Is there any trustworthy Exchange BKF repair tool?

I need to export some critical data (edb and log files) from the exchange bkf file but due to some networking problem, backup process got interrupted which made bkf file inaccessible. After searching a lot about this over Internet, I found that majority
of the people have advised to use any utility for that.
Can anyone suggest any efficient utility to export data from damaged exchange bkf file?

Hi Tuckor,
You can try any of the following Exchange BKF Repair tools:
http://www.stellarinfo.com/email-repair/exchange-bkf-repair.php
http://www.taskmanagerfix.com/exchange-bkf-to-pst.html
http://www.bkfrepairtool.org/exchange-bkf-recovery.html
http://www.exchangebkfrepair.com/
PS: I have not used any of the above tools, while searching on Google, I found some of them. But I have used some other products of
Task Manager Fix and Stellar Phoenix and they did exactly what I needed. So, I think you can depend upon their other products as well but I would advise you to test  free version of every product first
to check if the particular tool is able to repair your corrupt Exchange BKF file or not. Chhose sensibly.

Similar Messages

  • I'm wondering is there any way to see what tool is selected in full screen mode?

    Question: Is there any way to see what tool is selected in professional full screen mode when tools and windows are hidden?
    Here's an example what i mean..i made a sketch
    So what i mean is for example you are in full screen mode, and you press "U" to activate Rectangle Tool >>> you see like pop-up or anything similar that shows you what tool is selected.
    Thank you!

    you need iPhoto v9.2 or Aperture 3.2 to view the stream on your Mac.

  • Are there any good black box testing tools for j2me?

    Is there any good testing tools available for testing software on physical mobile devices?
    I would like to partially replace manual testing with automated testing using a test tool. It should work on physical devices, and with the help of a script it should be possible to execute predefined sequences of button pressings on the device. Preferably there should also be some way of deciding whether the test was a succes without having to do so entirely manually.
    The purpose with this would be to make it easier to go through the test protocols, which has to be done before every new software release.
    Deviceanywhere.com looks promising at first glance but it is rather costly. Still, does anyone have an opinion of it?
    Does anyone has experience of Mobile junit for this kind of testing? Is it possible to define series of physical button pressings with it? At first glance it doesn't seem so.

    You can collect the Organizational Health in Exchange 2010 console for Exchange 2003/2007/2010 and that will list very useful information about statistics in your organization like servers, databases, CALs, recipient, feature used etc...
    Collect Organizational Health Data -
    http://technet.microsoft.com/en-us/library/dd351156%28v=exchg.141%29.aspx
    However it doesn't contain any configuration information and that you need to collect it manually because that depends on needs of each organization and how they want to setup their infrastructure...

  • HT201371 i have iphone 4s with damage screen, where i can get it repaired, and i am living in Qatar. Is there any way to get repair from iphone

    I have iphone 4s with damage screen, is there any possibility to get it repaired i am from Qatar. Here the main dealer of Apple is Iphone. and they are not accepting any Iphone device which purchased from outside vodafone. Please tell me the sulution.???

    iPhone warranty is valid only in country of original purchase. You must
    return the iPhone personally or via friend/relative to where it was sold
    to have it evaluated.

  • Any free code flow dumping tools

    Hi All,
    I am new to this forum. I started work on a new project, for which there is already
    some existing codebase. I need to provide a feature enhancement, which
    requires changes in most of parts the source tree. Before doing that, I would like
    to get a feel of how the existing classes are interacting and how the code flows,
    for a user request/operation.
    Are ther any free code flow dumping tools, which basically dump the stack trace,
    to a file. These tools are not same a code coverage tools, which keep track of
    the number of lines of code executed. I tried searching in the web, sourceforge
    and Eclipse plugins site, but no luck.
    If any one is aware of such tools or if there are alternative approaches of getting
    such information, kindly share it with me.
    Thanks
    Tejo

    I don't know any, but when i need something good and free i check
    http://www.sourceforge.net
    You can find good stuff there

  • Are there any out the box tools for detailing Exchange organization ?

    Are there any tools which we go out an audit an exchange enviornment showing the servers, roles and configuration ?  it needs to be able to get this information ideally for all versions of Exchange 2003, 2007, 2010 and 2013.
    Thanks in advance.

    You can collect the Organizational Health in Exchange 2010 console for Exchange 2003/2007/2010 and that will list very useful information about statistics in your organization like servers, databases, CALs, recipient, feature used etc...
    Collect Organizational Health Data -
    http://technet.microsoft.com/en-us/library/dd351156%28v=exchg.141%29.aspx
    However it doesn't contain any configuration information and that you need to collect it manually because that depends on needs of each organization and how they want to setup their infrastructure...

  • Is there any way to setup server side deferred delivery in Exchange 2013?

