Is there Any way to All Calender?

Is there any way in Developer 6i that To Insert Or Add a Calender Control in Developer Form
If yes then what or how?
Thanks.

See
http://www.oracle.com/technology/sample_code/products/forms/6idemos.html
Also the 6i demo may come with a calendar that doesn't use a PJC. If not, there is a demo package in 10g that doesn't use a JPC that will probably work with 6i but may need to be modified.

Similar Messages

HT204048 Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.

Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.

Not using Boot Camp, but you should be able to using virtualization software such as Parallels to run Windows concurrently with OS X.

IS there any way at all to get video out on nano?

Is there any way AT ALL to get video out from the nano?
Meaning hax and 3rd party equiptment is okay!
I just need to be able to do this.
thanks~vin

Nope, it will void your warrenty, and will brick your iPod. I did it, and made a paperweight from it.

My screen smashed so had to get a new phone, my phone hadn't been backed up since march is there ANY way at all I could retrieve my pictures and/or videos? from all of my holidays :( please any help would be much appreciated! Thanks

my screen smashed so had to get a new phone, my phone hadn't been backed up since march is there ANY way at all I could retrieve my pictures and/or videos? from all of my holidays please any help would be much appreciated! Thanks

Strawbs12345 wrote:
Yeah but I can't upload them because there not on the phone?
Is that a question?
Photo stream pictures can be viewed only on the devices they were sent to. You can't transfer them back to your phone (or anywhere else). If you didn't back up or import the photos to a computer, and they are no longer on your phone, they're gone.

I took a 6 minute video and it's too grainy. Is there any way at all to reduce the grain? Or am I out of luck?

I took a 6 minute video and it's too grainy. Is there any way at all to reduce the grain? Or am I out of luck?

Yes, you have lots of alternatives.
1. Got to somewhere like Google docs and create a comment and feedback form, that can be inserted onto your site via the html snippet. You can also take a look at http://www.jotform.com. Whenever someone completes the form, you will be e-mailed with all the info.
2. Use a comment system like http://www.intensedebate.com. Very good and the comments will be displayed on your site and you will be e-mailed when someone comments and you are able to accept it or reject it in this way.
3. Go and create a blog elsewhere, like http://wordpress.com or if you have hosting, then try http://wordpress.org. You can load this on your server with no problem and then create comments here, so in your iWeb site you either create a link to your blog or you can display your blog as an iframe in your iWeb site using iframe code.
4. As far as hit counters go - there are many. Just do a Google search for hit counters - http://www.hitcounterexpert.com and there are hundreds more.
Perhaps Apple keep blog comments and hit counter as MobileMe only to encourage people to use MobileMe rather than external servers. However, we can only speculate on that!

Is there any way at all of accessing captivate variables from flash?

Hi,
I would be grateful for any help on this one. I have been working in flash and I wanted to know whether there is any way at all of calling/accessing captivate 4 variables from flash (I'm working in flash Cs4 Actionscript 3.0 and I'm trialling Captivate 4, but I just want to know whether there is any way/method of communicating between a flash file and a captivate 4 file, and if so, can this be done with an embedded captivate 4 file/swf). Surely there must be a way of communicating between the two - they are both Adobe products!
Thanks for any help, pointers, advice, tips in advance.

Hi Louon,
Don't know if this would help you.
http://blogs.adobe.com/captivate/2009/09/captivate_variables_-_how_to_a.html
We have many experts here who could give more precise answers.
Cheers.
Miguel

Is there any way, at all, to play video with H.264 source in Firefox?

I am a developer working on a site that makes heavy use of video. The site navigation and video playback controls run together, so it's important for me to be able to have full control over the videos, however, the videos must be hosted on Vimeo. The information on Firefox support for H.264 is all over the map, though at this point, I am just assuming, for the sake of practicality, that Firefox doesn't support H.264 playback at all. If I can't find a good solution, we are simply going to draw the line at Firefox and not support the browser at all for this site. It would be nice for the site to work on Firefox, but we estimate that less than 6% of our viewers will be using the browser, so it won't be hard to just redirect them to a different browser. Is there any hack, any workaround, anything at all, that I can do to play H.264 video using just the good old standard <video> tag?

hello mattclough, due to patent and licensing issues support for h.264 is not directly built into the browser, instead firefox relies of the capabilities of the operating system or hardware to playback such media content.
this will work in windows vista/7/8, linux, android and firefox os devices - for details please refer to https://developer.mozilla.org/en-US/docs/Web/HTML/Supported_media_formats

Is there any way reset all tracks to the beginning?

I don't want to turn off the option to remember playback position as I listen mostly to audiobooks and want to keep my place. However, there are times I want to reset every track back at the start. Is there a way to do that?

