Is there any way to boost a signal.

The television signal to each unit gets lost every hour for about 5 minutes, and the tech can't come back for 5 days according to the 800-Comcast. Is there any way to boost the signal in the mean time?

PamBarksdale wrote:
The television signal to each unit gets lost every hour for about 5 minutes, and the tech can't come back for 5 days according to the 800-Comcast. Is there any way to boost the signal in the mean time? Yes, but if you select the wrong equipment, you could be adding to your issues or your neighbors.... it is best to let the onsite Tech make the determination of what equpment you need and he/she has available to install.

Similar Messages

I seem to have very poor wifi signal strength,is there any way to boost my signal

I seem to have very poor wifi signal strength,is there any way to boost my signal

If you gave some information on what network equipment you are using (make, model, version) and where you are experiencing signal problems it would help in giving advice.

Is there any way to boost max volume??

is there any way to boost the maximum volume for the macbook?? i have everything all the way up but im just curious if there are any progs that will make it louder??

You can increase iTunes volume by choosing Show Equalizer, select the Preamp checkbox, and move the slider up.

Is there any way to boost flash performance in a MAC?

As I said... is it possible? Why is it too slow?
Any answer is welcome.
THANKS!

Are you referring to the IDE or the player?
if its the IDE, then you'll need to wait for Flash 9 which
will be
intel Native, if its playback then using the 9r28 player has
yielded
much better performance in our testing
> As I said... is it possible? Why is it too slow?
>
> Any answer is welcome.
>
> THANKS!
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

Is there any way to fix my signal issues on iPhone 4S?

I'm experiencing signal issues...Don't know if it is a hardware problem, but I want to know how to fix it.
If anyone else have gone thru this too, please let me know the right thing to do. Do I need to send it back to apple and see what's going on, or I need to see if it is a provider problem?
Thank you.

Basics from the manual are reset, restart, restore.
Another good troubleshooting step is Settings > General > Reset > Reset All Network Settings.
Also, remove and reseat the SIM card.
Do others in your area with the same carrier have issues?
Has the carrier been contacted to rule out network issues?
Has anything been done to narrow down the problem instead of jumping to the conclusion that it's an iPhone issue?

Any way to boost signal?

I just got my new mac pro set up with wireless keyboard and mouse. My excitement was diminished soon when my mouse dragging was very hindered. I searched the forums, and found out that the problem was caused by my steel desk- the computer is under it. (the only place for it). Is there any way of boosting or re-routing the signal. Again, I have no where else to put the computer, and would like to be able to use the wireless mouse.
Thanks

If you're using the external D-link adapter, all that's necessary is to obtain a USB extension cable and put the adapter closer to the mouse.
If you have the internal BT, you might wish to investigate to see if the D-link will work for you. The adapter isn't very expensive (roughly $50) but it's in the type of bubble-pack that requires blasting caps to open. Make certain that the retailer will allow you to return an opened package in case it doesn't work.

Any way to boost or re-route signal?

I just got my new mac pro set up with wireless keyboard and mouse. My excitement was diminished soon when my mouse dragging was very hindered. I searched the forums, and found out that the problem was caused by my steel desk- the computer is under it. (the only place for it). Is there any way of boosting or re-routing the signal. Again, I have no where else to put the computer, and would like to be able to use the wireless mouse.
Thanks

If you are one of the unlucky ones, your wires inside may not be connected correctly to the right terminal. There are many threads about whether one uses the wire labeled BT or #1 to connect to the Bluetooth module. You may want to test by using your mouse at the same level as your Mac Pro, some distance away from your steel desk. My BT Mighty Mouse is over 10 feet away, and it is discovered immediately by the MP. If you don't have that kind of range using direct line-of-sight, your wires may be mislabeled inside the MP.
Michael

Any way to boost audio input when recording?

