Is there any way to change audio conforming in preferences?

Hi
I am uploading about 4 hours worth of footage for a new project to CS5 Premier Pro, and have found that I can only capture in 10 minute segments as when I capture anything longer due to capture/conform back up that inevitably occurs eventually PP decides that its not responding.
Does anyone else experience this & is there some way I can turn off the conforming while I am capturing & then capture the whole project at once, like overnight while I am sleeping?
thanks
Mandi

Mandy,
As Harm points out, Conforming is necessary. What is happening is that the Audio is converted to 32-bit floating-point for accurate editing, and then the PEK (Waveform Display) file is created. You end up with a CFA and a PEK for each Audio Clip, and these will be located where you directed your Scratch Disks (files).
I can only capture in 10 minute segments as when I capture anything longer due to capture/conform back up that inevitably occurs eventually PP decides that its not responding.
This is an odd problem, and I think that Harm is correct, that you have an outside issue, causing this. Now, when you say "capture," you do mean "Capture" as from a miniDV tape camera over FireWire using the Capture module in PrPro, don't you? If you are not doing Capture that way, then you are Importing the files. If the latter is the process that you are using, can you give us the full details of those files?
If the former, Capture, that should be in accordance with the Sequence's Capture settings.
Good luck,
Hunt

Similar Messages

  • HT201448 Is there any way to Change the order of preference?  Ie wiki before Xcode?

    http://support.apple.com/kb/TS5239 states the order services take precedence.  I would like wiki to come first.  Is there a way to configure redirection?

    Hi,
         Sorry for not updating.  I did eventually figure it out.  There are two files you need to edit, one for HTTP (port 80) and one for HTTPS (port 443):
    /Library/Server/Web/Config/apache2/sites/0000_any_80_.conf
    /Library/Server/Web/Config/apache2/sites/0000_any_443_.conf
         Then edit the line:
    DirectoryIndex index.html index.php /xcode/ /wiki/ default.html
         If you want the /wiki/ to come first put it before /xcode/
    If you want the main page to load first put default.html before /xcode/
         I'm not sure if the Server.app will overwrite this line.  It might, but it doesn't seem to overwrite Include directives.  In apache, the conf file is scanned top-to-bottom, and later-occurring directives will override the same type declared earlier.
         So if the line you modify ends up being overwritten (or even if you just want to use an Include in the first place), then what you'd do is add a line to the bottom of the <VirtualHost> entry in the the *80.conf and *443.conf files like so:
    Include /Library/Server/Web/Config/apache2/local_configuration_80.conf
         Then in your local_configuration_80(/443).conf files (that you create) you'd put the DirectoryIndex directive with the order you want and that would always override the one set by Server.app.

  • I recently updated to 10.8.2 and now my notes from my iPhone no longer appear in my mail nor do my calendar appointments. Is there any way to change it so they will appear?

    I recently updated to 10.8.2 and now my notes from my iphone no longer appear in my mail nor do my calender appointments.  Is there any way to change it so they will appear?

    If it has the same (bad) behavior on two different systems then there is a very good chance that the  drive is toast.
    BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
    regards

  • Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?

    Hi at the moment my ipod is on manual sync mode. Is there any way of changing this to auto-sync without losing the music on my ipod or library? Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
    This is so I can delete music from my ipod knowing its rated on my i-tunes so I can then see later if I want to re-add it based on its rating
    Thanks

    Is there any way of changing this to auto-sync without losing the music on my ipod or library?
    Unfortunately there is not.
    Possibly more importantly is there a way I can transfer the ratings from my ipod onto my i-tunes?
    Not without the help of third party software such as this one:
    http://www.copytrans.net/copytrans.php
    B-rock

  • Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

    Is there any way to change the default font for outgoing text-messages, in "Messages"?
    I can change it for one conversation, but then it resets to the default, tiny font.
    The preferences menu only lets me change the conversation font.
    (OSX 10.10)

    Hi,
    As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
    And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
    Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
    All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
    The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
    Changing the Font would involved editing the Balloon.transcript file.
    10:34 pm      Saturday; December 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

    fruhulda wrote:
    If you see any grey"background" if is on the left and that is the comment field.
    Hi fruhulda
    It's not the comment field which is a restrictive description.
    In fact it's the window's background.
    Yvan KOENIG (VALLAURIS, France) lundi 26 septembre 2011 12:08:45
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Thunderbird puts a new message at the end of the thread. Is there any way of changing this preference to listing new message at top of the thread?

