NO requirements (as you would have if a cust. cancelled his MTS order). Select this messaege.
Message 15 " Postpone process" means that you have supply elements that are scheduled to be received earlier that necessary (as you might have if a Cust cancelled his MTS order). Optionally select this message.
Clik the green check. You will now notice that certain rows on the listing are highlighted. These are the ones that contain your problem children. Hit the "glasses selected MRP list" button.
This takes you to the first MD05 of the highlighted items. Review the problem. Decide what to do: Cancel a supply element? Push out a supply element? Leave it alone? Call customer service to discuss which order was cancelled and why? etc etc etc...
Once you are done with the first material, clik on the 'next material' icon or hit Ctrl-F2. Repeat. Continue till all materials have been evaluated and resolved.
This works for any other MRP message as well.
Regards,
DB49

Similar Messages

UCCX8 Is there a log or report that shows IVR/CTI port availability over time

Question:
Is there a log or report that shows IVR/CTI port availability over time?
Objective:
We are trying to determine if, when doing a Call Redirect step, the IVR/CTI port stays the same or the port is made available by the first script and the second script, where the Call Redirect is redirecting to, has to reserve its own IVR/CTI port.
What we have done already:
We limited the Call Control Group to 1 CTI port and ran the scripts that do the Call Redirect step and it worked fine, so we are assuming that there is not a point where the transfer takes up two IVR/CTI ports at the same time.
-Lauren

Hi,
if it's UCCE, then if I remember that correctly, there is a webview report that would tell you Network Trunk Group utilization. Or, actually, you can extract this information yourself from the HDS table named Trunk_Group_Half_Hour.
G.

Is there any table or report to see basic price billing doc wise in mass

Dear experts,
is there any table or report to see basic price billing doc wise, in mass, please help
regards
rajakarthik

Hi
If your basic price is same as Net price then you can check it in table VBRK.
If Basic Price is not same as Net Price then from the table VBRK you will have to take the value of KNUMV and then with respect to this KNUMV go to table KONV and take the value of KWERT.
To check the value in mass you may make a report with the help of ABAP or by your own using SQVI transaction.
Regards
Amitesh Anand

I have Acrobat Pro 9.0. Am happy with it since I only have occasional need. Haven't updated it. Is there a way to do this? Do I need toy go through updates sequentially if they are available? Thanks for any help.

I have Acrobat Pro 9.0. Am happy with it since I only have occasional need. Haven't updated it. Is there a way to do this? Do I need to
go through updates sequentially if they are available? Thanks for any help.

Hi Spiral Geronimo,
It is always recommended to update the software to its latest updates. I would suggest you to update your Acrobat 9 to its latest updates. You can download the updates from the link below:
http://helpx.adobe.com/acrobat/kb/update-patch-acrobat-reader-7.html

Screen or Report that shows all Responsibilities for Org Unit

How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you

VAT reports which are available in SAP for Canada and Puerto Rico

hello all,
Does anyone know the programs/transactions for VAT reports which are available in SAP for country Canada and Puerto Rico?????
Thanks in advance.

As far as I know (and I live here), there is no VAT in Canada. You might look for GST or HST reports.
Rob

How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

Hi kwalker08865,
It would appear that the most recent version of Safari that is compatible with OS X 10.5.8 would be Safari 5.0.6. If this would meet your needs, you can find more information and a download link on the following page:
Safari 5.0.6 for Leopard
Regards,
- Brenden

Asset Accounting Reports - Can they be run for any selection of dates

Folks,
I have a query - in Asset Accounting, can I run any of the reports (for current fiscal year and closed fiscal years) for any selection of start and end dates? so for example, if I want to run the Asset history sheet for fiscal 2007 (which has been closed in my books), can I run this report for say the month of July 2007 (July 1-31, 2007)?
I was under the impression that asset reports for closed fiscal years could be run for the entire year ONLY!
An early response would be appreciated.
Thx,
Sameer Aroskar

Hi Sameer
I think I did answer this in other forum but anyway here you go again !
Select Transaction OARP >> Depreciation Lists >> RAGAFA01(Posted Depreciation) - Select this and Execute.
Select the require company codes and necessary parameters then under Settings select the Depreciation Posting Period e.g. 4 for the required Report date which can be last day of the month from the required previous years. eg 30.04.2007 etc.
Cheers !
SA
PS: award points if you find the answer useful.

Report that display payment terms for account receivables customers

Hello To all,
Please can you help us to find a standard report that list account receivables customers with their payment terms.
Regards.
Zied.

Hello,
Thank you for your response but user has not authorisation to access to SE16 and we need a report to do this.
Or may be we can create a query that use KNB1 table.
Regards.
Zied.