Hi; I have been recording speech interviews with Audio-Technica mics on a ProTools set-up and they've sounded great.
I've recently tried recording using the mics in Garageband using a M-Audio Mobile Pre USB, but the audio levels are always too low unless the subject is an inch or two from the mic, which isn't the best way to get quality audio.
Is there any way to boost the audio input when recording in GB or any other tricks people know of?
thx, Charlie

I'm actually having the same problem, except I'm recording straight into the computer (no interface).
I tried using an MBox, but the computer won't even recognize it...(if anyone's got suggestions for why that is, I'll gladly take them...).
My main question is the same as Charles's, however - how come the input level is so soft when recording using the "Built-In Input" (where I can use a mic, and have mobility) as opposed to the "Built-In Microphone"?

Messages - Is there any way to resend texts automatically when you don't have signal, rather than having to constantly manually 'try again'?

When i have no signal and send a text, a red circle appears, prompting me to manually resend the text when i find signal. I live in an area with varied signal so this is beginning to get frustrating. Is there any way to set the iphone so it will automatically resend the text when it finds signal again, rather than having to manually resend it everytime? Thanks

When i have no signal and send a text, a red circle appears, prompting me to manually resend the text when i find signal. I live in an area with varied signal so this is beginning to get frustrating. Is there any way to set the iphone so it will automatically resend the text when it finds signal again, rather than having to manually resend it everytime? Thanks

Is there any way to limit usage on certain jetpacks?

Hi~
I have a shared everything plan 40GB. I live in the middle of nowhere. I homeschool and need to do a lot online. Area monopolized by satellite which is an awful but necessary evil. When it rains, forget TV or internet. They do still offer dialup. Ha! Anyway, so I chose this plan and it has been "okay". The signal is spotty and the 4G I was told I would get is hardly what I get on my phone when I am in the main cities. Still, we make do.
Here is my current dilemma. My elderly mother in law is staying with us for... a while. She is not a pro, but she can certainly get online. Of course, I have passwords (of my own making). My kid put a password on her laptop when she said she needed to check email. Well, it turns out that granny likes to play online games. The ones that stream. She sucked up all 40 GB in a few short days. Uploads, downloads, you name it. She has been told time and again that the usage was OVER. That she had to wait for it to roll over. She was still going online. I was in a panic with the emails about overages, etc. I had to disconnect the boxes and take out the batteries, just to be sure.
I do know that the boxes can be configured to only work with the mac addresses you designate. That's great. I did that with the first one, but not yet with the newer one, b/c it was only my husband, myself and kids-we are all VERY clear on usage. So, yeah..the one she has been using is the newer one b/c we trusted she would listen to what we told her.
My question is this: Is there any way that I can create a dedicated user "account & password" to her and then limit THAT usage? I know something kind of like this can be done for kids phones, but no clue about boxes. I really don't want to have to block her, but I cannot afford to sacrifice my kids education b/c she wants to play games. My spouse will never deny his mom anything, but he gets mad when told the usage is gone after a week. My usage is about to roll over again and I NEED it.
I asked a rep on "live chat" & they couldn't help-told me to call. I will call, but prefer to do it during the week, when no one will "overhear" and get offended. Any help or guidance would be greatly appreciated.
Thanks in advance'

Windchimes74, oh wow! That is a lot of usage in a short amount of time. We do have a great application called Family Base. You can restrict the amount of time/amount of usage that a particular device can be used. By doing this you can put a limit when Mom is online. Once the jetpack reaches that limit it will not allowed to be downloading anything else. This package is $5 a month for the whole account. It is an awesome feature that I myself use for many lines on my account.
RobinD_VZW
Follow us on twitter @VZWSupport

Is there a way to boost Safari? Snow Leopard 10.6.8, Safari 5.1.7 is very slow, almost dead. Thank you.

Is there a way to boost Safari? I'm using Snow Leopard 10.6.8, Safari 5.1.7 which has become very slow, almost dead. Many thanks!

If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
You can cancel DNS pre-fetching by going to Terminal and typing:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
You have to restart Safari for it to take effect.
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
For this and other reasons Apple switched their websites to HTML5 in January 2011:
http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
For Snow Leopard/Lion users this should also be read:
http://support.apple.com/kb/TS3408

Is there any way to connect disabled iPad to network via external software?

