Is there any value for free storage requirements to SQL Server 2K8 R2 to run?

Grettings
we have a SQL Server 2K8 running on a Server that has less than 10GB of free space.
Do we have a problem with that? what is the storage requirements to SQL keep running normal?
Thank you in advance

Hi LmmLopes,
If you are talking about 10GB free space on the primary drive I think you should be able to run your SQL server without any issues.
Please find the chart below for the Hard disk requirements.
Hard Disk Space Requirements (32-Bit and 64-Bit)
During installation of SQL Server 2008, Windows Installer creates temporary files on the system drive. Before you run Setup to install or upgrade SQL Server, verify that you have at least 2.0 GB of available disk space on the system drive for these files.
This requirement applies even if you install SQL Server components to a non-default drive.
Actual hard disk space requirements depend on your system configuration and the features that you decide to install. The following table provides disk space requirements for SQL Server 2008 components:
Feature
Disk space requirement
Database Engine and data files, Replication, and Full-Text Search
280 MB
Analysis Services and data files
90 MB
Reporting Services and Report Manager
120 MB
Integration Services
120 MB
Client Components
850 MB
SQL Server Books Online and SQL Server Compact Books Online
240 MB
But if you are talking about the 10 GB on the entire server. Then you need to consider the database size and its expected growth.
You can consider adding additional disk drive and use it to store the data files.
Hope this answers your question.
Regards
Sathish S N

Similar Messages

BI7.0(Stack 11)-3.X Analyzer- Is there any limit for Free Characteristic?

Hi All,
We are on BI 7.0 Stack 10. . The same happens in Stack 11 too.
Problem : Looks like when a query with 101 or more free characteristic is executed in 3.X Bex Analyzer, the swapping of the characteristic will bring different characteristics. Even the Add drilldown also does the same.
NOTE: I just have a single key figure in columns and a single characteristic in row.
For Eg: If I swap country with city, then instead of city it might bring employee.
This does not happen if the free characteristic is = 100. if it is greater than 100 then it does a bad swapping or drilldown.
NOTE: I did not see this problem in the 3.X web runtime.
As per sap's help there is no limit for free charcteristic. Please see the link below.
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/content.htm
Please let me know if anybody else came across this problem or any OSS note available on this.
Thankyou,
-Sini

Photoshop > Preferences > Interface > Show Transformation Values

Is there any software for free to download so i can....

convert the movies so i can put it on my iPHONE?
software?

I can't install this software....
It says..
"Handbreak can not be installed on systems with .NET Framework version smaller than 2.0"
Anyone happen to know what the heck this means?

Is there any hope for Mac users with AMD D700 graphic cards trying to run Adobe Premiere 2014 CC?

Who wants to watch a grown man cry? I spent a small fortune on a shiny new mac with 64GB Ram and to quote Larry Jordan, "I could rocket to the moon with the power of this computer." I am running OSX (10.9.5) and have a 12 gig per channel ethernet Maxx Digtial Raid with Areca cards to support 6K footage. However, editing my first project in Premiere CC2014 (leaving FCP 7) has been nothing short of problematic. At first, it plays great but after 20 minutes of editing, speed changes, adding secondary shots etc it starts to play choppy, freeze on certain frames playing just audio and eventually crashes or it takes a minute to render.
I did every possible thing yesterday with Adobe and Apple support. I reinstalled the OS, I trashed 3rd party preferences, trashed Premiere preferences, set project settings from OpenCL to software only and I tried changing location of the Premiere Cache folder but nothing seems to work. Eventually the last Adobe support person said it was due to the AMD card and Adobe. He was emphatic that it was Apple's fault. Apple's support team said it Adobe's. Well after that, Im still stuck. Is anyone else experiencing this? Any pieces of the puzzle?
Is anyone else having the same experience?

The default for CPU Voltage is By CPU VID default for Adjust CPU VID is Startup which should be 1.4 volt. Since Cool'n'Quiet requires a driver to run and I also show low CPU VID in cmos it should be 1.4v but I tried with Cool'n'Quiet disabled and also tried setting CPU VID to 1.4 but have never made it to 1.4 I also tried setting it to 1.425 which is the next step and still read under 1.4.

