Is there any way to connect an iPod nano (Fifth Generation) to an older Mac

I am looking to get a new iPod nano to replace my Mum's Third Generation iPod. However, she has an older iMac G4 with USB 1.1 ports. Is it possible to make the iPod nano work on this machine? Is it possible to get an adaptor to connect the device to either the FireWire or Ethernet port? Or can the iPod be fooled into thinking the USB 1.1 port is actually a USB 2.0 port? She really doesn't care if syncing is slow.

There are no adaptors to convert from USB to Firewire.
Syncing might not only be slow, it could time out so you may need to manually manage the music on her computer and load a small set of songs at a time. You probably will not be able to load movies, etc. and even photos could cause a time out.
Is your Mum's old iMac possibly running Panther (10.3.9). If it is she won't be able to use the 5th Gen Nano at all.

Similar Messages

  • Is there any way to update an ipod touch 4th generation to ios7?

    Is there any way to update an ipod touch 4th generation to ios7?

    No.
    The compatible devices have been posted on Apples website since early June

  • Is there any way to connect an ipod Shuffle to a 30 pin ipod connection?

    Is there a way to connect an ipod Shuffle to a device with the usual 30 pin ipod connection?

    There is not.
    B-rock

  • Is there any way to connect a 5th generation i pod touch to the BOSE sound dock series ii digital music system? i just brought both for christmas and the bose series ii doesn't allow me to dock the new 5th generation i pod touch?

    is there any way to connect an iPod touch 5th generation to a BOSE soundock series II?

    One of thes shuld work
    Lightning  Adopters
    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

  • HT204387 is there a way to connect my ipod touch via bluetooth to my laptop? keeps saying bluetooth peripheral device not found

    Is there any way to connect my ipod touch to my laptop that is running Windows 7? I've tried and tried and very time it will connect but then when it goes to download the drives an error pops up saying "bluetooth peripheral device not found".

    The bluetooth is largely meant for speakers and keyboards, not data transfer.

  • I was given an 80gb ipod classic formated with mac os. Is there any way to connect it to my windows pc so I can transfer the song to my library?

    I was given an 80gb ipod classic formatted with mac os. Is there any way to connect it to my windows pc so I can transfer the song to my library? When I try to connect to my pc I get a message asking me if I want to format the drive. I want to try to save the 15000 songs that are already on the ipod. Any suggestions?

    The iPod and iTunes are designed so that you cannot transfer music on an iPod to another iTunes Library. This is because the 15,000 songs do not belong to you and you have no legal right to keep them.

  • Is there any way to charge an iPod Touch while connected to another device?

    I'm using an iPod Touch connected to a pico projector (which is plugged into the wall), which of course limits the time I can run a presentation to the battery life of the iPod. Is there *any way* to charge the iPod while the connection port is in use (or otherwise connect it to A/C power)? I'm looking for any and all workarounds, though connecting it to a computer as a go-between is not an option. I'm using the Microvision SHOWWX pico projector, if it makes a difference. Thanks!

    Aha - this Composite video a/v cable solved my problem. Not sure why I had such difficulty finding this solution. http://store.apple.com/us/product/MC748ZM/A

  • Is there any way to make my iPod THE iTunes Library?

    Is there any way to make my iPod THE iTunes Library? I would like to free up all the space my iTunes Library takes up on my MacBook Pro, so I was considering purchasing an portable external hard drive to hold my iTunes Library…then it dawned on me… why shouldn’t I just be able to use my iPod for this? But not as simply a hard drive, but be able to access my songs on the iPod the same as I do now?

    You can delete all the songs from your computer and just keep them on the iPod by changing the update option of your iPod to "manually manage music and videos". In manual mode you can connect and play the songs from your iPod through iTunes on your computer. You can get details here: Managing content manually on iPod
    One major word of caution. If you delete songs from your computer and have no back up other than the iPod you will risk losing them permanently if your iPod fails or you find you have to restore it to solve a problem (and that's a very strong possibility). You should reconsider your original idea of investing in an external hard drive to store/back up your music. Alternatively at the very least back up songs you can't replace such as iTunes downloads to CD or DVD. Forum member Buegie has compiled a very extensive procedure for backing up your music which you'll find at this link: Backing up iTunes
    Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

  • Is there any way to restore my iPod if iTunes won't recognize it?

    I bought my husband a 30 gig ipod for Christmas and gave it to him early. Last night I bought and installed a video converter so that he could watch movies on the ipod. This morning when he updated the device with a new video and tried to play it, the screen turned green with little black squares. Itunes does not recognize that the ipod is connected to the computer and I can't turn the ipod off. Is there any way to restore the ipod if Itunes won't recognize it?

    Try this, hold the middle button and the menu button for 10 seconds while it is plugged into the computer. See if it will come back to life. You may have to try this several times. Give it a try.

  • Is there any way to find my ipod if stolen

    is there any way to find my ipod if stolen

    Change your iTunes (Apple ID) password along with any other password that was stored in the iPod.  If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number).  If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
    The "Find my..." function is pretty much useless if the device is in the hands of a thief.  All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
    The only real protection you have is with the personal information on the device rather than the physical device itself.  This requires action before the device is lost/stolen.  If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • Is there any way to reset my ipod, delete all content manually w/o itunes?