Hello,
My iPad is disabled because of a Bluetooth mishap (my keyboard in my coat pocket tried to enter my password too many times). So I can't enter my password on the screen. Unfortunately I didn't back up the last few weeks of documents in any way, via either iCloud or syncing. And I just can't erase all the work I've done--it's irreplaceable to me.
Is there any way to connect the iPad to a WiFi network through external software, maybe using the lightning connector?
I ask because in iCloud I marked the iPad as Lost (in Find My iPhone), so I may get another chance at entering my password if the iPad can get online to receive the signal. But because it's disabled it won't connect to a network.
Many thanks for any help!

Not a big surprise unfortunately... time to get an iPhone I guess!
Thanks for the answer Sir!

IPod 4 freezing, losing internet connection. Is there any way to fix this?

My iPod 4 is only six months old, but hasn't been working well recently. Some apps have been saying i dont have internet connection, when i have all 3 signal bars. Then today, it froze up.
I restarted it with the Home and Sleep buttons, and then it froze on the screen with only the Apple sign while starting up. I kept trying, and after restasrting it twice while plugged into my computer it started working again.
Can anyone tell me why this happened, and is there any way to prevent this from happening in the future?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Is there any way to get a better performance with this Xquery ?

I created two tables.
One has XBRL docoument with XMLType based on Clob and I'm going to select several columns from it and insert them into the other table.
I used this SQL using XMLTable.
INSERT INTO SV_XBRL_ELEMENT
SELECT r.finance_cd,r.base_month,xt.context_id,xt.ns,xt.name,nvl(xt.lang,'na')
as lang,xt.unit,xt.decimals,xt.value
FROM SV_XBRL_DOC r,
XMLTABLE(
XMLNAMESPACES(
'http://www.w3.org/1999/xlink' AS "xlink",
'http://www.xbrl.org/2003/linkbase' AS "link",
'http://www.xbrl.org/2003/instance' AS "xbrli",
'http://www.xbrl.org/2003/iso4217' AS "iso4217",
'http://www.xbrlkorea.com/kr/kisinfo/fr/gaap/ci/2007-02-09' AS "kisinfo-ci",
'http://www.xbrlkorea.com/kr/kisinfo/fr/gcd/2007-02-09' AS "kisinfo-gcd",
'http://www.xbrlkorea.com/kr/kisinfo/fr/profile/2007-02-09' AS "kisinfo-profile",
'http://www.xbrlkorea.com/kr/kisinfo/fr/ratio/2007-02-09' AS "kisinfo-ratio",
'http://www.xbrlkorea.com/kr/kisinfo/fr/common/scenario' AS "kisinfo-scenario",
'http://www.xbrl.or.kr/kr/fr/gaap/ci/2006-05-31' AS "kr-gaap-ci",
'http://www.xbrl.or.kr/kr/fr/common/pte/2006-05-31' AS "krfr-pte",
'http://www.xbrl.or.kr/kr/fr/common/ptr/2006-05-31' AS "krfr-ptr",
'http://www.xbrl.or.kr/2006/role/subitem-notes' AS "p0",
'http://xmlns.oracle.com/xdb' AS "ora"),
for $item in
$doc/xbrli:xbrl/*[not(starts-with(name(),"xbrli:")) and
not(starts-with(name(),"link:"))]
where $item/@contextRef
return <item contextRef="{$item/@contextRef}" xml:lang="{$item/@xml:lang}"
unitRef="{$item/@unitRef}" name="{local-name($item)}" ns="{namespace-uri($item)}">{$item}</item>'
PASSING r.xbrl as "doc"
COLUMNS context_id varchar2(128) PATH '@contextRef',
ns varchar2(128) PATH '@ns',
name varchar2(128) PATH '@name',
lang varchar2(2) PATH '@xml:lang',
unit varchar2(16) PATH '@unitRef',
decimals varchar2(64) PATH '@decimals',
value varchar(256) PATH '.'
) xt
SV_XBRL_DOC has 1450 records(1450 documents).
SV_XBRL_ELEMENT has more than 110,280 record (110,280 elements)
the sql above takes more than 6000 seconds with my machine (10g,sun5.8 4 cpus), I admit it's a big number of records, I'm looking for more efficient way to do.
Is there any point to boost the sql ?
here is the part of the xbrl document sample.
<?xml version="1.0"?>
