Is there any way to clear the Update badge from Settings?

I don't want to update to IOS 5.1. I prefer to keep running 5.0.1 which is runing fine and fast for me. Seems like when I update too much, my i devices end up slowing down to a point where they frustrate me. Best to leave them the way they were when I got them. I'll get 5.1 when I get a new iPad and/or a new iPhone.
But I'm not fond of staring at this red badge on settings for the next several months. Seems like there should be a way to clear it without having to obey it.

GeneTucc wrote:
I don't want to update to IOS 5.1. I prefer to keep running 5.0.1 which is runing fine and fast for me. Seems like when I update too much, my i devices end up slowing down to a point where they frustrate me. Best to leave them the way they were when I got them. I'll get 5.1 when I get a new iPad and/or a new iPhone.
But I'm not fond of staring at this red badge on settings for the next several months. Seems like there should be a way to clear it without having to obey it.
You MUST OBEY!! Repeat YOU MUST OBEY, YOU MUST OBEY!

Similar Messages

Is there any way to change the document size from scene to scene?

I'm building a portfolio site, but I need the document size to be different from each scene. I'd rather not create a separate swf/html file for each page since that would disrupt the transition between scenes (not to mention all the wok I went through to get the dropdown menus working).
For instance, the "home" scene is structured for 1200x670 px, but the portfolio scene labeled "published" needs to be at 1200x1500px.
Is there any way to change the document size from scene to scene? OR; If, for instance, I made the universal document size 1200x1500 for the entire flash file, is there a script that would restrict the "home" scene to only show the first 670 pixels?

not in flash alone.
you may be able to do what you want using javascript in your html document and using the externalinterface class to communicate between your actionscript the embedding html javascript.

Is there any way to know the T-code from the screen?

Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit.

Is there any way to collect the file list from UTL_FILE_DIR.

I expect the use "Oracle supplied package UTL_FILE" to import our customer order shipments to table by XML format files. I already did the procedure to import one XML file into Table by DBMS_XMLSave.insertXML and UTL_FILE. GET_LINE. And it did work.
My question is :
Is there any way to collect the file list from UTL_FILE_DIR. (I put all import XML files into `/usr/tmp?, I want to get all file names from this folder and feed them into UTL_FILE.FOPEN.)
Thanks in advance

UTL_FILE_DIR is a very dangerous and deprecated parameter. Oracle very specifically recommends not using it. You should be using directory objects instead.
As for doing a directory listing, you can use Java stored proc. External procs/functions are not required.
The following sample shows how to use such a Java stored proc to insert the result of a directory listing into a session temporary table:
create or replace and compile java source named "ListFiles" as
import java.io.*;
import java.sql.*;
public class ListFiles
        public static void getList(String directory, String filter)
        throws SQLException
                File path = new File( directory );
                final String ExpressionFilter = filter;
                FilenameFilter fileFilter = new FilenameFilter() {
                        public boolean accept(File dir, String name) {
                                if(name.equalsIgnoreCase(ExpressionFilter))
                                        return true;
                                if(name.matches("." + ExpressionFilter))
                                        return true;
                                return false;
                String[] list = path.list(fileFilter);
                String element;
                for(int i = 0; i < list.length; i++)
                        element = list;
#sql {
insert
into directory_list
( directory, filename )
values
( :directory, :element )

Is there any way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved?

Is there a way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved? When the print screen drops down, it covers the page and the info needed to create the file. Thank you

You will find that this is application dependent. Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring. There is no way for the user to change that behavior. Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc. The modal boxes can be moved around so you can see the page behind.

Is there any way to delete the favorites folder from the mac mail sidebar?

I recently made the mistake of flagging two email messages. Immediately I now see a "Flagged" icon in my Mac Mail sidebar, right under the Inbox. I the "unflagged" the messages. They went away but the Flagged icon won't. It now seems to be a permanent fixture of my mail sidebar. Is there any way to move, relocate or delete a mailbox icon you don't use and don't want to see?

There's no "downgrade" from OS X Server 10.6 Snow Leopard Server to client.
Acquire the current OS X client software, boot the DVD and use Disk Utility to erase the target disk, and reinstall the software.
Leaving the box with the server software running, with the services stopped, adds negligible performance overhead. If any.

When changing "browser.newtab.url" is there any way to prevent the address bar from getting focus?

