Is there any way to bend, curve an Image in Motion?

Is there anyway to bend, curve an image in Motion or are we stuck in 2D space?
What I'm after is to bend, curve an image around a circle on the floor, not the whole circle but just part of it to get that curved look if that makes any sense.
I have searched everywhere and the only thing I found was a plugin from Zacwerks.
Thanks

This goes back a few years, but here's something I've posted on this question:
http://discussions.apple.com/message.jspa?messageID=4022889#4022889
Patrick

Similar Messages

  • Are there any way to recover the deleted images form iPhone 4

    hello guy's
    are there any way to recover the deleted images form iPhone 4
    note : i haven't make any copy of the photo in my pc so i relay need for them
    plz help

    The Camera Roll is for temporary storage as with any other digital camera. Although photos in the Camera Roll are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, photos in the Camera Roll can and should be imported by your computer ASAP. If you didn't sync your iPhone with iTunes since these photos were captured by your iPhone and the photos in the Camera Roll weren't imported by your computer, the photos are gone.
    Depending on how wealthy you are, you can contact a data recovery service to see if they can recover deleted photos from an iPhone's flash drive, but you will pay an arm and a leg for this. Such a data recovery service is not cheap and with no guarantee the data will be recoverable.

  • Are there any way to recover the deleted images form iPhone4

    hello guy's
    are there any way to recover the deleted images form iPhone 4
    note : i haven't make any copy of the photo in my pc so i relay need for them
    plz help

    What happened that you lost them?
    If you have synced recently you could restore the iPhone and it will restore the camera roll to it's state at the time of that sync.

  • There any way to open an 'offline' image if the originals are gone?

    I recently had pictures, 1827 of them, somehow get deleted off my computer, therefore it resulted in me not being able to do anything with them in Lightroom since they are now considered 'offline'... is there any way a person can somehow get these images off the lightroom program, so I can save them & still have access to them?

    First, are you really sure that your pictures ahve been deleted? You can only be sure when a thorough search in your OS (Mac Finder / Win Explorer) does not find them.
    The fact that LR sows them greyed-out and with question marks does not necessarily mean that the images are deleted.
    That LR is not able to find the images can have several reasons: 
    (a) worst case, the images are not on the hard drive at all.
    (b) the images are on the hard drive but in a different location. This happens when you move images / folders outside of LR.
    (c) images and/or folders have been renamed outside of LR.
    (d) a combination of (b) and (c).
    In case your images are truely deleted you can do a <Print to JPG file>. In the print Module on the right side in the <Print Job> panel besides the words <Print To> click on the small triangles besides <Printer> and select <Print to JPG file> that would save your image as a small jpg.

  • Is there any way that I can sort images by resolution?

    Hello
    Have you guys found out any way or apps can sort images by resolution?
    I've tried Path Finder and Forklift, neither of them can do it .
    For now, I'm doing this with winxp on a PD5...

    You can do this in Finder. If you cntrl+click on the saved search query folder for images you can add resolution (width and/or height). All Images> Show Search Criteria>click on the "+" sign click on the drop down list on the far left select other if you check the box to the right (In Menu) that criteria will show up in the list. I use 4 resolution criteria to eliminate small files when do a "random" search (greater than but less than). You can also save a new "smart folder" with the criteria.

  • I do not have Aperture installed on my computer anymore but I do have my old library.  Is there any way to extract the ORIGINAL image from the library without having Aperture installed?

    I started using Aperture back when it first came out.  I really had no idea what I was doing when I set everything up.  I got a new computer but do not have my Aperture disc anymore but I do have my old library.  I can get into the library and find the pictures in the Preview and Thumbnails folders, but these obviously are not the original pictures.  The ones in the Preview folder are only 10% of the size of the original digial photo.  I want to know if there is any way to get or reconstruct the original picture using the files in the library without installing Aperture.

    Hi Refringgers,
    Install the 30 day trial of Aperture. Open your Aperture Library, export the Masters and Versions.
    Other than that I will make a strong recommendation not to muck within the Aperture library. Yes, you can find your photos in there, but if you ever decide to again use it may well be unable to be opened. The other thing is the photos are scattered around in a gazillion folders it would take a long time, of course depending on the number of photos, to retrieve them.
    Cordially,
    RicD

  • Is there any way of converting a jpeg image into a vector in Fireworks? Deity Babbage, where be thee?