<xbrli:xbrl xmlns:xbrli="http://www.xbrl.org/2003/instance" xmlns:link="http://www.xbrl.org/2003/linkbase" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:fines-b-ot="http://fss.xbrl.or.kr/kr/br/b/ot/2007-06-30" xmlns:fines-aa001="http://fss.xbrl.or.kr/kr/br/gaap/aa001/2007-06-30" xmlns:xbrldt="http://xbrl.org/2005/xbrldt" xmlns:ref="http://www.xbrl.org/2004/ref" xmlns:xbrldi="http://xbrl.org/2006/xbrldi" xmlns:iso4217="http://www.xbrl.org/2003/iso4217">
<link:schemaRef xlink:type="simple" xlink:href="http://fss.xbrl.or.kr/kr/br/fines/aa001/2007-06-30/fines-aa001-2007-06-30.xsd"/>
<xbrli:context id="ctx_AAA001C">
<xbrli:entity>
<xbrli:identifier scheme="http://fss.xbrl.or.kr">0010002</xbrli:identifier>
<xbrli:segment>
<xbrldi:explicitMember dimension="fines-b-ot:newItemDimension">fines-b-ot:AAA001C</xbrldi:explicitMember>
</xbrli:segment>
</xbrli:entity>
<xbrli:period>
<xbrli:instant>1999-03-31</xbrli:instant>
</xbrli:period>
</xbrli:context>
<xbrli:context id="ctx_BAA001C">
<xbrli:entity>
<xbrli:identifier scheme="http://fss.xbrl.or.kr">0010002</xbrli:identifier>
<xbrli:segment>
<xbrldi:explicitMember dimension="fines-b-ot:newItemDimension">fines-b-ot:BAA001C</xbrldi:explicitMember>
</xbrli:segment>
</xbrli:entity>
<xbrli:period>
<xbrli:instant>1999-03-31</xbrli:instant>
</xbrli:period>
</xbrli:context>
<xbrli:context id="ctx_CAA001C">
<xbrli:entity>
<xbrli:identifier scheme="http://fss.xbrl.or.kr">0010002</xbrli:identifier>
<xbrli:segment>
<xbrldi:explicitMember dimension="fines-b-ot:newItemDimension">fines-b-ot:CAA001C</xbrldi:explicitMember>
</xbrli:segment>
</xbrli:entity>
<xbrli:period>
<xbrli:instant>1999-03-31</xbrli:instant>
</xbrli:period>
</xbrli:context>
<xbrli:context id="ctx_DAA001C">
<xbrli:entity>
<xbrli:identifier scheme="http://fss.xbrl.or.kr">0010002</xbrli:identifier>
<xbrli:segment>
<xbrldi:explicitMember dimension="fines-b-ot:newItemDimension">fines-b-ot:DAA001C</xbrldi:explicitMember>
</xbrli:segment>
</xbrli:entity>
<xbrli:period>
<xbrli:instant>1999-03-31</xbrli:instant>
</xbrli:period>
</xbrli:context>
<xbrli:unit id="KRW">
<xbrli:measure>iso4217:KRW</xbrli:measure>
</xbrli:unit>
<fines-b-ot:AAA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">14</fines-b-ot:AAA001R>
<fines-b-ot:AAA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">0</fines-b-ot:AAA001R>
<fines-b-ot:AAA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">14</fines-b-ot:AAA001R>
<fines-b-ot:AAA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:AAA001R>
<fines-b-ot:A1AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">7</fines-b-ot:A1AA001R>
<fines-b-ot:A1AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">0</fines-b-ot:A1AA001R>
<fines-b-ot:A1AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">7</fines-b-ot:A1AA001R>
<fines-b-ot:A1AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:A1AA001R>
<fines-b-ot:A2AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">7</fines-b-ot:A2AA001R>
<fines-b-ot:A2AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">0</fines-b-ot:A2AA001R>
<fines-b-ot:A2AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">7</fines-b-ot:A2AA001R>
<fines-b-ot:A2AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:A2AA001R>
<fines-b-ot:BAA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">4788</fines-b-ot:BAA001R>
<fines-b-ot:BAA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">49</fines-b-ot:BAA001R>
<fines-b-ot:BAA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">4837</fines-b-ot:BAA001R>
<fines-b-ot:BAA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">30</fines-b-ot:BAA001R>
<fines-b-ot:B1AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">4788</fines-b-ot:B1AA001R>
<fines-b-ot:B1AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">48</fines-b-ot:B1AA001R>
