Is there any way by which I can not use Thunar Sys Tray icon?

I am using stalonetray in OpenBox in Arch and when I copy-paste or cut-paste files in Thunar, a sys tray icon pops up. I don't want it to pop up.
Is there any way by which I can make it to not pop up?

Trilby wrote:
I haven't used thunar for a while - but I don't remember it ever doing this before.  I just verified that it doesn't here (freshly installed thunar, and cut-pasted, copy-pasted, etc, and I didn't get a tray icon.
Are you sure this isn't some other tool, like a clipboard manager?  Are their any tooltip popups or menus available on the tray icon and/or what happens when you click the icon?
No. I use only Thunar. When I hover on the icon it says that "1 file operation running" when a copy-paste or cut-paste operation happens and when I left click and right click on it, it shows the copying window of thunar. The icon shows two small yellow folders placed diagonally. It's the same icon that appears on the file operation progress window of Thunar. I don't know whether Numix has anything to do with the specific icon though.
Last edited by chosentorture (2015-01-11 00:13:32)

Similar Messages

  • Is there any way through which I can stop download of my ABAP programs???

    Dear all,
    I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
    Thanks in Advance
    Sachin Gautam

    Hi again,
    1. In that case we cannot do much.
    2. However,
       we can use
       the exit
       SEUED001
      (fm is EXIT_SAPLS38E_001)
      to restrict the program
      in edit mode,display mode
      etc etc.
      depending upon the PROGRAM NAME.
    I hope that serves your purpose.
    regards,
    amit m.

  • TS3694 I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better

    I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better way?

    No, downgrading from any version of iOS to an earlier version is not supported.

  • ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory

    ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory .

    You can check out Tomcat memory usage using Tomcat Manger
    and clicking server status.
    It gives the information like this
    Free memory: 489.80 MB Total memory: 508.12 MB Max memory: 1016.12 MB
    For specific application stats, i think there are some profilers which u have to search in google.

  • Because I have imported from a number of different sources into Aperture (3.2) over the years, I now have many duplicates in my library.  Is there any way in which these can be identified and lated deleted?

    Because I have imported photos from a number of different sources into Aperture (3.2), I now have many unwanted duplicates.  Some of these are in the same "file/folder", others are not.  Additionally, some of the duplicates may have different file names.
    Can anyone advise me if there is a way of identifying such duplicates in Aperture so that I may later delete them?  If this cannot be achieved within Aperture 3, does anyone know of a proven second-party app?
    Before ending I should mention that I am reasonable competent on a computer but I am not in any way an expert.  (So simple answers would be appreciated if this is possible!)
    Hopefully yours,     Jeremy

    Jeremy -- I suggest making a complete separate copy of your Library and any Referenced Masters and keeping it for a year.  "Duplicate" is, to humans, relative rather than absolute.  My use of Duplicate Annihilator turned up many useful near duplicates, most of which I couldn't quickly distinguish.  With a complete copy nearby, you can be slightly aggressive in your pruning, knowing that should you turn up something in ten months that you need (as an example: the full-size color file for a black & white printed shot that you thought was based on a full-size color Master but which is not), you'll have it.
    IME, it was much more effective to get rid of things I didn't need, than to figure out which of several possible duplicates of an Image I did need.

  • Is there any default calendar which I can use on my form and report

    Hi All,
    Is there any default calendar which I can use on date field on my form and report.
    just by change its property like double click on date field and property calendar = yes
    or any other way.
    thanks
    mohan

    hi
    create a functions something like this.i hope it helps u.
    function call_calender ( f_dtm_set in date default sysdate ) return date is
    l_dtm  date;
    l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
    begin
    if
      not id_null ( l_list )
    then
      destroy_parameter_list ( l_list );
    end if;
    if
      trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
    then
      l_list := create_parameter_list ( 'CALL_CALENDER' );
      add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
    end if;
    copy ( null, 'global.calender_date' ); --> create a null global
    call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
    if
      not id_null ( l_list )
    then
      destroy_parameter_list ( l_list );
    end if;
    if
      name_in ( 'global.calender_date' ) is not null  --> if the global is not null, give the choosen item back
    then
      l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
    end if;
    erase ( 'global.calender_date' );
    return ( l_dtm );
    end;sarah

  • Is there a way in which i can check if my Iphone 4 is factory unlocked before upgrading

    Is there a way in which i can check if my Iphone 4 is factory unlocked before upgrading
    i have bought it outside of usa and its unlocked till now....will it lock if i upgrade
    i just wana get official word from apple that my iphone is factory unlocked how do i do that
    PLESE APPLE HELP US

    syed waqar wrote:
    if i send all the information to apple cant apple simly tell me that the phone is unlocked
    No. I've given you your answer. Buy from an un-official source, and you take your chances. And yes, if your phone was hacked to unlock it(common from un-official sources), it will be locked back to the carrier it was originally locked to if you update software or restore the phone.

