Is there any way to compare between last two activation of a Transformation

Hi,
I have activated a transformation 2 days back. Later on I found that the same transformation has been activated by someone else. I knew that from the transport organizer. I want to know what changes has been done after my activation. I have gone through each and every step i.e start routine or field routine everything. Didn't find any commenting also. Is there any way to compare the version between last two activation of that transformation or any BW Object.
Any version management option is available or not.
Thanks in advance
Snehasish

You can get the information who had changed and at wht time from the properties of the Transformations
Menu --> Transformation -> properties --> you can get who had changed n time...
if you want to compare the versions .... you can follow the below steps...
From the menu bar of transformations -->Extras --> display generated program --> utilities --> versions --> version management
This will display the changes made... if any.
if there are no changes it will display only one...version.

Similar Messages

Is there any way to switch between using two different phones?

I know when phones have SIM cards (like with ATT), you can use two different phones by simply moving the SIM card from one phone to the other and ATT is none the wiser.
Is there any way to do that sort of thing with Verizon?
I currently have an iPhone 5 but would like to start playing around with Android (I'm a gadget nut). So, assuming I find an unlocked Android phone, is there any way to bounce back and forth between using different phones (obviously only one at a time)?

Michael_F wrote:
So, the SIM card contains all the info necessary for the new phone to ring when called, etc?
yes, assuming the phones use the same size SIM card (otherwise, you'll need an adapter or a new SIM card; the cards are free at your local Corporate Verizon store).
4G SIM Information | Verizon Wireless

I have a MacBook air with OS X version 10.8.2 and an HP OfficeJet G85. Is there any way to print between the two?

I am aware that the HP OfficeJet G85 is no longer supported but are there any apps or anything that I can download that would make them compatible?

Hi,
Indeed the printer is not compatible but you may be able to find some workarounds:
For printing try the HPIJS print drivers, be sure to install any of the 3 required downloads prior following the printer set up instructions:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosxhpijs
For scanning try Vuescan which seems to support your printer:
http://www.hamrick.com/vuescan/hp_officejet_g85.html
Shlomi

HT204380 Is there any way to "FaceTime " between 3 or 4 users at the same time?

Is there any way to "FaceTime " between 3 or 4 users at the same time?

No. FaceTime is one on one only.

TS4006 My kid misplaced her iPad, we can't find it for almost three months already. It is connected to our other iDevices by 'Find My iPhone/ Mac' and the iPad show still offline until now. Is there any way to find the last location before it was off ?

My kids misplaced her iPad, we can't find it for almost three months already. Check using 'find my iPhone' it show the iPad still OFF. Is there any way to find it last location before it was OFF ?

Simply stated that is design. If you want to suggest a change, there is a feedback section elsewhere on this site.
Barry

I lost my iphone but the battery has died. Is there any way to see the last known location of my phone before it shut down?

I lost my iphone but the battery has died. Is there any way to see the last known location of my phone before it shut down?

No

Is there any way to tell the last date my ipod was plugged into my computer?

OKay, this may be a techie question, but I'm pretty savvy so if this info is contained in a file somewhere, you can feel free to explain how to find it, I can look for it.
i Misplaced my iPod nano at some point in time, and knowing the last date I synced it to iTunes or even plugged it in would be HUGELY helpful in helping me to maybe locate it. IS there any way to see this information (the date specifically) anywhere on my computer dated in any file?
I Did look at devices and the iPod wasn't listed there, (only my more recent iPad and iPhone as backups) so I'm assuming maybe this wasnt an option in earlier versions of iTunes at least when I last had that sucker plugged in.
IIt's Moreso just killing me that I can't find it, and I KNOW it's one of a few places.
ANy help is great!
thanks!
ROb

Go here for instructions.
iFixit: The free repair manual
If your iPod got wet, put the whole iPod in a bag/container of rice and see it and leave it for days.
How to fix a wet iPod or iPhone | eHow.com

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to differentiate between R12 gl records and 11I?

Hello all,
is there any way we can tell if a record is r12 or 11I aside from basing this on when we upgraded? We run reports that use reference_XX data from the g_je_lines table. The references have changed for R12 so we need to get the required data 2 different ways.
Thanks.

You can use je_header_id.
Since it is sequential, you can say je_header_id >= x is R12.

Is there any way to synch mail on two Macs so it doesn't have to be read twice?

Is there any way to process mail once instead of having to go through it again on each device? If you read or delete a message is there any way to have this synched on other devices?

