Is there any way to allocate a particular asset to more than one cost centr

Hi all,
I would like to know the posting of an asset to more than one cost center,
is there any particular setting to configure this,
or,
please suggest me how to go about,
regards,
naga suman

Hi Naga,
Not sure exactly what you are talking about but if you are talking about depreciation charges to more than one cost center then it is not possible. Asset is only assigned to one cost center on a particular date. However that cost center can be changed as it is time dependent field. So one month you could post the depreciation to cost center A and next month to cost center B.
One way to get postings to various cost centers would be to use distribution in CO to accomplish your goal. You would then post the depreciation as per normal to one cost center in the depreciation run. Then you would set up distribution rules for that cost center and relevant Depreciation Cost Elements to distribute it to other cost centers. By doing this the asset would always show depreciation against 1 cost center but the distribution would allocate relevant cost between other cost centers.
Hope this helps,
Cheers,
Gudmundur

Similar Messages

Is there any way to download iTunes LP files to more than one computer?

From what I can tell, iTunes LP files are like the old way of doing things before iTunes in the cloud: one download and you are done. Can anyone conform or deny this?
If only one download is allowed, is it easy to simply transfer the files from one computer to another?

Just to be clear...
As applenerd504 states, iTunes cannot be downloaded onto a Niokia phone, since it is a computer programme, designed to work on either a Mac or a Windows PC.
However, if you mean songs purchased from the iTunes Store (songs), then you need to consult the documentation for your Nokia. Songs purchased from the iTunes Store are in .m4a format (also known as AAC). If your Nokia cannot play .m4a files, then you will need to use iTunes (the programme) to create an MP3 version.

Is there any way to identify the particular socket connection is closed ?

Is there any way to identify the particular socket connection is closed or not ?
Any methods ???
How can the program knows the connection is lost or some thing ...
Is the socket throws some excpetions when there is no active connection ???
namanc

If you get an IOException when you try to use the socket, the connection was obviously closed.
The correct way for an application to know if the socket was closed is:
1) the server sends a message indicating that the socket should be closed
2) the client closes the socket itself

Is there any way I can upgrade to version 6 rather than IOS7?

Is there any way I can upgrade to version 6 rather than IOS7?

No. iTunes and over the air updates work by detecting your hardware, and then only offer the latest available version of iOS compatible with that hardware. Older releases will simply not be available for hardware.

Is there any way to disable Home Sharing on all computers at one time? I've put Home Sharing on 5 computers already, and I don't have one of the computers anymore.

Is there any way to disable Home Sharing on all computers at one time? I've put Home Sharing on 5 computers already, and I don't have one of the computers anymore.

nm
Copy/Pasted:
You can deauthorize all computers connected to your Apple ID if you've reached the maximum five authorizations:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
EE

HT202299 Is there a way to automatically upload videos that last more than 5 minutes on icloud ?

I saw that icloud has a limitation of 5 minutes on the videos :
Is there a way to automatically upload videos that last more than 5 minutes from iphoto/photos ?
I'm trying to find a way to store my photo library on the cloud, AND keep to acces to each photos/videos from the net (not just storing the .iphotolibrary on the icloud folder) but i cant do it for the videos of more than 5min ...

I believe you are probably referring to iCloud photo sharing. If you wait a while, the next version of Yosemite will include the new Photos application which will sync video through the iCloud photo library feature.

Is there any way to play all files in a directory by one url?

Hi all,
I am testing fms this days, I have put all my files(such as 1.mp3,2.mp3...n.mp3) in my directory.
I can play single file fine with url like this:
rtmp://localhost/mp3/mp3:x/2
but i want to know is there any way to play all files in my direcotry?
for example, user click the play button, the player(smp) automatic plays all files in the directory, link windows media server.
Should I use playlist? Or there is another better way?
Thanks a lot.

Hi,
FMS do not directly take a directory to play files, the file names have to be fetched some way (through script if needed) to make a playlist and then the play command needs to be repeated as many times.
Thank you !

Is there any way I can go back in history more steps than the history allows me at a given moment. Ex: if it's set on 50 steps, can I go back 56? In any way?