    I am hoping for a quick way of converting images (jpeg etc) into a vector.
    Is this possible?
    Thanks
    Eddie

    Try this:
    http://vectormagic.com/home
    It won't work with really complex images or photos, but if you have something like a logo, it can work well. You'll need to edit the vectors it generates to smooth out some bumps and incorrect nodes, but editing a vector is much easier than drawing the whole thing from scratch.
    Hope this helps!

  • Is there any way how to generate JPG image from DNG easily?

    I use PS, FW and Bridge.
    I have often a problem to show images for preview from DNG files.
    Please can you explain me, how to do it as a batch easily? Generate preview images from a whole folder?
    Do you generate JPG in original size or do you archive only DNG?
    Thank you

    Little confused here.  Are you saying you do not get a thumbnail for a DNG and therefore can not view as a preview?
    If you want to batch convert a DNG to a jpeg you can use tools/photoshop/image processor.

  • Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

    Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                           2. Is there any way or an update for the manipulation of the color
                               curves like in Gimp or Paintshop?
                                                        Dankeschön für jede Antwort die weiter hilft!!

    Hey Rich,
    It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT.  One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph.  I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other.  Most of the properties have been made invisible through the graph properties.  You can still see the legends however.  One caveat to this is that you will have issues accessing the different graphs.  You have to do it from a VBScript.  The following line of code worked for me:
    Call GraphObjOpen("2DAxis" + Str(NewAxis))
    Where NewAxis is a variable that defines which graph I want to look at.  You would of course have to loop through the graphs as you add data. 
    Cheers,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    12PlotStack.zip ‏12 KB

  • Is there any way for me to remove a broken audio jack stuck in my macbook?

    is there any way for me to remove a broken audio jack stuck in my macbook?

    You'll have to get a Dremel motor tool and some fine metal bits, make a jig to hold the Dremel so it's stationary, then a slider jig for the MacBook Pro so the bit can drill into the center of the stuck plug.
    Gently push the MBP against the drill bit so it drills into the stuck plug.
    Once the hole is drilled down deep enough, use some metal to metal epoxy resin to glue the bit into the drilled hole, then let it set up according to directions.
    Take a pair of vise-grips and get a good grip on the bit portion sticking out and gently pull it straight out, if you bend or twist, you can snap off the bit.

  • Is there any way to capture a list of the steps in editing a particular photo in a text file?

    I have just edited some photos for a friend who was short on time, and now she would like a list of the steps I took in editing.  Is there any way of listing those steps in a text file I could send her?

    Not so far as I know, into a text file. The History is not included in the metadata you can write out to XMP, so it cannot be extracted from there.  The History is embedded in a Catalog only.
    But it would be possible to Export as Catalog one sample image - or, a group of the images concerned. Your friend could open this very small catalog, and view the full History of what has been done to the selection of images it contains.
    Note: the History panel is only available in the Develop module, and you can only get into Develop when the image is not "offline". So your friend would need to get the right picture file(s) referenced into this small Catalog you supply. That can be done by re-browsing the location of the containing folder - so, it is not necessary for the images to be physically  living at the same path in both computers..
    More simply, by writing the final metadata out to the file, and sending the file along with its metadata, at least the finished adjustments can be looked at directly. You only need the Catalog with the History in order to see the sequence - and any changes of mind or explorations that have happened along the way.
    The sequence in which you set nondestructive adjustments does not technically matter; the Catalog method would mainly be of interest, to see an example of your working approach. The nice part about that, is that your friend could click through the History states and see how the image changes on screen - while also watching the sliders, tone curve etc moving around with each new step.

  • Is there any way to connect a mobile site made with Muse to a MySQL database?

    I've began the beginning stages of building a mobile site with the trial version of Muse and am really enjoying the functionality and ease of use. I'm eager to purchase the full version but one question stands in the way at the moment.
    The plan with this mobile site is to have it offer many if not all of the same features and functionalities of the desktop version. In order to achieve this I need to be able to sync the site up with a MySQL database, is there any way to achieve this in Muse? If not is it possible to do this once the site has been exported as HTML or uploaded to an FTP host?
    Thanks all!

