Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyone

BaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect.

Similar Messages

  • My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections.  I've reset it to factory settings twice and its not clearing it.  Does anyone have any ideas??

    My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections.  I've reset it to factory settings twice and its not clearing it.  Does anyone have any ideas?? 

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I added a video to my website but it wont play the entire thing? Does anyone have any imput on this?

    I added a video to my website but when I save it and
    aynchronize it doesnt play the entire film. Does anyone have any
    imput on this?
    Thank you.
    D Sterlin

    Actually I just finished doing what you said and my video
    worked!
    Thank you so much for your help!
    It really was very kind of you.
    D Sterlin

  • Hi. I'm trying to upgrade my 3G iPad 1 software from 3.2.2 to 5.0.1. iTunes tells me to upgrade. It then backs up my iPad Ok but it won't 'restore'. Thus the upgrade fails. Does anyone have any suggestions please?

    Hi. I'm trying to upgrade my 3g iPad 1 software from 3.2.2 to 5.0.1.   iTunes tells me that I need to upgrade.  It then backs up my iPad OK. But then it won't 'restore' and the upgrade fails.
    Does anyone have any suggestions, please.
    Thanks - Dafyd

    The version of iTune for the Mac is not capable of running on an iPad.

  • HT201210 I am trying to restore factory settings on my old iphone 4 so i can do the trade in program but i keep getting error message 3014 and i have tried all trouble shooting tips and nothing is working does anyone have any advice?  Thank you

    I am trying to restore factory setting on my old iphone 4 so i can send it back to my wireless company for the trade in program.  I keep getting error message from apple 3014.  I have tried all troubleshooting tips and still get the error message.  Does anyone have any tips?  Thank you

    I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple

  • I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

    I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
    Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
    Thanks,
    Kevin

    I recommend you install nothing older than the Apple-firware 5770, about US$250.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone?

    I updated my 4s to ios7 and the phone is now completly dead. I tried to restore it with the new itunes but it won't restore. If you can't get the download be glad! Anyone have any ideas other than going out and buying a new Samsung phone? I don't really need a paper weight.

    No not jailbroken. After the update which took about 45 minutes. The phone went black. Dead. Wouldn't restart. Using the new itunes I tried to restore it. It went through the motions; the white Apple and progress bar appeared on the iphone screen. Then I got a message "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes." Then the phone went completly dead again. I Repeated the process and got the same results. Is there another way to restore the phone if it's dead, besides itunes?

  • I have an iPhone 5 and the camera won't focus. I don't know if there's anything that can be done. Does anyone have any suggestions?

    I have an iPhone 5 and the camera won't focus. I don't know if there's anything that can be done. Does anyone have any suggestions?

    Basic troubleshooting
    reset
    restore with backup
    then as new
    as required if still issues then it is possibly a hardware fault  suggest you take iPhone to an Apple Store genius bar

  • HT4859 does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!

    does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • Hi there.  I just bought a new iMac.  Used to have a pc.  Plugged my nano into iMac and it transferred my purchases fine.  Bought a new album on i tunes and it will not download to my nano.  Does anyone have any suggestions?  Much appreciated.  Thanks.

    Hi there.  I just bought a new iMac.  Used to have a pc.  Plugged my nano into iMac and it transferred my purchases fine.  Bought a new album on i tunes and it will not download to my nano.  Does anyone have any suggestions?  Much appreciated.  Thanks.

    You may not have the iPod's Music tab set up in iTunes, which is how you tell iTunes how to automatically sync your iPod.
    Select the iPod in iTunes.  There is a row of "tabs" (starting with Summary).  Click on Music there.
    To use automatic syncing, the checkbox for Sync Music is checked.  Below that, you can choose to sync Entire music library, if it fits.  Otherwise, you can choose to sync Select playlists, artists, albums, and genres.
    With the latter choice, you can create a selection of songs to sync to the iPod by selecting (checkmarking) playlists, artists, albums, and/or genres on the Music tab.  For example, you can make a playlist in iTunes with all the songs you want on the iPod.  That new album needs to be on that playlist, if you want those songs synced to the iPod.  On the Music tab, checkmark that playlist.
    When you Apply the change, your selection of songs sync to the iPod (replacing its existing content). Going forward, any changes in the iTunes Music library that are related to your selection of songs on the Music tab sync automatically to the iPod when you connect it, or when you click Sync.
    Therefore, if you create a playlist with songs you want on the iPod, and select it on the iPod's Music tab, you can simply update that playlist in iTunes (add and remove songs), and those changes sync to the iPod automatically at the next opportunity.

  • I can't open any attachments on gmail, does anyone have any suggestions as to how to fix?

    I can't seem to open up any attachments in gmail.   Does anyone have any suggestions as to how to fix?   Thank you

    Hello Jim,
    Thank you for providing the details of the issue you are experiencing with opening attachments in Mail on your iPad.
    I recommend following these steps for an issue like this (you can skip 4 because it does not relate to the issue you are experiencing and any other steps you may have taken):
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPad before performing the restore:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I can not get NETFLIX to work, does anyone have any suggestions.

    can not get NETFLIX to work, does anyone have any suggestions...
    I have downloaded and installed Silverlight..
    and uninstalled it and reinstalled it...
    I have called Microsoft and also called Netflix support..
    who advised me to call Microsoft.
    Microsoft advised to to call apple
    seriously?
    HELP!

    Have you tried a different web browser like Mozilla FireFox?
    Have you tried just restating your Mac?

  • After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

    After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

    Welcome to the Apple Community.
    Which OS are you using.

  • My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. Does anyone have any idea what could be wrong and how I could fix it? Thank you.

    My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
    My main confusion is why this suddenly happened today when it was perfectly fine last week.
    Does anyone have any idea what could be wrong and how I could fix it? Thank you.
    Jinxe

    Welcome to the Apple Support Communities
    See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801

Maybe you are looking for

  • Lens (Tamron 18-270) not available in Lens correction menu

    Hi all, I only see some lenses to pick from in the lens correction menu. According to a list on the Adobe website, my lens (Tamron 18-270) should be included, but it is not. I am using Lightroom 5 on a Win PC and a Sony Alpha 58 camera. Photos made a

  • PO without material number

    Hi All, I want to understand one thing in procurement of an item without a material master record. When an item is purchased without a material master record using the material grp and account assignment in the PO does it make any difference to the i

  • Can't enable root access in Lion 10.7.2

    Hi all, I have read this Apple article on enabling root in Lion. It doesn't work for me. I did a fresh install of Lion 10.7.2 to a formatted drive from a USB thumbdrive. I ran Software Update until there were no more updates. When I open the "Directo

  • Bookmark missing after updating to Firefox 31

    Hi there! All my book marks & history setting are gone when I did my update to Firefox 31. Tried to restore from the auto bookmark backup but is prompt with "Unable to process the backup file." Tried downloading the Place Maintenance as suggested but

  • -ve sign in front without converting

    Hi experts, The negative sign of a currency field is being displayed at the end of the value I want it at the left, i.e at the begining of the value <b>without converting it to a character type..</b> i am aware of that FM :  CLOI_PUT_SIGN_IN_FRONT bu