HI!
My history was set on 50 steps in Photoshop CC, since I never needed more than 50... Until yesterday, when my school asked to see all my work. Now I need to trace back all of my steps. Is there any way I can recover all of them? or at least a few more than 50?
The document I'm working in is still open.
Thank you for your help.
/Aura

Please please help me, if you know how.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Any Benefit to having User Profile Service on more than one server

I have an application that uses UPSA and UPSS, the User profile Service and Sync Service are started on the same server
Is there any point in having the User Profile Service started on a second server for redundancy.
I understand that a UP Sync Service can only be associalted with one User Profile Service Application
Can I make my User profile Service Fault tolerant by starting the service on more than one server?
I am not looking to create a second Use Profile Service Application to have seperate DB's and things
Just to have User Profile still avaialble when the serevr hosting it has an issue
thanks
themush

To get the round robin load balancing, just start the service in Services on Server on more than one server.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is there any way in Adobe Reader to limit printing to only one page at a time?

We have a large piece of internal knowhow in the form of a pdf document that we don't want users to be able to print in one go as it would risk the document leaving the premises. We are quite happy with users using print screen for single pages, but that doesn't really produce readable results.
So ideally we'd like users to be able to select print, but when they do it should only allow 'print current page' or just print the first chosen page instead of the whole selection. For instance, selecting pages 123 - 145 should only print page 123.
I've looked in to various areas already. We are delivering this document through a secured version of Adobe Reader via Citric application streaming, so are able to customise the config.js file any way we want, however I've looked through the Java Reference Guide and haven't been able to identify anything that might satisfy our requirement this.
I've also looked in to Document Actions such as "Document will print", but again (perhaps due to a personal lack of programming knowledge) am unable to find a way to fix the print option to a single page.
Any ideas/suggestions much appreciated.
Kind regards,
Kaan

The sponsor is not happy for low res printing either. As an organisation we should be looking at DRM more closely, and we've added to the requirement with this problem. We are also going to look in to the option of attaching metadata and scanning that at our exit points (e-mail, printers, usb's, etc.) so that users have free reign internally but can't send sensitive documents out. Obviously it's all going to be very expensive!
Cheers for the respones guys.

HT5449 In my iPad I can easily switch languages by hitting the world icon. I have it set up to switch betwee english and spanish. I can use both in one document. Is there any way to do this on the mAC other than go to system preferences?

When I am dictating on my ipad, I can switch back and forth between languages by clicking the world icon. On the MAC it seems as though I have to go to system preferences and switch language there. That is a little cumbersome, Is there a way of switching on the MAC?
Paul

System Preferences/Language & Text/Input Sources - Select the languages you want and then Show Input menu in menu bar. This allows you to switch back and forth from the menu bar.

Is there any way to specify the 32 bit jre rather than the 64 bit jre?

We have multiple apps that read native libraries, some of which are not yet available as 32 bit dlls. This has become an issue with the rising popularity of 64 bit Windows 7.
Is there any kind of workaround that will force a webstart to be run by the 32 bit jre if both the 32bit and 64 bit are loaded?

Welcome to the forum. Please don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
The question doesn't make sense anyway, 32bit isn't available, but 64bit dlls are?
I'm locking this thread now.

Okay, so my baby brother had put my iphone in microwave and now it turns on only on the charger, the screen will not work and the date and time has changed, is there any way it can be fixed or how much it would cost

okay so my brother had put my phone in microwave , it now only turns on on charger, the date and time cahnged, but it will not let me use the screen, is there anyway this can be fixed ?or how much it would cost.

I would very much doubt that. The radition level inside a microwave is termendous. I am totally flabbergasted that there is much of it is still that much working.
Allan

Is there a solution to reply with a template to more than one message at once?

Okay, I'm stuck. I was using MailTemplateEditor which allowed one to create a template message and select multiple emails with a "reply with..." command in Apple Mail. It was a great way to get a standard reply out to multiple emails/recipients in one step.
Is there ANY solution for Apple Mail 6 that can do the following:
allow you to select multiple emails and reply with a predefined message?
I don't want to go through individual emails, one at a time, and then use TextExpander to have my message added in the reply. It's a time-killer.
Any solutions out there?
Thanks for your time and consideration?

This might help:
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

Is there any way to allocate a particular asset to more than one cost centr

Similar Messages

Maybe you are looking for