When I change "browser.newtab.url" to about:home and open a new tab, focus is set to the address bar not the search box on the firefox home page. The same thing happens if i change the url to google.com or another search engine. Is there any way to prevent this from happening.

Custom new Tab has a small bug if the start page is exactly the same as the new tab page. Then the focus of the start page is on the address bar. Just leave the "www." out in the startpage and use "www." in the new tab page then it works perfectly. e.g.
Startpage: google.com
new Tab page : www.google.com
Now the focus of the start page is on the search box.

I do not have Aperture installed on my computer anymore but I do have my old library. Is there any way to extract the ORIGINAL image from the library without having Aperture installed?

I started using Aperture back when it first came out. I really had no idea what I was doing when I set everything up. I got a new computer but do not have my Aperture disc anymore but I do have my old library. I can get into the library and find the pictures in the Preview and Thumbnails folders, but these obviously are not the original pictures. The ones in the Preview folder are only 10% of the size of the original digial photo. I want to know if there is any way to get or reconstruct the original picture using the files in the library without installing Aperture.

Hi Refringgers,
Install the 30 day trial of Aperture. Open your Aperture Library, export the Masters and Versions.
Other than that I will make a strong recommendation not to muck within the Aperture library. Yes, you can find your photos in there, but if you ever decide to again use it may well be unable to be opened. The other thing is the photos are scattered around in a gazillion folders it would take a long time, of course depending on the number of photos, to retrieve them.
Cordially,
RicD

HT2480 Is there a way to clear the calendar invitations from the iPhone invite inbox when the Meeting is accepted by a delegate?

I am running an Exchange / Outlook 2010 environment with many mobile users accessing email and calendars with iPhones. Senior Executives have delegated their Calendars to Executive Assistants, who manage them mostly from Outlook. When Meeting requests arrive for the executives, their assistants Accept, Decline or mark as Tentative as the calendar allows.
The executives have only their mail account on their iPhone. The assistants have both their account and the executive's Exchange ActiveSync account on their phones. When the request is handled and a Send Response Now is submitted, the calendar invitation does not get cleared from the Senior Executive's Calendar invitation inbox, or the Calendar invitation inbox on their assistant's phone (which is to say, the Senior Executive's Calendar, which is a secondary calendar at this point) but it does show up properly on their Calendar. It seems the cache doesn't know that the request has been handled and does not clear the flag.
Other than turning off the Calendar, deleting the ActiveSync data and downloading fresh data, is there a way to correct this? I have tried multiple switches and settings, notifications, etc. I have even dabbled in Outlook's Rules, since this is where the delegation occurs. Once a Meeting is accepted, how can it be cleared in the inbox? This is not a badge, as I've turned off badges.
It affects not only the iPhone 4 and 5, but also iPads and iPad Minis running iOS 6.0.1 or better.

I have similar issue. Sharing calendars in the house hold and when I did it lit up my calendars inbox with 21 messages and no way to clear them. Hope this is fixed in the next iOS release.

Is there any way of removing the browser buttons from the right click menu?

Recently when I right-click on a web page, there are browser buttons (forward, backward, refresh, bookmarks) on the right-click menu for some inexplicable reason. I mean, its kind of absurd that anyone would put browser buttons there, considering the real browser buttons literally right there at the top of the window, and I guess that kinda bugs me.
Anyway, how did I get rid of them? There doesn't seem to be any way to do so in the customize window, and I've been looking for an add-on but don't really know what to search for. Does anyone know?
Where did those come from anyway? They weren't there a week ago, and I'm pretty sure these things don't normally just pop up out of nowhere. If nobody knows, its really not important. The important thing is getting rid of them. Thanks!

That was a new feature in Firefox 32, which was released back in September. Use this UserStyle to get rid of those buttons and restore the text menu items.
https://userstyles.org/styles/104945/fx-32-context-menu-full-text
''You'll need the Stylish extension to be able to install UserStyles.''
https://addons.mozilla.org/en-US/firefox/addon/stylish/

Is there any way to clear Managed Server tmp from console or automatically?