Are there any shortcuts for creating Value Object Classes?

Hi,
I'm using a Remote Object to connect to my server
(pyAMF/Django). I'm getting stuck with the creation of Value Object
Classes. It doesn't seem very DRY to have a class on my server
representing the data model and then have to recreate that class
and all its properties in my Flex app.
Are there any shortcuts for creating client side VOs from
server side data?
I was thinking about declaring an empty VO class in Flex, and
then dynamically assigning/casting my Proxy object to that class.
It seems like that approach may cause problems for the Flex
compiler though.
Any hints?
Thanks!

quote:
Originally posted by:
tptackab
Oh man, do I feel your pain. I'm not sure what middle-tier
technology you're using, but I'm using Java (w/Spring) and I
absolutely hate having to create and maintain two sets of VO (aka
data transfer - DTO) object for Java and Flex.
One thing that has helped me in that area is a free tool from
Farata Systems called
DTO2Fx. If you're using Java and Eclipse, it's a great time saver.
You simply install a (very lightweight) Eclipse plugin, add a
single annotation to your Java VO classes, and it automatically
generates your Flex VOs. It even creates a base and extended
version of each VO on the AS3 side so you can add code to the
extended VO without fear of having your changes overwritten when it
regenerates your Flex VOs.
Here's a like to thier
PDF that
gives instructions and a download link. I had it up and running in
my application in less than 30 minutes!
I'm using Python/Django serverside (PYAMF is my AMF
serializer).

Is it possible to make connection for the VC application the SQL Server

hi
I have requirement like, We have some data available in SQL server as central repositoty. My client want to make the Anylatics application like showing graphs in VC based on the data available in SQL server.
My question. Is there any possiblity to make the connection the sql server by creating some system object using some JDBC connection Like that.
What is the possibility.
can u any body tell what is the work around need to be for this requirement. Whether it is possible or not.
Regards
vijay

Hi Vijay,
In your other thread, I have given the link to the following doc which will help you to in configuring the JDBC Connector.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/b00917dc-ead4-2910-3ebb-b0a63e49ef10
That was the first step.
In the second step, you need to create a JDBC System in the portal. Go through the following doc which explains how to create BI JDBC system for VC. All you need to change is that on Page 10, choose JDBC system instead of BI JDBC system, and do the necessary configurations.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
As rightly said by Marcel, you can use stored procedures as well as SQL statements. As far as stored procedures are concerned, all you need to do is go to Enterprise Manager, and create procedures in your database in the same way by which you create new tables and users (Refer my article). Then you can use these procedures in your Visual Composer provided you have properly created the JDBC system in portal properly.
Also have a look at the following doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6339e7d4-0a01-0010-1c98-db00e52e989a
Bye
Ankur
Do reward points for helpful as well as solved answers!!

Is oracle lite free or is there any license for Oracle Lite 10g for product

Is oracle lite free or is there any license for Oracle Lite 10g for production use ??
-Thanks-

Please note that Oracle Lite is no longer being actively developed, and no further releases are planned. The recommended small footprint database from Oracle is Berkeley DB.
http://www.oracle.com/technetwork/products/berkeleydb/overview/index-085366.html
Eric

There are values for cost element 80000 that are not assigned to any line I

Hi,
While calulating WIP I am getting below error:
There are values for cost element 80000 that are not assigned to any line ID
Message no. KJ161
Diagnosis
Not all values for the cost element are assigned to a line ID.
Procedure
Assign the cost element to a line ID. If you don't want to include the cost element in results analysis, assign it to a line ID of category N.
You can access a detailed list of unassigned cost elements as follows: Start results analysis in the individual processing mode (transaction KKA1, KKA2, or KKA3). Select the field Full log. Execute the function. On the next screen, choose Logs -> Parameter List in the menu. A list is generated. The unassigned values are shown at the end of the list.
If cost element "+++++++++" was shown in the message, this is because in the assignment of costs and revenues to line IDs, you have not used a cost element other than the full masking "+++++++++". In this case a presummarization eliminates the information on the cost element.
Cost Element 80000 is of type 43 Internal activity allocation, I have Masked this in OKGB as below:
Controlling Area = FLGP
RA Version = 0
Masked Cost Element = 000008++++
Masked Cost Center = ++++++++++
Masked Activity Type = +++++
ReqToCap= COS (Secondary Cost)
I have Configure OKGA also but still system is giving error.
Please help me to understand.
Regards,
Vivek