    My ipod is just jacked. I'm thinking that I'm going to have to send it off to be repaired. I would like to delete all my photos, music, etc before I send it off.. is there any way to modify your ipod without conecting to the pc? It will not connect to itunes and it is not recognised by any pc I try it on.
    THX!!

    This is from a previous post I did earlier. This also cleans the iPod out without wiping the firmware. Your iPod may not be toast after all.
    I was having the same problem as a lot of you where iTunes did not recognize my iPod. Now it does. Here's what I did.
    Disclaimer: I am no computer expert, just read ALOT of posts and figured my problem out.
    First problem I was having was that my cpu wasn't seeing the iPod as a mass storage device or iPod, just "removable disc". This was due to having my usb printer on. It was hogging resources I guess.
    Still didn't work in iTunes and locked it up. Reset using the iPod (whre the Apple logo comes up and have to select language initial screen)
    My problem included the following:
    When I looked at the "about" list on the iPod it said "Songs: 0, Capacity: 0, Format Unknown". Nothing there so the computer wouldn't read it I guess. When I right clicked in My computer/J:removable disk and got to the list with "properties" (took a while but it finally came up) it said the format was RAW, and there were 0 bytes on the iPod.
    This is the fix. On the same menu(removable disk - right click) there is selection called "Format..". Hit that and it should bring up a window to format the drive. Make sure it's set on "default Setting - or something like that", FAT32 and that the "Quick Format" is unchecked. Hit format and wait for it to finish.
    After I did this the computer shows the iPod and iTunes recognizes it and off I went on re-syncing all of the music in my playlist.
    Oh, and it did NOT delete the firmware in case you were worried like I was about that.
    Hope this helps!

  • Is there any way to Sync one ipod to two computers?

    I have recently bought my self a new laptop, and I was wondering if there was any way I could sync my fifth generation ipod to it and my old computer with out deleting all the songs on my ipod. Is there any way to sync an Ipod to more than one computer at a time, with out it having all the songs, or videos deleted? If so how do I do it?

    See this.
    How to use an iPod with more than one computer.

  • Is there any way to connect disabled iPad to network via external software?

    Hello,
    My iPad is disabled because of a Bluetooth mishap (my keyboard in my coat pocket tried to enter my password too many times). So I can't enter my password on the screen. Unfortunately I didn't back up the last few weeks of documents in any way, via either iCloud or syncing. And I just can't erase all the work I've done--it's irreplaceable to me.
    Is there any way to connect the iPad to a WiFi network through external software, maybe using the lightning connector?
    I ask because in iCloud I marked the iPad as Lost (in Find My iPhone), so I may get another chance at entering my password if the iPad can get online to receive the signal. But because it's disabled it won't connect to a network.
    Many thanks for any help!

    Not a big surprise unfortunately...  time to get an iPhone I guess!
    Thanks for the answer Sir!

  • Is there any way to delete an ipod from an apple account on imessage?

    is there any way to delete an ipod from an apple account on imessage?

    Just what do you mean? Go to Settings>Massages and delete the Receive At email address.

  • Is There Any Way To Connect My Mid 2009 MacBook To My Standard Definition TV.

    Is There Any Way To Connect My Mid 2009 MacBook To My Standard Definition TV With Scart, S Video & Composite ?
    I Was Going To Connect It With The Apple Video Adapter But Then I Looked At This Web Page That Said It Won't Work With My Model Of MacBook.
    http://support.apple.com/kb/HT3235?viewlocale=en_US&locale=en_US
    I Was Hoping Someone Could Sugest Something Else Pehaps Using The VGA Adapter Plus The Video Adapter.
    If Nesacerry I Can A Component Video Scart Adapter.
    Can Anyone Help ?

    I connect an XBox 360 to my LED Cinema display with the Belkin AV360 Mini DisplayPort Converter. I can't imagine why it wouldn't work with the Apple TV. It is limited to 720p, however.
    http://www.amazon.com/Belkin-Mini-DisplayPort-Converter-iMac/dp/B00477ORBK/ref=s r_1_7?s=electronics&ie=UTF8&qid=1316343901&sr=1-7
    I hope this helps.

Maybe you are looking for

  • Is there a way that you can convert an edited movie to quicktime if you shot on a T2i in 60 FPS?

    I realized that I shot a project in 60fps on a T2i without my knowledge and I converted it back to 24 fps in streamclip. Then when I went to reconnect the media, there were no clickable clips...I first ran into this issue when the movie converted to

  • Error when starting application server

    after installation of SAP NetWeaver 7.01 ABAP Trial Version on windows Vista, i got the following error when I try to start the application server: The MaxDB Database Starter, Version 7.7.04.23 Copyright 2000-2008 by SAP AG Error! Connection failed t

  • Upgdating GeForce 8800 GT Drivers?

    Found it. Sorry. Anyway to delete this post?

  • Why isn't the iPhone camera full screen?

    iPhone 6 camera on iOS 8 is amazing but the advantage of bugger iPhone screen isn't taken in the Camera, I think full screen camera for iphone would be better.

  • Metro ethernet configuration

    Months agao I had a 10MB metro ethernet link installed between two of my locations within 3 miles of each other. The link is fiber with a conversion module to copper, 10MB ethernet. I have the link on one end coming into a fastether port on a cisco 2