Use ones that do :-)
Any service that does not provide IMAP, in my opinion, is not a service you want.
I suppose the alternative is to use webmail. Yuk.
Grant

Is there any way to toggle between languages in 10.5.8?

I write emails in Japanese {Hiragana and Kanji) a lot but I need to frequently transfer between English and Japanese for that.
On an older OSX version there used to be a way to toggle between selected languages using the space bar and another key (I think it was the Apple key) but that doesn't work in 10.5.8.
Is there another way to toggle selected languages in 10.5.8?

Someone (called rick) made a video tip on this.
http://www.tiptrickmod.com/mac/how-to-switch-between-languages/

My Daughter has an Ipod and when I set up the account before giving her the gift for Xmas I set it up under my email address, now I have an iphone 4 and I want to have my own account for itunes. Is there any way 2 do this w/ two separate accts, same email

My daughter got an Ipod for Xmas and I set up the apple account before hand & used my email address to set it up, now I have purchased an Iphone 4 and I want to have a separate itunes for my music.... is there a way to have two separate itunes accounts under the same email address?

Thanks. I have my iPad on my lap and her iPod in my hand. We can FaceTime each other but it won't let either of us message each other. I know mine is activated as I use it frequently. I have activated hers as well. Maybe I will put it in the too hard basket for tonight, sleep on it and try again tomorrow.

HT2513 Is there any way to sync between laptop, desktop, iPhone and iPad without using the iCloud?

I want to sync my iCal between all my Apple products but this doesn't seem to be possible?
It all used to sync with MobileMe, but I didn't upgrade, so it stopped syncing.
If I use a 3-rd party calendar, say Google Calendars, in my iCal would that work?
From what I can tell, I can sync from one machine to my iPhone via iTunes, but that's all...
Thanks, Heather

Because apps on iOS devices are isolated from one another ("sandboxed") such an app would not be possible.
I recommend "SelfControl". It takes a little while to learn to use but it works on any platform.

Is there any way to see the last local of my phone after the 24 hour time frame post email notification?

Is it possible to see the last location of my iPhone if its more then the 24 hr time frame after the notification email was sent?

transon wrote:
not sure I understand. You're spending your own money to buy a Tivo to use a service Verizon provides? Like instead of expecting them to keep your equipment up to date? (or at least allow you options equal to all other Verizon customers)
I have one TiVO HD now, and adding another would be great. Have you ever used a TiVO guide and actually got what you wanted to record? I pay TiVO $9.99 a month because my commitment is up, and Verizon $3.99 a month and get everything but Widgets I don't want. VOD they charge to much for, Remote DVR programming that only works when you don't need it. I have a 1TB internal drive I installed. Get my point?
Under $15 a month and does everything I want. I thought I missed the VOD untill I got it back for 2 months and decided I didn't need it. Multi Room, don't need it. Tried it once and canceled it. The only reason I have MRDVR now was to get the discounted HD boxes which they do now anyway. Shame they started that a month after I picked up the VZ DVR.
I did sugest that Verizon partner with TiVO and cut their development cost, and that was given a not likely response. Yea if Verizon offered a TiVO with the guide TiVO provides, TiVO VOD options, Verizon VOD options, Verizon Widgets, I would give Verizon $20 a month no problem.
I had a Verizon 6216 DVR for 4 years, a TiVO still for over a year, and now a 7216 for about 2 months. I like TiVO. Sorry Verizon.

During diction, is there any way to differentiate between the number "2" and the word "to ?

:

Well, what you have just been witness to is the lack of A.I. Without AI, a computer cannot properly comprehend certain convesational criteria.
Humans and other animals do not take actions or words at basic face value. They apply learned data from past experiences to better match the context of the actions or words presented to them. Once their brain settles on a % of correctness, it spits out a response value for it. Computers don't currently do that... at least not yet and those that have wannabe AI logic on them still have a hard time making the right decision. For the most part, they go with face value based on programmed parameters that are always applied the same way.
It's like the thermostat in your house. It's been told that if it's below a certain temp it needs to kick the heater in, if it's above a certain temp, it needs to kick in the AC. But, if the temp is below a certain value and you just happen to have a sweater on which is keeping you warm, the termostat won't know that it's OK for it not to turn the heat on to warm you up. It's a crude example, but you get the idea.

Is there any way to compare between last two activation of a Transformation

Similar Messages

Maybe you are looking for