I haven't tried this myself... but I to listen to audiobooks alot on my iPod. As Chris already mentioned, the settings for remembering location is set for each track, not all tracks as a whole. You might be able to do a reset by selecting all the audiobooks in your library then going to "get info" and unchecking the remember position box.. then go back once it's updated and check it again. It would seem that by telling iTunes not to remember anymore it would erase the position memory, then you go back and tell it to remember again... it should start back from the beginning. Personally I just do it one at a time. If I started playing the wrong track or want to start over, I just hold down the reverse button when it starts playing and it goes back to the beginning.

My daughters Ipod was stolen. Is there any way at all to track it?

My daughters Ipod was stolen while at school. How can I track the device in order to get it back??

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Is there any way at all to do a "left tab" on an iPad? I'd like to do this with a blue tooth keyboard. Is there a buetooth keyboard available that will provide the option of performing a left tab on an iPad?

I'm looking for a way to use the "left tab" option on my iPad. Does anyone know of a way to do this? I'd really like to do it with a wireless bluetooth keyboard that I am using with the iPad. Is tehre a keyboard available that will give me this option?

Welcome to the Apple Support Communities
Microsoft will launch Office for iOS next year, so you have to wait, Instead of Outlook, use Mail on the iPad

Is there any way at all to upgrade from os x 10.4.11 powerPC to 10.5 in order to sync IPAD 2 and IPhone 4

how to upgrade from 10.4.11 to 10.5 with a PowerPC

Leopard minimum reqirements:
http://support.apple.com/kb/HT3759
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
You're welcome

Is there any way to get iCloud sync (iPhone + 2 Macs) without wi-fi?

We have two Macs (MacBook Pro, iMac) and one iPhone 4; OSs up-to-date (Lion, iOS5). Our only routine access to the internet is via the mobile phone 3G network for the iPhone, and via a 3G USB stick/dongle for the Macs, also using the mobile phone network. We do NOT have access to the internet via a local wi-fi link to a router (whether ADSL or cable). This is in Melbourne, Australia, btw.
Question: is there any way at all that we can get syncing of contacts and calendars for all three devices? - preferably automatic, ideally real-time whenever a device could see the internet. With syncing set, there seem to be some random updates (and duplication) between devices, but it seems that normally syncing is enabled only when the device sees the internet via a local wi-fi link to a router, and that's what we don't have. (We can't trundle the iMac to an internet cafe either!)
Understood that a local sync would be possible via iTunes for one of the two computers and the iPhone, provided they could see each other wirelessly - but there's a second computer...
E-mail no problem; we use IMAP.
All suggestions gratefully received!

Thanks for this quick response.
I thought I had established by searching forums that iCloud sync routinely requires wi-fi. I can see from Apple documentation that backup does; and that Documents and Data (in iOS) has a switch to permit/deny syncing using a cellular network. What I have not found is a one-stop-shop on the Apple site that says which iCloud facilities are supposed to work with cellular/3G networks and which not. Can you point us to such a list?
Regarding our own problem: the missing link appears to be the download of new entries from the cloud to either of the Macs, the Mac being connected to the internet via 3G. For example a new calendar appointment entered on the Mac duly appears on the iPhone; but a new appointment entered on the iPhone fails to appear on the Mac. (If it is re-entered on the Mac, it gets duplicated on the iPhone.) Checking the iCloud website show that a new iPhone appointment is getting as far as the cloud; but apparently no further.
I think you'll agree that this makes iCloud calendar syncing next to useless.
This may not (as you imply) be caused by the use of the 3G connection. However in the two households in our family we have one with wi-fi and essentially the same setup, except that the iPhone is a 3GS. In the wi-fi setup, a new appointment entered on the iPhone calendar promptly shows up on a Mac.
If the sync problem has nothing to do with the mode of internet connection, how might it be cured?

Recently forced to update Macbook Pro (Mid 2012) from Mountain Lion to Yosemite. Performance is awful. Is there any way to change back/downgrade?