<fines-b-ot:B1AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">4836</fines-b-ot:B1AA001R>
<fines-b-ot:B1AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">29</fines-b-ot:B1AA001R>
<fines-b-ot:B11AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">2317</fines-b-ot:B11AA001R>
<fines-b-ot:B11AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">21</fines-b-ot:B11AA001R>
<fines-b-ot:B11AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">2338</fines-b-ot:B11AA001R>
<fines-b-ot:B11AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">2</fines-b-ot:B11AA001R>
<fines-b-ot:B111AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">0</fines-b-ot:B111AA001R>
<fines-b-ot:B111AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">0</fines-b-ot:B111AA001R>
<fines-b-ot:B111AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">0</fines-b-ot:B111AA001R>
<fines-b-ot:B111AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:B111AA001R>
<fines-b-ot:B112AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">60</fines-b-ot:B112AA001R>
<fines-b-ot:B112AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">2</fines-b-ot:B112AA001R>
<fines-b-ot:B112AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">62</fines-b-ot:B112AA001R>
<fines-b-ot:B112AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:B112AA001R>
<fines-b-ot:B113AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">185</fines-b-ot:B113AA001R>
<fines-b-ot:B113AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">1</fines-b-ot:B113AA001R>
<fines-b-ot:B113AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">186</fines-b-ot:B113AA001R>
<fines-b-ot:B113AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:B113AA001R>
<fines-b-ot:B114AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">408</fines-b-ot:B114AA001R>
<fines-b-ot:B114AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">5</fines-b-ot:B114AA001R>
<fines-b-ot:B114AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">413</fines-b-ot:B114AA001R>
<fines-b-ot:B114AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:B114AA001R>
<fines-b-ot:B115AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">1664</fines-b-ot:B115AA001R>
<fines-b-ot:B115AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">13</fines-b-ot:B115AA001R>
<fines-b-ot:B115AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">1677</fines-b-ot:B115AA001R>
<fines-b-ot:B115AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">2</fines-b-ot:B115AA001R>
<fines-b-ot:B12AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">2471</fines-b-ot:B12AA001R>
<fines-b-ot:B12AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">27</fines-b-ot:B12AA001R>
<fines-b-ot:B12AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">2498</fines-b-ot:B12AA001R>
<fines-b-ot:B12AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">27</fines-b-ot:B12AA001R>
<fines-b-ot:B2AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">0</fines-b-ot:B2AA001R>
<fines-b-ot:B2AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">0</fines-b-ot:B2AA001R>
<fines-b-ot:B2AA001R decimals="0" contextRef="ctx_CAA001C" unitRef="KRW">0</fines-b-ot:B2AA001R>
<fines-b-ot:B2AA001R decimals="0" contextRef="ctx_DAA001C" unitRef="KRW">0</fines-b-ot:B2AA001R>
<fines-b-ot:B3AA001R decimals="0" contextRef="ctx_AAA001C" unitRef="KRW">0</fines-b-ot:B3AA001R>
<fines-b-ot:B3AA001R decimals="0" contextRef="ctx_BAA001C" unitRef="KRW">1</fines-b-ot:B3AA001R>
</xbrli:xbrl>

Using 11g along XML indexes can greatly improve this XQuery. We can discuss further offline.
Regards,
Geoff

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

Is there any way to boost a signal.

Similar Messages

Maybe you are looking for