Is there any way to capture the output of a trnsaction

Hi EXPERTS,
i TRIED TO CAPTURE O/P OF TRANSACTION IW3M USING SUBMIT,
IT WASNT SUCCESSFUL
pLEASE SUGGEST ME SOME OTHER WAY TO DO.

Hi,
Did you check spool requests -> SP02.Could you elaborate on how you came to the conclusion that it wasnt sucessfull?

Similar Messages

Is there any way to stop the output of the iMac display to a connected TV?

I just bought an iMac 21.5 and successfully connected it to my plasma HDTV using a Mini Displayport to HDMI adaptor and HDMI cables.
Ideally, I would like to have the HDTV set up as a second display for watching movies, rather than mirroring the two displays. However, if I set the iMac video output in this configuration, it seems like it permanently keeps the 2nd display on, even when my TV is turned off. As a result, some of the functions I have on (such as triggering Expose) when I scroll to the corners of my display stop working, unless I change mirroring on, or if I physically disconnect the HDMI cable from the iMac.
My question is - Is there any way in software to disable the video output to Minidisplayport (instead of mirroring, or disconnecting the cables)?
If it turns out that Mirroring is the only way to solve this, my question would be - does turning out mirroring affect the main iMac LED display in any way?

Hi,
Did you check spool requests -> SP02.Could you elaborate on how you came to the conclusion that it wasnt sucessfull?

Is there any way to change the output audio device for FireFox?

Hey,
I'm trying to output the audio from my FireFox browser to my external bluetooth speakers, and I can't figure out how to for the life of me. I'm using google play music (just made the switch from Chrome), and for some reason I can only get FireFox audio out of the system speakers. There seems to be no settings to change this in Windows or FireFox, can someone suggest a plug-in or workaround? Really don't want to go back to Chrome over some stupid issue like this.
Thanks,
Joe

I am pretty sure that the plug ins are responsible for this, My Compuer > Control Panel > Sounds and Multimedia Properties > Audio > Sound Playback, though the menu may be different in 8.1,
Please see these as well:
*[[What to do if Firefox won't play any sounds]]
*[[Fix common audio and video issues]]

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

Is there a way to change the output type for Email Remittance Program?

Hello,
We are trying to implement Separate Remittance Program.The seeded output type is PDF( I have checked the output type for send separate remittance concurrent program) however the
email which we receive looks like a regular email I mean with a normal text . Is there a way to get the output in different type like excel,attachment,pdf.
Any inputs would be highly appreciated.
Thanks,
Sushma

Currently there is a bug raised
Bug 8208646 : R12 UNABLE TO SEND SEPARATE REMITTANCE ADVICE AS EMAIL ATTACHMENT IN PDF.
If you want to customize this process you need to create data definition,new rtf template and bursting program to send pdf as attachment.

Is there any way to make the cursor appear larger in Mac OS X?

Wow, love my 27" screen, but have trouble finding the cursor! Is there any way to make the cursor appear larger? Perhaps adjustable for fine print capture?
Thanks!

System Preferences -> Universal Access -> Mouse -> Cursor size
However, I prefer using Mouse Locator (free download)
<http://www.versiontracker.com/dyn/moreinfo/macosx/26157>
I like this Mouse Locator Graphic
<http://homepage.mac.com/douglasn/locatorexchange/AD/1/MouseLocator.png>
I also enjoy my 27" iMac. It is just so nice withing on it.
Message was edited by: BobHarris

Is there any way to get the query used in discoverer from backend??

Hi All,
I am new to dicoverer.
Is there any way to get the query used in discoverer from backend??
Thanks,
Sachin

Hi,
you can view the SQL from within the discoverer menu:
in desktop: View-> SQL Inspector
in Plus: Tools-> Show SQL
The SQL in the DB tables is encrypted so it's a problem getting it from there.
You can export the workbook into SQL but it is not working for every worksheet (subquery, inline pivot tables...)
you can create a batch file to export them all using the output of this script:
select null,null,'echo off'
from dual
union all
select distinct
qs.qs_doc_name Workbook_name,
qs.qs_doc_details Worksheet_Name,
'start /wait <path>\dis51usr.exe /connect '||'&p_user_name'||'/'||'&p_password'||'@'||'&p_env'||' /apps_user /apps_responsibility "&responsibility" /opendb '||
chr(34)||qs.qs_doc_name||chr(34)||' /sheet "'||qs.qs_doc_details||'"'||' /export SQL "C:\Export Discoverer SQL\'||qs.qs_doc_name||'-'||qs.qs_doc_details||'.sql" /batch'
from eul_us.eul5_qpp_stats qs
where qs.qs_doc_name is not null
--order by 1,2
union all
select null,null,'echo off'
from dual
union all
select null,null,'exit'
from dual

Is there any way to capture maximized event of a Internal frame

Is there any way top capture maximized and restore event of the Internal Frane ...
Thanks in advancde
Ravi

Yes,
Check the InternalFrameListener
There are methods such as
internalFrameActivated( InternalFrameEvent ife )
internalFrameDeiconified( InternalFrameEvent ife )
internalFrameIconified( InternalFrameEvent ife )
etc.
Jean-Francois Gilbert

Is there any way to change the type of Transport like workbench to Customiz

Hi All,
Here we are having very silly question.
Is there any way to change the type of Transport like from
Workbench to Customize and from Customize to Workbench within the same client.
Assume that there the no object associated with the transport.
Your quick respose is highly appreciated...
Thanks in Advance!

No this cannot be done.
Both work bench and custimizing are separate entites when it comes to tranport layers config.
You cannot save a report change into customizing request this will be saved into work bench request only .
In the same way table entries or some customizing tasks can be captured only into custimizing tr.
Br,
Vijay.

Are there any way to recover the deleted images form iPhone 4

hello guy's
are there any way to recover the deleted images form iPhone 4
note : i haven't make any copy of the photo in my pc so i relay need for them
plz help

The Camera Roll is for temporary storage as with any other digital camera. Although photos in the Camera Roll are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, photos in the Camera Roll can and should be imported by your computer ASAP. If you didn't sync your iPhone with iTunes since these photos were captured by your iPhone and the photos in the Camera Roll weren't imported by your computer, the photos are gone.
Depending on how wealthy you are, you can contact a data recovery service to see if they can recover deleted photos from an iPhone's flash drive, but you will pay an arm and a leg for this. Such a data recovery service is not cheap and with no guarantee the data will be recoverable.

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to Mask the Name when a select statement is issued?

Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank You

user3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

Is there any way to identify the particular socket connection is closed ?

Is there any way to identify the particular socket connection is closed or not ?
Any methods ???
How can the program knows the connection is lost or some thing ...
Is the socket throws some excpetions when there is no active connection ???
namanc

If you get an IOException when you try to use the socket, the connection was obviously closed.
The correct way for an application to know if the socket was closed is:
1) the server sends a message indicating that the socket should be closed
2) the client closes the socket itself

Is there any way to capture the output of a trnsaction

Similar Messages

Maybe you are looking for