Is there any way or prog for joining up an album so its 1 continous track?

Hi folks,
I listen to dance music and my ipod would be alot better orginized if i could "join up" some off my albums so that they were all 1 continous track ...
Some1 told me you can do this in iTunes itself, can any 1 comment on that ?
If ya cant, do ya no any prgram or method off acheiving this ??
Any help much appreciated peeps
Thanx !!!!
Dell Dimension 3100 Windows XP

Take a look at http://docs.info.apple.com/article.html?artnum=93624
Follow the instructions regarding sorting tracks in ascending order.

Similar Messages

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

Have you been having some problems that make you think you may have malware installed?
Download and run Etrecheck. Copy and paste the results into your reply. Etrecheck is a diagnostic tool that was developed by one of the most respected users here (and recommended by Apple Support personnel) in the ASC to help identify the more obvious culprits that can adversely affect a Mac's performance.

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Check the drive health with the free demo of SMART Utility.
http://www.volitans-software.com/smart_utility.php
Reformatting and zeroing out might keep a drive going a bit longer, but once bad blocks become noticeable, it's not a drive you should trust any longer.

Is there any free WinRAR prog for X6? bec it was h...

is there any free WinRAR prog for X6? bec it was hell enough to get WinZIP
if anyone got links pls help me
many thanks y'all

Look at this:
/t5/Phone-Applications/X6-how-come-there-is-no-WinZIP-and-is-WinRAR-complatible-with-it/m-p/744832#M...
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Is there any way to access the thumbails-db, where finder stores its icons that are assigned to files?

Is there any way to access the thumbails-db, where finder stores its icons that are assigned to files?
Thats a SQLite-DB? Is it possible to access and export them? I´d like to use that Db to assign thumbs to files on my NAS.
Thx!

Are the thumbnails & icons stored in the .DS_Store-File?
When visible, how can I access the content stored in that file?

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT

Is there any way to listen for OS-commands like LINUX/UNIX "kill myApp"?

Hello, world! ;)
I would like to get help on the following problem:
Situation:*
Implementing my first server-daemon I was wondering if there is any way to listen for OS commands/events affecting the application.
One particular handling I intend to implement is after an OS termination command (like *"kill myDaemon.jar"* on LINUX/UNIX) to shut down the daemon.
This would be really helpful, because in this way I would not just shut down the daemon brutally but being able to handle an event like this to shutdown the Thread pool, send all connected peers that the server/daemon will be down for a while, close all connections ...
Need help:*
Am I completely forgetting something which solves this problem really quick? :D
Is there any Listener Interface which I can use to achieve this?
Is maybe the JVM/JRE handling this and running garbage collectors?
Is there any site/tutorial/... focusing on problems like this?
Thanks in advance for any help on this subject!
JAVAnetic

Thanks, this was indeed very helpful.
I implemented a shutdownHook and it works like I hoped it would:
    Runtime.getRuntime().addShutdownHook(new Thread(new Runnable() {
      @Override public void run() {
        // shut down commands
    }));After typing *"kill process_ID"* in a terminal the shutdownHook is invoked (like mentioned before) and the shut down commands are executed.
Works fine.
Am happy. :D

Is there any way to wait for a value without using JDialog or JOptionPane?

I am implementing a dictionary program by detecting word in a JTextPane and asking a user to choose one of available meanings from JOptionPane or JDialog. The program runs under a while-loop until all dictionary words are detected or a user clicks cancel.
However, I don't want to use JDialog or JOptionPane because it is sometimes annoying to have a popup window on every detected dictionary word.
So, I use JList with Buttons on the same Frame as the JTextPane. However, now, the program does not stop when it detects a dictionary word. It just uses a default value of the JList for translating word to meaning.
Is there any way I can simulate the JDialog or JOptionPane without using it?
I mean I'd like to stopp the program temporary, wait for an answer from other components, and then continue to detect the next dictionary word.
Thank you.

I'm probably reading this all wrong, but instead of the while loop,
the method just looked for a dictionary word from a particular caretPosition,
so, to start, it would be findWord(0)
when found, add whatever to wherever, note the caretPostion at the end of the 'found' word, and method returns.
when the user selects whatever button, the button's actionListener also calls the method again, using the noted caretPosition
findWord(42);
so, it starts searching from 42 (instead of the start)
basically it is event driven
findWord sets the button/s
click a button starts findWord

Is there any way to delete information on my iPhone without the Lost iPhone Tracker App?