I was wondering if you could help me I am trying to configure the RA key for Refurb orders and when I go into txn OKGB for the Assignment of C/E for WIP there is sample config already there which I copied. But I am having difficulty getting the KK1A to work I am getting the message as outlined above. Could you explain how this OKGB works and how to configure it a bit more fully. In my sample config there is a ReqTOCap section and in it there are letters like ABR, EK, FK, EL what do they mean. This is a screen shot of it. I am not sure how to go about this entirely so any light you could shed would be greatly appreciated. Can you suggest a good resource or documentation you may have, would be greatly appreciated.

GR based IV to be checked for free text requirement

Hi All,
Is there any option that if we create shopping carts for free text requirement,GR based IV should be checked automatically in purchase order created for that shopping cart.Or will this get replicated depending on vendor master we select.Please suggest.
Thanks.

Hi,
As of standard, this setting in PO would come from Vendor master only. But in case you want this to happen for all free text items, then you can use the doc change badi as suggested by Masa. You should use the po change method to pass this indicator.
Regards,
Sanjeev

Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

Hi Experts,
In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
thanq

hi
check these links out
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
regards
vijay
reward points if helpful

I recently gave my old iPhone to my nephew, he switched it to his phone account, but somehow I now have his contacts on my new iPhone 5. When I look at my iCloud account, it lists his contacts. Is there any way for me to get my contacts back?

I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?

This is caused by using the same iCloud account on both phones. When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores).
Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source. You could try restoring to your last backup but this doesn't always work for contacts. (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.)

Is there any software for macbook to recover a deleted file?

Is there any software for macbook to recover a deleted file?

Hope & prayer?
Whatever it is you end up using, it is IMPERATIVE you stop using the Mac until the rescue is completed.The more the drive gets modified, the greater the chance that the storage area the deleted file used to occupy will get written over, thereby making rescue impossible.

HT4967 Mobile Me was so handy. I pushed the little sync button and everything updated. Is there any equivalent for I Cloud?

Mobile Me was so handy. I pushed the little sync button and everything updated. Is there any equivalent for I Cloud?

Welcome to the Apple Community.
Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage. (not all these alternatives offer all the services previously provided by iDisk)

Are there any fixes for iPad 2 with OS 8.1.1.

Are there any fixes for the iPad 2 IOS 8.1.1? I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response. These problems have been occurring since the last update. At times the iPad becomes unusable. I have been keeping all programs closed and history and web site data cleared. Thanks for any help you can give.

Hi, dannilee,
I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
To improve the performamce, I have tried these:
1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
Hope it is useful for you.

Is there any BAPI for BOM creation? which does by RCSBI010 / Batch Input.

Hi Experts,
I need to Upload the extracted Excel-file(.txt) for BOM creation, so, pls, let me know that, Is there any BAPI for this purpose. In detail the requirement is that,
The suggested idea shuld work as like as pgm. RCSBI010
thanq
Edited by: Srinivas on Feb 14, 2008 6:18 PM

Hi Srinivas,
Try these Function Modules
CS_BI_BOM_CREATE_BATCH_INPUT - Create BOM Via Batch Input
CS_BI_BOM_CREATE_BATCH_INPUT1 - Create BOM Via Batch Input (Corrected Session Handling)
There are two BAPI's too, which can be used
ALE_MATERIAL_BOM_GROUP_CREATE
BAPI_MATERIAL_BOM_GROUP_CREATE - Creation of a material BOM group
Hoe this helps.
Edited by: Priyabrata Samanta on Feb 15, 2008 3:56 AM

Is there any value for free storage requirements to SQL Server 2K8 R2 to run?

Similar Messages

Maybe you are looking for