(Sorry if this isn't the correct category)
I have always been a fan of Apple and almost always love Firmware updates. OS X 10.9 and 10.10, however, I do not like.
I recently spent a lot of time going through all the troubleshooting steps Apple Support makes you go through before I called them to get my problems fixed as quickly as possible (no point wasting both our time). I had encountered scepticism in the past that maybe my problems were because I was running 10.8 and so to prove that it was in fact a hardware problem, I updated. AppleCare finally agreed to replace my logic board (for a second time) which fixed the performance problems I was having. The process took hours and I ended up being right the entire time.
I originally had my own little reasons for not wanting to update but decided I would try Yosemite since I didn't really have much of a choice at this point. I have now given it a good month and have concluded that this OS version is completely useless to me and near unusable.
A small list of the more annoying problems:
Photoshop crashes and/or needs restarting constantly
my Wacom Tablet doesn't function properly (or at all
my computer lags when I open Dashboard or App Exposé
I get the spinning beach ball for a good five seconds at times almost exclusively when using a feature of my computer such as Finder, Pages, iTunes, etc.
computer feels like it is lacking in specs
Additionally, there are a dozen little things about the way Yosemite behaves and looks that I find hard to ignore. I WOULD ignore these things if my software worked properly.
Yes, I did try reinstalling programs and drivers; no it didn't help.
I paid for a computer running Mountain Lion because I knew I could do my art on it, play the games I wanted, and do word processing the way I liked. Is there any way at all (no matter how long or difficult a process) to downgrade back to 10.8? And specifically without voiding my warranty?
I really don't want to be forced back to buying Windows but I spent a lot of money on something that is now not functioning in a way I can use it ):
TL;DR
had 10.8. needed to update to 10.10 so AppleCare would believe that I had hardware problems. Hardware is now replaced and I need 10.8 back without voiding my warranty.

GrandMasterB wrote:
My problem is the laptop came with Mountain Lion on it and I spent 2.5 DAYS in recovery trying to redownload the OS to install.
snip
That took about an hour and after the recovery finally opened I was prompted with downloading "Lion" instead of "Mountain Lion" I proceeded. It installed overnight. Now my Macbook has Lion on it and the only way to get Mountain Lion back is in the App Store for $20....
This does not make much sense if the Laptop had Mountain Lion on it from new. Internet Recovery downloads the current version of the OS that the machine was built with, are you sure that you did not upgrade to ML from Lion?
If you did you can redownload Mountain Lion for no charge.

Is there any way to create objects in jstl even if its not a java bean

please someone help me :<(
thx in advance for the time you'll spend on my question.
i am translating some code in jsp with embedded java to jstl. and in scriptlets they created java object of some class and using it in loop. but that class is not bean, so i can't use <jsp:useBean> tag so how do i do that here is the code
<% TabLayoutConfiguratorImpl tabsConfigurator = new TabLayoutConfiguratorImpl();
%>
<logic:iterate id="tab" name="tabList" type="TabItem" >
<% // compute href
if (!tabsConfigurator.isHidden(tab))
-----statements-----
%>
</logic:iterate>
how can i create TabLayoutConfiguratorImpl class object and use everything should be done in jstl? is there any way at all?
here is my class
package conf;
import javax.servlet.http.*;
import org.apache.struts.tiles.ComponentContext;
public class TabLayoutConfiguratorImpl implements TabLayoutConfigurator
public void configure(HttpServletRequest request) {
HttpSession session = request.getSession();
ComponentContext context = ComponentContext.getContext(request);
this.configureDefinition(context);
java.util.Iterator i = ((java.util.List) context.getAttribute("tabList")).iterator();
while (i.hasNext())
TabItem tab = (TabItem) i.next();
this.configureTab(tab, session);
// subclasses should override this if there the attributes in the Definition
// need to be manipulated
protected void configureDefinition(ComponentContext context)
// default implementation does nothing
// subclasses should override this if tabs in the definition
// need to be manipulated
protected void configureTab(TabItem tab, HttpSession session)
// default implementation does nothing
// subclasses should override this if they want to hide tabs in the
// configuration
public boolean isHidden(TabItem tab)
// default implementation returns false - ie they are visible
return false;
}

I don't see what is wrong with
<jsp:useBean id="tabsConfigurator" class="com.mypackage.TabLayoutConfiguratorImpl"/>
The class has a no-args constructor at least. The useBean tag will work with it. Probably.
But still, some code just can't be translated into scriptless JSTL.
Calling methods which take parameters is one of those things.
In this case you probably want to write a custom tag to work with your tabs
I would probably look at using custom tags like this:
<%@ taglib prefix="tab" uri="/WEB-INF/TabLayout.tld"%>
// tab to create the configurator.
// either export it as a var, or use other tags only nested within this one
// so you can get access to the configurator.
<tab:configure var="configurator">
<tab:render configurator="${configurator}" tab="${tab}">
</tab:configure>I don't know exactly what the scriptlet code will be doing. But I think a custom taglib would be the only way to eliminate scriptlet code that you have here.

Is there any way to manage multiple CC memberships from a single account?

Is there any way for all our CC accounts to be managed by a single account, to manage things such as billing, etc? It would save my company time and confusion when we have to do things such as set up a new credit card number (which we would have to do to every single account). Thanks, Mike

Team license links that may help
-http://www.adobe.com/creativecloud/buy/business.html
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0

Is there Any way to All Calender?

Similar Messages

Maybe you are looking for