I recently lost my iPhone 4. I had no password lock and did not have the lost phone app. Is there any way to track my phone or erase the information?

Welcome to the Apple Community.
Unfortunately not.

Is there any way in Firefox for android to use native handlers?

In Firefox for windows or Linux, I can register a URL handler (e.g. mailto:) but android takes this to a new level with intents which can register responders for individual URIs as well as for and mine types.
Are there any plans to natively support android intents (e.g. to handle a transition from twitter.com to the native twitter app), or perhaps an add-on to support something similar? I have already found https://addons.mozilla.org/en-US/android/addon/open-native-app/ but it's a manual process, rather than an automatic one.

http is a website, Firefox browses websites. We are not planning on kicking people to the native app for such things. We do support loading resources that list helper apps. For example if you load a Google Maps page there is an Android icon in the address bar that will take that page info and pass it to the Google Maps app.

Is there any way to register for changes in a NetworkInterface?

Greetings. I'm interested to know if there's a way to register for changes to a NetworkInterface. Changes could include ifup/ifdown, a change in the displayable name, adding/removing InterfaceAddress or InetAddress, or even a change in the hardware address. It doesn't look like it but I thought I'd check.
Thanks. Jerry.

The latest version of software for your iPod is shown in the iPod's Summary screen in iTunes. If an update is available, notification will be there. If it says "Your iPod software is up to date," you have the latest software.

Is there any way to get back a note you had if its been deleted?

I have been keeping a journal of my little boy's everyday changes since the day he was born under the notes app. Recently I was typing and hit the trash button. It is gone. Is there any possible way to get it back? 20 months of memories :-(

If it is backed up, yes,
If not, no.
Allan

HT204266 I purchased a navigational app yesterday and it is not what I was wanting. Is there any way to get a refund from a purchase if its been less that 24 hours. This app was $50.00!!!

I purchased a naviational app yesterday and it is not what I was wanting. Is there a way to get
a refund if it's less that 24 hours ago? The app was $50.00

Purchases are considered final, but you can try the 'report a problem' page to contact iTunes Support and see if they will credit or refund you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Is there Any way to pay for faster Upload for DSL?

Keep in mind that I'm ignorant to the way these things work so if it's not possible for a technical reason then I wouldn't know. So yeah, the question, is it possible? 768kbps up is just too slow for me when I upload a lot of gaming HD videos on youtube. For 1080p at 8,100 kbps (cut down from 13,500 bitrate which yube doesn't even process it would seem) I get a file size of 900MB. I tracked the upload speed several times and I get up 300MB in 1 hour. Some can't even do that so I'm really not complaining I just want to go faster. Anyway, so a 900MB file takes 3 hours. If you're uploading a playthrough it takes a couple weeks. Sure cutting the bitrate to 5,000 and dimensions to 1280 x 720 will save 1 hour but it's still a long time. Okay I'm rambling here.
Solved!
Go to Solution.

Whether you can get more speed than you have today depends upon two things.
1). Does Verizon have the Central Office Capacity upstream.
2). How good (or bad) is the copper pair that connects you to the Central Office.
Item 1 there really isn't anyway to know about.
Item 2 you can establish by looking at your Tranceiver Statistics. You can get them by connecting to your Modem/Router (http://192.168.1.1 ) and loging in as the administrator. If you post those stats, there are people here who can tell you exactly what your copper pair should be capable of. The quality of the pair is a fuction of both the age of the cabling, and the wireline distance between you and the Central Office.
If your line can support a higher data rate, and Verizon has the backhaul capacity in the Central Office, Verizon will be very happy to sell you faster service.
If the pair is good enough, you might be able to actually get 7+ mbps on the downlink, but that generally requires a pretty short copper pair (under a mile), and cabling that isn't a lot older than you are.
The ultimate solution to this problem is to hope that FiOS is coming to you neighborhood soon. FiOS speeds leave DSL in the dust.

Is there any way or prog for joining up an album so its 1 continous track?

Similar Messages

Maybe you are looking for