Report that generates total amount for cost elements/department

Dear Experts,
I have been using report GR55 in which generates the total amounts via cost centers and cost elements groups however, it displays a detailed distribution of cost rather than by department, example below.
Mining
    Labor 500
    Material 1000
Development
    Labor 500
    Material 500
While business requires a report that displays the total cost per department rather than the example above, the report should display the following example.
Mining 1500
Development 1000
Is there a report in standard SAP that generates the example above?
Appreciate your help
Jan
Edited by: UserID on Jul 20, 2011 4:48 AM

HI,
You will get the cost center wise report by using T code KSB1.
Please check and confirm.
Thanks and Regards
Binoj M D

Any suggested cooling pad that is real good for GT70 2OC?

So, recently I've been playing games for quite a long period so I would like to buy a better cooling pad to cool down my laptop. Any suggested cooling pad that is not that expensive?

hi there coolermaster makes some pretty good looking one i ahve yet to buy one because im still trying to decide which laptop i want to buy, im new here and cant post links yet so lookup the coolermaster SF-15 and the coolermaster storm sf-17 hope this helps you

Simple report that extracts marketing attributes for contact persons

HI
I want to extract the marketing attributes for contact person and to have certian output fields ,
Can anyone help by finding an existing report that i may make some changes in it.
Thanks ,

..

Packing how do u configure in sap for any material

Pls let me know
1.The process of packing for any material in sap
2.If a project is going live on 1/06/07 and if delivery , billing takes place in the legacy system on 30 and 31/05/07 how do u activiate it in the prod system
3.what is the exact role of migo and miro process in third party sales

Process of packing
Path: IMGLogestics executionshipping--packing
1) Define Number ranges for Handling Units
     Here we define the number ranges for packing the units.
2) Packing control by item categories:
    Here we define if the items categories that we use can be packed or not.
3) Define requirements for Packing in the delivery
    Here the requirement for packing is set. We are using std requirement. We can create our own requirement for example saying that the packing is not possible if credit block exists.
4) Define packing materials
Here we define the packing materials that we use. the material master for materials must be created and the material type is VERP. In the sales: general/ plant view in packing material data the corresponding packing material has to be enterd in the packing material type field. Ex: you create packing material Z003 and call it wooden box, then you must enter Z003 in the material masters sales: general plant view in the packing material type field.
5) Define material group for packing material
This group has to be mentioned in the material master of all the materials that have to be packed. Ex You define a material group grp1, then you must mention this in the material master sales: general plant view in the packing mat grp pack matls field.
6) Define Allowed Packaging Materials
Here we define all the materials that are allowed for packing along with the respective mat group. Ex: You have created three packing materials (step 4)
a) z001: Plastic trays
b) z002: corrugated box
c) z003: wooden box
you have also created a packing material group grp1 (step 5)
Now you must assign z001, z002, and z003 to the packing group grp1

Java update 51 for Mac OS X 10.6 causes several programs to break, will there be an update for 10.6? I saw that there is one for OS x 10.7 available, but not for any earlier versions

Can anyone tell me if there will be such an update soon, and possible when we can expect this?
Thanks!

Yes, it's Java update 16 for Mac OS 10.6 that broke lots of stuff. The 51 comes from it updating Java to 1.6_51. There is an update to the update for 10.7 and up posted, but is there one for 10.6?
UPDATE: Never mind. If you go to the download page for Java update 16, it appears that it has been silently updated. Although there isn't any indication of the fact that it has been fixed, the build number is different (20.51-b01-457 instead of -456).

Is there a table type ATTRIBUTE that can be defined in an ABAP object?

Hi. Within SE24 on the Attributes tab, is there a way to define an attribute of type TABLE? If you put in STANDARD TABLE as the reference type, it does not allow a generic table type.
What I want to do is pass in a standard table type to my constructor, and then assign it to a private table attribute in the object.
I do not want to assign the table to a local variable of the constructor. I want to store the table in a private object attribute. I don't mind if the attribute type is a specific table type (such as KNA1), I just want to be able to assign the constructor's table parameter to some type of private object attribute.
Thanks.
Brendan

Hi Brendan,
No they are not same. A modelled class or method or an attribute will not have any realtime appliaction. Say for example you want to provide a method or Attribute which may be used in future or expected to be used in future, then you declare that method as Modelled. YOu can execute such a method or access such an attribute.
Abstract Class is an executable class...but it will have some methods with no implementation. The implementation of such methods will upto the user who is accessing that class.A class defined as ABSTRACT cannot be instantiated, that is, you cannot use CREATE OBJECT with reference to the class. Instead, you can only address the class using its static components or its subclasses. The major purpose of an abstract class is to serve as a template for subclasses.
If a class contains abstract methods, that is, method declarations with the ABSTRACT addition, the whole class must also be abstract (that is, have the ABSTRACT addition), since a class may not be instantiated if it has unimplemented methods. Equally, if a subclass does not implement all of the abstract methods of its superclasses, it must itself declare them abstract.
Regards,
Vara

Is there any table or report that available in SAP for any PR/STR

Similar Messages

Maybe you are looking for