    It would take a significant amount of work as you would have to change the pages to PHP. You would also lose any more compatibility with Muse.
    An alternative would be to host with Adobe Business Catalyst and upgrade to the eCommerce hosting plan and do your database functions using Business Catalyst Web Apps. It is a bit of a learning curve but in my opinion the better option than hosting on third party hosting and trying to convert everything.
    Keep in mind that even if you change the pages to php to add mySQL connection this would all have to be done by hand or with Dreamweaver. Muse does not support Database connectivity or dynamic content. The only real practical workaround is to use Business Catalyst along with Muse.

  • Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

    The full message said:
    There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later.
    I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
    Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

    I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
    1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
    2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
    3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
    4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
    5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
    6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
    7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
    8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
    IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
    i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
    thanks,
    K
    Message was edited by: K Paton

    1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
    Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it.  The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
    2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
    Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
    3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
    It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
    4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
    It's the connection on your phone. Samsung Galaxy SII? Android software?  What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot,  name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7,  I don't know the layout of that software, but presumeably similar.
    5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
    Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
    6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
    It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
    As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page  into view. Other option is opening a second tab with same website and just go between tabs to reference material.
    7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
    If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
    8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
    Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
    Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
    - Ceridwyn2

  • Is there any way to contact verizon with a detailed cell phone technical support question?

    Is there any way to contact Verizon with a detailed cell phone technical support question?  I prefer e-mail so as to provide details (like I am trying to provide here).  I have tried in-store personnel (no help at all) and the web chat - they just want to see me more data instead of helping me with my basic problem!
    I CAN NOT GET ANYONE FROM VERIZON TO GIVE ME ANY HELP NOR CAN I FIND A WAY TO FILE A COMPLAINT.  AT THIS POINT I JUST WANT TO DROP MY VERIZON ACCOUNT BUT I'M SURE THAT IT WILL COST ME A SMALL FORTUNE TO GET OUT OF IT.
    Here is my issue:
    Chat transcript removed as required by the Verizon Wireless Terms of Service
    BELOW IS A SCREEN COPY FROM REDDIT ABOUT SOMEONE WITH THE SAME PROBLEM WITH A VERIZON CELL PHONE
    So last night my RAZR MAXX HD did something totally bewildering by spontaneously downloading 2.6 GB of data over the course of ~ 3 hours. Fortunately I was able to catch this problem before it ended up being really expensive, but I still exceeded my 2 GB data plan by 600MB.
    The Culprits:
    Reddit News Free: 160 MB foreground / 0.96 GB background
    Android OS: 0 MB foreground / 1.18 GB background
    Several unnamed applications: ~ 350 MB
    Screenshots:
    The massive data spike
    Android OS data usage
    Reddit News Free data usage
    Weird unnamed processes
    Detailed timeline:
    5:12 PM: Incident begins according to VZW data usage website (2.60410 GB used). This is around the last time that I used my phone at the laundromat before getting dinner and watching Game of Thrones.
    8:04 PM: 50% of data allowance used (txt msg)
    8:31 PM: 75% of data allowance used (txt msg)
    8:58 PM: 90% of data allowance used (txt msg)
    9:13 PM: 100% of data allowance used (txt msg)
    10:05 PM: Got the text messages and immediately put the phone into airplane mode
    10:30 PM: Took screenshots
    10:45 PM: Enabled wifi, installed Kaspersky premium. Scan returned no threats.
    11:00 PM: Left phone in airplane mode, went to sleep.
    The questions:
    What was the root cause of this issue? Did Reddit News freak out as a result of an esoteric bug or was my phone hacked?
    If this was a simple Reddit News bug, then why was the Android OS also trying to use such a massive amount of background data?
    What the hell are these unnamed numeric applications? I've inspected my process history and this is the first time they have ever attempted to use data.
    I'm pretty sure that I can explain this situation to Verizon and get out of having to pay additional data usage fees, but I would like to know more about the problem before I get in touch with them.
    all 13 comments
    best 
    [–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago*