When we undeploy, and then install a new version of a web application (Managed Server on Weblogic 12.1.2, using a deployment plan and default staging, which is copy to server), the web application still behaves like the old version. If we clear the tmp directory of the managed server beforehand, the changes are correctly reflected, which is fine if you have access.
But the issue is: We want to give developers deployment access to the admin Server (so they test their application in a representive environment), but we do not want them doing anything on the underlying OS.
I have googled, checked in books and searched in the console, but I have not yet found any way to force Weblogic to clear its temporary space automatically with every restart or deployment, nor any option to do this manually from the console (which a deployer could then do himself).
Am I overlooking something obvious? How would you get around this issue?
Thanks for any hints or answers & Cheers!
Bogoy

Thanks all,
"nostage" isn't really a current option, as it requires the deployment to be deployed to the filesystem - which again means the user needs access to the OS, or then some deployment staging area needs to be set up having some script distribute the deployment to all the machines it needs to be located on, respectivley to a shared mount.
Appearantly the tmp directory is not cleaned up in all situations.
Oracle Support is trying to tell me, that this not a bug.
If that where so, this somehow invalidates the purpose of the default "deployer" role in weblogic, with which a admin console user can only monitor and deploy applications, but does not have admin access, as this user will always also need access to the OS. I fail to see how this would be by design, if clearing tmp or giving the option to do so in weblogic, would allow for console only deployer functionality.
Scripting deletion of the directoy may be a workaround, but due to different setups it might be a hassle and such a script would also still not be invokable for the deployer on the console as long as we are running nodemanager in java-based mode. (changing this to script-mode is not possible short term)
But much appreciated input - thanks

In Aperture, is there any way to remove the speckled effect from scanned early matt prints?

I have a number of photos from the 1960s and 70s, the surface of which is covered with a matt effect. I suppose this was designed to stop fingerprints, but when scanned it shows up as a fine network of bright semicircles. The images are dreadful. My scanner has a setting that will remove this pattern, but at the cost of reducing the resolution to little more than 100 dpi, making the scans virtually unusable in anything like a Photobook. Are there any features in Aperture that might help? Or failing that, perhaps in Photoshop?

What you need, is a dedicated image restauration filter that recognized the regular frequency pattern superimposed onto the prints. You can do this in advanced Image processing packages that let you compute the fourier transform of the image and then suppress or attanuate the frequency bands of the artefact with a band-stop filter.
But neither Aperture nor PhotoShop have this kind of filter. In Aperture and Photoshop you can only soften the effect by blurring and then exporting a smaller version of the image.
The algorithm that your scanner uses is probably the best that can be done, even if the resolution is only 100 dpi.
Do you still have the negatives? Scanning the negatives at a high resolution may give you better results.
Regards
Léonie

Is there any way to run the datasocket server from the vi

I want to run the datasocket server from the LabVIEW program and is there any command to do this. Because, I built one application vi and this vi is link with another vi using datasocket.So every time before i run the program, i need to run the data socket server. So if i forget to run the datasocket server, I need to restart my vi. So what I want to do is I want to run the data socket server, when i open this VI. So that I do not forget. Thanks.
Saw.

In the examples\comm folder there is a file called datasktxwin.llb In that library open e.g. DS 3D Graph Writer...launch it and you will see that it launches the data socket server. Take a look at the code and you'll find a VI that launches the server; "Launch DS server if Local URL.vi".
If you know the path to the server executable you can always launch it using the System Exec.vi from the communication palette too. The typical command line would then be:
C:\Program Files\National Instruments\DataSocket\cwdss.exe
MTO

I recently updated my iPhone's 3GS software to iOS 5.1...Is there any way to remove the camera button from the lock screen?

Heeelp?!...

I did just that, good idea.
I stated in my feedback message that I feel it disturbing that someone handling my iPhone, but not having the passcode, can take photos with my phone. Photos of --<sigh>--Lord knows what. While the phone's usually in my pocket or otherwise close to my person, that's not always the case.
Now, I'll grant that it is nice to have the option to allow someone to take a photo with my phone without also giving them access to everything else. In fact, that's a very nice little tidbit. I'd just like to have the flexibility to prevent people from taking pics with my phone, should they happen to have it in hand and feel the urge to add to my camera roll even without my approval. There's real opportunity for mischief in this.

Safari-Is there any way to stop the tab bar from disappearing when you scroll down?

It's really annoying. I know tapping it makes it come back, but still.

You will find that this is application dependent. Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring. There is no way for the user to change that behavior. Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc. The modal boxes can be moved around so you can see the page behind.

Is there any way to clear the Update badge from Settings?

Similar Messages

Maybe you are looking for