  • Is there any way that a jframe can be made to be the size of the screen

    is there any way that a jframe can be made to be the size of the screen assuming that it adjusts to altering sizes and also resolutions.

    Reg_Dwight,
    Please start posting your questions into the correct forum. Your Swing related questions should be posted into the Swing forum. This is the second time I have asked you and about the third or fourth time you have been told this.
    Thanks for your co-operation.

  • Is there any way .? how can i see. what going on my code

    hi jdev experts,
    am using jdev 11.1.1.5.0 - adfbc
    i have a amimpl classes i want to see the each and every value of the row, while perform each and every for loop
    is there any way .? how can i see. what going on my code
    can anyone paste simple video link regards this?

    Hi,
    what about debugging ? Just set a break point and run the Debugger (the red run icon). Or you use logging http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part to print out for each row whats going on
    Frank

  • After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    Restoring the iPhone will reload its firmware.
    Plug the iPhone into (the current version of) iTunes on your computer.
    Let it sync.  Then choose "Restore" from the iPhone's summary page in iTunes.

  • Is there any way to get around having to use iDVD to burn DVD?

    Is there any way to get around having to use iDVD to export FCE to DVD?
    I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
    Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
    Chuck
    iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
    iMAC 1.25 GHz PowerPC G4   Mac OS X (10.3.1)  

    If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

  • Is there any way to generate Gantt chart by using oracle 9iDS?

    Is there any way to generate Gantt chart by using oracle 9i reports builder
    Can you please send me the link or more information on oracle 9iDS.
    Thanks

    Hi,
    Oracle9iDS itself doesn't support creating Gantt charts. The option oyu have is to use Oracle Graphics 6i, because there is no Graphics in 9i, and configure it to run with Oracle9i Forms. There exist a whitepaper at otn.oracle.com/products/forms that explains how to make Graphics 6i work with Forms 9i.
    Frank

  • Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails?

    Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails? Please help. Thanks!

    That exclamation mark is displayed when iPhoto cannot link to the original file.  First make sure you are running a "managed" library by checking iPhoto's Advanced preference pane to make sure the checkbox to copy files into the library during import is checked.
    Click to view full size
    If it is checked you can try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

    is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • Is there any way to access the thumbails-db, where finder stores its icons that are assigned to files?

    Is there any way to access the thumbails-db, where finder stores its icons that are assigned to files?
    Thats a SQLite-DB? Is it possible to access and export them? I´d like to use that Db to assign thumbs to files on my NAS.
    Thx!    

    Are the thumbnails & icons stored in the .DS_Store-File?
    When visible, how can I access the content stored in that file?

Maybe you are looking for

  • "open file in Photoshop" doesn't work any more.

    When I right clicked a picture in Lr (most recent version) and selected "open file in Ps (CC 2014)" Photoshop launched, but the image didn't show up. I tried several times, with Ps closed or open, but to no avail. Opening the file as a "smart object

  • Problem using jsp:forward in java script

    hi, when I use jsp forward tag inside java script i'm getting a problem that when the jsp is invoked it is getting forwarded to the page specified in the forward tag, without checking the if conditions. Following code may give you a better idea. <htm

  • Spacing in drop down menu

    I have made a drop down navigation menu in dreamweaver cs6 but I would like to shrink some of the spacing between the menu opinions. The places marked in red is what I would like to shrink so there is less space between the text and next navigation b

  • Cannot update ipod because it contains files in use by another application!

    I recently upgraded from a powerbook g4 to an imac 20" C2D. Ever since I put my 5th gen ipod onto it it will give me that error every time i connect it or try to update it. I've tried restoring it and that doesn't fix it. anyone seen this issue or ha

  • Crystal JRC 2.0 JDBC-OBDC Bridge Issue

    I have been using the Crystal JRC version 2.0 since it was released.  I have deployed JRC 2.0 in a WebLogic server that currently uses version Java 1.5.0_12 and utilizes the JDBC 3.0 API.  We have been asked to upgrade the Weblogic Server to the newe