    All I can think is your phone may have background downloaded an OTA update, and you'd then be prompted with something like, "As update to your Android system has been downloaded, would you like to install it now?"
    I do find it very odd that the update would be 2.6GB. As a rough base, the CyanogenMod 10.1 firmware for your device is well under 200MB, so unless Verizon has a ****-ton of bloatware in the update, or it had to attempt to download multiple times for some reason, it may be a stretch.
    But doing a little homework, it looks like the Verizon Razr Maxx was updated to 4.1 in late March. Maybe they're still rolling it out in waves? Have you gotten the update yet?
    Edit: Aaaand I just noticed you appear to be running an AOSP-based ROM, which totally rules out a carrier update being sent out.
    Edit2: If you want to live dangerously, you could try running:
    #kill -9 12289
    That 12289 is the PID listed in your screenshot. But don't run that without fulling understanding the kill command.
    The ps command could also be of use, but probably not.
    permalink
    [–]lechnito[S] 2 points 1 year ago
    I can confirm that the phone is currently at 4.1.2 and that I wasn't prompted for an OTA update.The fact that both the Android OS and Reddit News processes were simultaneously using an extremely large amount of data is unlikely to be a coincidence... 
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago
    That is very curious that the spikes happened at the same time.I'm curious. It may have put at least some of that 2.6GB somewhere. You could use a data visualizer tool to see if you can find it, which may lead to more clues. 
    permalink
    parent
    [–]lechnito[S] 2 points 1 year ago
    The largest directories are:
    DCIM: Normal looking photos (90,825 KB)
    Android: Primarily map cache data (64,846 KB)
    If it was downloading content then it did not significantly save content to storage. It's not like I have anything particularly sensitive on the phone, but the idea that it was uploading a snapshot of my data definitely makes me uncomfortable.
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
    Yup, Digital Camera IMages and videos.Somewhere in /sdcard/Android would be my guess as to where a mysterious file would be downloaded, but if it's only 64MB, and mostly map data, I'd safely rule it out.I'm sorry, but I'm stumped here.Edit: I should mention I don't think this is malware, because unless a malicious app gained superuser access, any data it used would show under it's own apk in the data usage list, not Android OS. 
    permalink
    parent
    [–]mistrbrownstone 0 points 1 year ago
    DCIM: Normal looking photos (90,825 KB)
    Was it trying to auto-upload pictures or video to G+?I ******* hate that.
    permalink
    parent
    [–]lechnito[S] 1 point 1 year ago
    Although I'm not really up to speed with the Android platform, I come from a UNIX background so I feel comfortable running commands. How do I pull up a bash terminal? Do I need to root the phone first? 
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
    There's a number of terminal emulators in the Play Store that work well. You don't need a rooted phone to get to the shell as your user, but any privileged command won't execute unless you can grant it permission from the Superuser app that is installed when you root the device. So you could probably do a ps -e, but not a kill -9. 
    permalink
    parent
    [–]lechnito[S] 1 point 1 year ago
    Got it. I downloaded a terminal emulator but unfortunately those processes no longer exist.Does Android keep a generic log of system level events like /var/log/syslog? 
    permalink
    parent
    [–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
    I don't think so, and I know you'd need superuser permission to read most of the files in /var/log anyway. I'm not super familiar with how Android does its logging, but I do know that the two files of interest are the logcat and dmesg. 
    permalink
    parent
    [–]sh0nuff 1 point 1 year ago
    Want to mention here that using your settings to set your data cap (set it on your billing day), then you won't go over again.Those text messages are really unhelpful, as they send out well after the data has been used. Chances are good you hit close to the 2GB mark before you received the bulk of the messages. 
    permalink
    [–]kindofabuzz -4 points 1 year ago
    Quit installing pirated apps. 
    permalink
    [–]lechnito[S] 1 point 1 year ago
    That's definitely not the case here; both my PC and and Android phone are free from pirated apps.

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

Maybe you are looking for

  • Query variables for 0CALDAY

    Hello gurus,    I´m trying to create a query variable that shows the last calendar day(infoobject 0CALDAY) in the previous year, current year, next year. I´m not finding these variables in Business Content. Does anybody know any variable for this? If

  • Reg reference cursor

    First time i am using reference cursors. My question is shall i use cursor For loop for reference cursor inorder to fetch the records. I have defined like this? lsql varchar2(1000); TYPE L_CurType IS REF CURSOR; mm_cursor L_CurType; begin open mm_cur

  • Bridge opens slowly, then operates slower.

    When finally open it takes about 30 seconds to bring up an image.  Uninstalling and reinstalling has not helped and I am using the same computer. Can anyone help?

  • Corrupt MP4 files

    HI, I deleted some videos of my son off my N95 SD card, I have recovered them but now they won't play. PLEASE help as I don't want to loose them. Thanks

  • Exporting Planning Security ---------System 9 on  IBM AIX OS

    Hi I want to extract completely entire planning security like dimension(scenario,entity..) access,members,filters etc. I need some help with where the exportisecurity utility is located on unix server or please suggest any preferred way to extract it