Is there any way to attach an action to the current tab bar you are in? If so, how?

Is there any way to attach an action to the current tab bar you are in? If so, how ?
I am using storyboards.
Cheers

Jeff:
Look at Cyclosaurus' post in this topic: http://discussions.apple.com/thread.jspa?messageID=9273769#9273769. It may address what you're wanting to accomplish.
OT

Similar Messages

HT201342 Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Thx Winston,
I can count the send item. But let me try to explain why did I ask this question.
I had a trouble in sending e-mails from icloud on 22/2 and when I saw in my send item there were no emails.
But the mesgs to whom I emailed received and out of which only few of them didn't got the email. So I wanted to know the log abt the outflow of the mesg with subject and the receipants email id and the list with attachment or not.
How and where will I get the information apart from send item and draft mesg and the outflow undelivered?
Regards
Sarfaraz

Need help with a calculated column - is there any way to reference a value in the current row?

Hey guys,
I'm a bit of a DAX newbie, and I'm running into a block. I'm creating a Power View report about IT tickets. We are going to be creating a cube to automate the data soon, I'm currently working with a flat Excel Data Table of data to demonstrate the Power
View reporting capabilities to the team. I need the default display to show the top 4-5 items basked on the Ticket Count. The three applicable columns I'm using are the TicketID, the ContactReason, and the AssetCategory - all three are
text. One slide will show the top five Contact Reasons by Ticket Count, and the other will show the top five Categories by Ticket Count. The users will see this default view, but will be able to change it to see differently ranked items or can clear the
ranking slicer altogether.
What I've accomplished so far is to create the Calculated Field [Ticket Count] = COUNTA(Table1[TicketID])
And 2 other calculated fields:
[Contact Rank] = RANKX(ALL(Table1[ContactReason]),[Ticket Count],,,DENSE)
[Asset Rank] = RANKX(ALL(Table1[AssetCategory]),[Ticket Count],,,DENSE)
If I were creating a Pivot Table, this would be great. These fields calculate everything the right way. The problem is, I need to have a Rank slicer on each slide and the calculation by itself contains no data - with no data, there's nothing to slice. I
realized I need to actually have columns of data so I can create a slicer. I need each row of the table to show the same [Contact Rank] for every instance of a particular ContactReason (and the same for the [Asset Rank] and AssetCategory).
The RANKX formulas pasted into the Calculated Column section only show a value of 1 - with no Pivot table summarizing the fields, it's counting each row's ticket once, giving every line the tied Rank of #1.
I've solved the problem in Excel by creating 2 Pivot Tables on a separate sheet that have the data field and the calculated field for ContactRason and AssetCategory. Then on my Excel Data Table, I've added two columns that do a VLOOKUP and pull over a the
Calculated Rank from each Pivot Table that match the ContactReason and AssetCategory fields. This works on the flat Excel Data Table now, but will not be a solutions when we start pulling the data from the cube (and there is no flat table).
What I think I need is an Expression for the RANKX formula that can give me, for each row, the count of all of the times a ContactReason shows up in an entire column. There's only about 100,000 lines of data and each ContactReason or AssetCategory
may show up several thousand times. But if I can get the expression to return that count, then the RANKX formula should work in the Column. If it wasn't a DAX formula, I'd use a COUNTIF and say 'Count the entire ContactReason column anytime it's equal to the
ContactReason on THIS row', but in DAX I don't know how to reference a single value in a row. I've tried the CALCULATE() formula, but it seems like the filter needs a specific value, and doesn't work on a dynamic "cell" value.
Any help would be greatly appreciated! (I hope it all makes sense!)

If I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

Is there any way to attach excel insted of XML?

Hi,
is there any way to attach excel insted of XML?. i need to fetch the values from the excel sheet directly to the fields in the form.
For Eg:
im having 5 fields named id,name, DOB,country,citizenship
if i enter the ID, the form should get autopopulate from excel sheet and to display the remaining valus name,dob,country,citizenship.
excel will look like this
thanks,
ramya

Hi Niall,
thanks for the reply, right now im attaching the xml in to the form using javascript. im having 5 fields
my xml looks like this.
what i need to do is, when i enter 001 in EID field, and enter tab, the other fields like name,sbg,sbu,sbe,country should autopopulate from the xml. plz help me..
regards,
ramya.

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in but not make purchases from the store so I set up a new login/account . Is there any way to move my music to the new account?

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Is there any way I can get rid of the noise my iPod makes when I plug it in to charge without turning the volume of the whole IPod (4th Generation) down?

I have a 4th generation IPod touch. Today I downloaded the new iOS 6.0.1 and I have a question. Is there any way I can get rid of the noise when I plug it in to charge? I had it set that way before, and I can't seem to figure out how I did it. I found when I turned down the over all volume it gets rid of it, but I don't want to change the over all volume. Thanks so much for you help and Happy Holidays.

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
Thanks!

goldberry wrote:
Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

Yes, if you have iCloud set up on your phone and computer, then reminders will be synced through iCal.

Is there any way to buy tv shows from the uk iTunes when I live in Ireland?

is there any way to buy tv shows from the uk iTunes when I live in Ireland?

And according to iTunes / Help...
The iTunes Store may not be available in all countries or regions, and iTunes Store content may vary by country or region.

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced.

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

You should ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I need to transfer up to 200 pages and keynote files from my macbook to my PC. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as word-friendly?

I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

Tell me please, is there any way to unlock my iPhone, if the contract is ended and I moved to Ukraine

Tell me please, is there any way to unlock my iPhone, if the contract is ended and I moved to Ukraine

1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve the issue, backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Is there any way to attach an action to the current tab bar you are in? If so, how?

Similar Messages

Maybe you are looking for