    Thunderbird puts a new message at the end of the thread.
    Is there any way of changing this preference so that new messages are displayed at the top of the thread.
    This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.

    No it is not possible. The newest message is attached to the message it is in reply to.
    The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss

  • Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

    Hi all
    Is there any way to change the security on multiple pdfs without having to open each pdf in acrobat ?

    Hi Gilad
    Thanks for the reply
    I'm not sure how to create an action I have Acrobat Pro 8.
    My company would love if I could make it as a batch file or some exe so that each file doesn't have to be opened in Acrobat

  • HT4528 Is there any way to change the contact email?

    Is there any way to change the contact email? I had deleted my contact email without even a thought about my Apple ID. Any suggestions?
    <Re-Titled By Host>

    Without being able to login with the Apple ID credentials, it is not possible to change the recovery email address.  This is called security and prevents others from forcibly changing your Apple ID password and taking over the account.
    Options are either remember the security answers or fix access issues with the recovery email account.

  • Bcc: Is there any way to change the "undisclosed recipients" text ?

    Bcc: Is there any way to change the "undisclosed recipients" text appearing on the message at destination when I used Bcc?...
    Eudora offers the possibility to choose the text that appears when using Bcc.
    Does Mail do the same?...
    If yes, how?...
    Thanks
    sergio

    Every message that I send with addresses ONLY in Bcc:, when is received by others, or when I receive it back from some yahoo group, has the reading: "undisclosed recipients"...which I can see either when I receive an answer from some individual or when I receive the messages from the group.
    Of course, if I write any address in the "To:" space, what comes out is the address I type.
    My question was something else: HOW to CHANGE what comes out.
    In Eudora it is possible to have ANYTHING one wishes appearing INSTEAD of the "undisclosed recipients", it's enough to type a code inside the message once, and choose the text one wishes to appear.

  • Is there any way to change the restrictions passcode?

    Is there any way to change the restrictions passcode short of erasing all content and starting over?

    Remove restriction password
    1. Restore to Factory Default
    2. You can also restore from a backup before you enable the Restriction Code

  • Is there any way to change the web dynpro Appl. description at runtime

    Hi All,
    Is there any way to change the description of the Web dynpro Application at runtime.
    Thanks,
    Arti.

    There is an API to change the application description at runtime, but it will be new in NetWeaver 7.0 Enhancement Package 2 (so you probably don't have access to it yet). For the future here is a sample of the API:
    wd_this->wd_get_api( )->get_component( )->get_application( )->set_window_title( lv_window_title ).

  • Is there any way to change the codec of an itunes movie?, is there any way to change the codec of an itunes movie?

    i just got a pair of mobile theatre glasses, and when i tried to download a movie from itunes onto it it said "file not supported", is there any way to change the codec of movies on itunes to mpeg2?

    Suggestions to Apple will be best submitted through the iTunes feedback page. Your comments will be most likely to get to the proper people within Apple that way.
    Regards.

  • Is there any way to change the type of Transport like workbench to Customiz

    Hi All,
    Here we are having very silly question.
    Is there any way to change the type of Transport like from
    Workbench to Customize and from Customize to Workbench within the same client.
    Assume that there the no object associated with the transport.
    Your quick respose is highly appreciated...
    Thanks in Advance!

    No this cannot be done.
    Both work bench and custimizing are separate entites when it comes to tranport layers config.
    You cannot save a report change into customizing request this will be saved into work bench request only .
    In the same way table entries or some customizing tasks can be captured only into custimizing tr.
    Br,
    Vijay.

  • Is there any way to change the label of my VO attributes

    hi ,
    Is there any way to change the label of my VO attributes so that it will have more logical presentation
    Thanks
    Musahib

    Hello Alex,
    I 've just checked my webbeans and the COLUMN_NAME_LABEL property is not use by the EditCurrentRecord, FindForm and RowsetBrowser webbeans.
    I had the following line to my custom EditCurrentRecord, FindForm and RowSetBrowser.
    So I can set Column display name ones for each webbeans.
    It's better than do it with different methods for each webbeans!!!!
    if((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL") != null)
    rField.setPromptText((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL"));
    In the ViewCurrentRecord something was done but with errors. Oracle Developers used getName() method instead of getColumnName()!!! So I rewrite it.
    if((String)qView.getProperty(attrs[attrNo].getName() + "_LABEL") != null)
    sHeader = (String)qView.getProperty(attrs[attrNo].getName() + "_LABEL");
    Hope this will help!
    Email if you need more.
    [email protected]
    Jean-Nokl

Maybe you are looking for