    We are utilizing 3rd party software to generate reports and email results.  Unfortunately, the software cannot be configured to execute at a specific time, date only.  This means that some reports are being processed and delivered at 12:00 am.
     For business reasons, management would prefer that those emails not be sent at midnight.
    We are looking for a solution that would allow the messages to be generated at midnight but not be delivered by Exchange until several hours later.
    Is there any way to set a deferred delivery option server side in Exchange?  It can be set through Outlook, but only applies to mail sent from Outlook.
    Any advise or recommendations would be greatly appreciated.
    Thanks

    I afraid that it can't be done in Exchange with native features. You might need to develop custom transport agent or need to utilize the 3rd party tool to achieve this...
    You can try in Development forum to see if you can get any help there...
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Is there a Lightroom Catalog Repair Tool?

    I think my Lightroom catalog is fine but I did notice that the integrity check and optimization process took a really long time at one point.  Seems to be back to normal now, and there were never any error messages.
    Catalog has about 35,000 images in it and the backup is about 650 MB.  A normal integrity check/backup/optimization routine takes about 3 minutes, tops.  So when the integrity check by itself was taking 10 minutes, I was getting concerned.
    I'm curious if there is a separate repair tool for the Lightroom catalog.  Microsoft has this type of tool for Microsoft Outlook- called ScanPST it is designed to scan through and repair most problems with the Outlook database.  It would be great if Adobe had a similar tool for the Lightroom database that did not require running Lightroom.
    I can't believe the developers don't have an internal tool that they wrote for that purpose... trick would be getting them to release it to the general public.  (If anyone knows where I can make such a suggestion where it might actually take flight, lemme know.)

    MarloPix wrote:
    I'm curious if there is a separate repair tool for the Lightroom catalog.
    There is not. If catalog goes bad, your only recourse is a backup (I mean, other than ad-hoc repair, or giving to somebody at Adobe..), and if you're smart (er, I mean "concerned enough"), you'll save (xmp) metadata too, as you edit, to supplement a saved catalog backup, should the need arise. That's just my opinion - some people are comfortable relying solely on catalog backups, and don't bother with xmp.
    Suggestion box: Recently active topics in Photoshop Family about Photoshop Lightroom
    Keep expectations low: most suggestions go unacknowledged for years..
    Rob

  • When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

    When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Is ther any standard report for GR/IR Maintenance Main Tool

    is ther any standard report for GR/IR Maintenance Main Tool ?

    Hi Salsa,
    Use Tcode MB5S --> List of GR/IR Balance.
    Assign pts, if found useful
    Regargds
    Sandeep Acharya

  • Is there any tool to check whether the proper data is inserting or not?

    Hi,
    We have different products A,B and C.
    whenever user crates an account under these products some X,Y,Z table gets updated.
    If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
    If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
    Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
    p.s : if this thread is not related to this forum .. where can I post?
    Thanks,
    Praveen

    Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
    If you want to restrict the columns to specific values then you can use constraints.

  • Is there any way to export IT Resource data from OIM using the export tool?

    Hello,
    we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
    Thank you for your help
    Kind Regards

    Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
    Directly updating the DB could be an option ..
    Thanks

  • IPhone calendar appointments set to local calendar, and need to switch to exchange calendar. Have to edit each appointment one at a time and change to exchange calendar. Is there any method to edit all appoints in my calendar at once?

    iPhone calendar appointments set to local calendar, and need
    to switch to exchange calendar. Have to edit each appointment one at a time and
    change to exchange calendar. Is there any method to edit all appoints in my
    calendar at once and change the calendar setting?

    Not sure this will work but if you go into the Keyboard preferences, then click the Keyboad Shortcuts tab, and then the '+', you can add your own shortcuts for any application.  I am not sure what happens if you try to override an existing shortcut since I haven't tried using this.
    Edit/Update:
    Probably against my better judgement I'll also throw this out there - there's an Unsanity haxie called Menumaster which might also allow you to do what you want.  Against my better judgement because personally I stay clear of haxies.  It's (all haxies) probably almost certain to break in Lion.  They always do with each major release.

  • I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

    I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

    I sent it via FedEx. 
    Call FedEx.  They will be able to track their own packages.  They will let you know if your iPod Nano was delivered and to who!

  • Are there any 3rd Party Cloud Application Readiness Assessment tools in the market today?

    I have couple of interrelated questions here:
    1
    Are there any 3rd party tools, which do Cloud Readiness  Assessments for on-premises Applications. I am looking for names of any such tools, if they exist, which thoroughly analyse on-premises applications, and generate detailed reports on whether the
    application is ready for moving to the cloud (and why?), or if it needs some changes before moving (which changes?), or if the application needs major changes (which?) or cannot be move to cloud in its present form. The cloud here could be Azure (1st pref)
    or AWS (2nd pref).
    2
    From the tools named in response to above questions, which are the ones which can be used for doing applications assessments for a large number of on-premises apps in most efficient way? Do such tools actually exist? Imagine scenario that an enterprise customer
    comes to me and asks that they want to check the cloud readiness for 3000 applications in shortest possible time - What tool will you recommend for such massive assessments?
    Thanks, LH

    Hi,
    I would suggest you to check this Microsoft Cloud Self Assessment Tool.
    For more information on this, refer this link:
    http://blogs.technet.com/b/schadinio/archive/2012/07/09/microsoft-cloud-self-assessment-tool.aspx
    Regards,
    Azam Khan

Maybe you are looking for