Is There Any Way To Control My iPhone With My iMac?

Hello. Firstly, I'd like to say that I broke my screen, so I can't download apps and such.
Anyways.. I have an iPhone 4S which I actually bought about a year ago. It broke about 4-6 months ago, and I've been using a different iPhone since. Unfortunately, I can't access anything on the phone, but I'd still like to use it. Is there any way to remotely control it through my iMac?

Read https://discussions.apple.com/message/18530225#18530225

Similar Messages

  • Is there any way to save an iphone with water damage?

    Is there any way to save an iphone 5 with water damage? I know older phones you could some times use rice to dry it out.

    1, Place in ziplock bag with dry raw white rice for a week.
    2, When that doesn't work take to Apple and purchase out of warranty replacement.
    3, If you have already turned on the power the damage is done so just proceed to step 2.
    Allan

  • Is there any way to control an iPod with a lock via USB cable?

    I have an iPod touch 4th generation, but I dropped it. The touchscreen no longer works, which is most likely a hardware error (I've tried resetting it). I plan to get a new device, but before that, I would like to be able to unlock it to access certain files and transfer codes inside. I know the lock password to my iPod; is there any way I could control it with my computer?
    Thanks.

    You may be able to get some info from the restored/erased iPod by:
    How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      
    http://www.pcrecoverytools.com/ipod-data-recovery.html
    -iPod touch Deleted Photo Recovery Tips You Should Know

  • Is there any way to restore an iPhone with a shattered screen, broken home button, with a passcode and no access to computer most recently synced with?

    I have an iPhone with a completely shattered screen (the display wont even show up, just a black screen), the home button does not work. I have a passcode on the device, but I have not synced the device with my current PC (I got a new computer and don't have any of my syncs from my old computer). I recieved my replacement device today, and want to back up the iphone before I activate the new device - but I get prompted to put in my code on the phone before it will allow me to back it up. As the display is completely black and does not appear to respond to touch, and the home button is broken so I cannot put it in recovery mode... What do I do? If I took the phone in to my carrier's store, would they be able to override the passcode and put my information on my new device?

    shannon_newb wrote:
    If I took the phone in to my carrier's store, would they be able to override the passcode and put my information on my new device?
    Sorry, no. Given the present state of your phone, your data is unrecoverable.

  • Is there any way to control the volume on my Apple TV?

    Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
    First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
    Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
    The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

    Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
    It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

  • HT204266 I erase all application of my iphone 4 with erase restore and now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file i just want my i phone ok and work smoothly as new p

    Hi,
    I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.

    See Here  > without the Backup  >  http://support.apple.com/kb/HT4137

  • TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    Doubtful - why did the Remote app lose connection?

  • I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.

  • Tell me please, is there any way to unlock my iPhone, if the contract is ended and I moved to Ukraine

    Tell me please, is there any way to unlock my iPhone, if the contract is ended and I moved to Ukraine

    1. Try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    2. If that doesn't solve the issue, backup the device and restore it as new.
    In that case, use: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
    If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
    Good luck
    Stijn

  • Is there any way to locate your iPhone even though it is dead or offline?

    Is there any way to locate your iPhone even though it is dead or offline?

    Other than by physically looking for it, no.

  • Is there any way to control automator through voice commands?

    is there any way to control automator through voice commands?
    Im simply trying to program my macbook pro early 2011 8gigs ram to resound to voice commands using automator but I haven't found any discuss on the subject.

    I have some AppleScript that expects a Pages (v5.2.2) document opened. It will then then speak the document name, and the count of words in the document. Or, I can trigger Speakable items and tell it to, "Switch to Pages" which it does immediately, because this is part of its repertoire of built-in commands. Then speak Word Count?
    In Automator, I created an Application, in which I dragged/dropped the Library > Utilities > Run AppleScript action into the workflow window. I replaced the AppleScript boilerplate with my existing AppleScript code that speaks the word count, and saved the Application into <login dir>/Library/Speech/Speakable Items folder as Word Count? (without the .app extension). It can also be saved in the Application Speakable Items > Pages sub-folder under the general Speakable Items folder.
    Next, I turned on Speakable Items in System Preferences > Accessibility > Speakable Items.
    It took several tries to get a spoken result from the Automator application, but it did work. Even with a calibrated microphone, and speaking about 18 inches from it. About 2 successes for ten tries. If I just put the AppleScript (without extension) in the same folder, my success rate would improve to 5/10. You may grow very weary of the repetition necessary to get Speakable Items to work. A small pink text banner also appears with the spoken content in it — below the Speakable Items monitor on the screen.
    Automator is scriptable. This means that in AppleScript, you can dynamically build an Automator workflow, and then execute it.

  • Is there any way to check an iPhone 5 for a virus?

    Is there any way to check an iPhone 5 for a virus?

    oxdog007 wrote:
    What causes the screen to enlarge to the point you can't navigate the phone?
    Double tapping the screen will cause it to zoom. Go to Settings - General - Accessibility - Zoom = Off??.

  • Is there any way to restore an iphone to factory setting without the apple id previously used on that phone?

    Is there any way to restore an iphone to factory setting without the apple id previously used on that phone?

    murphysandra1 wrote:
    Is there any way to restore an iphone to factory setting without the apple id previously used on that phone?
    Nope...
    iOS 7 Activation Lock
    http://support.apple.com/kb/PH13695?viewlocale=en_US

  • HT4623 I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

    I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

    No.

  • Is there any way to get my iPhone 4S from Verizon to work in Hong Kong?  So far it only says cannot activate cellular data

    Is there any way to get my iPhone 4S from Verizon to work in Hong Kong?  So far it only says cannot activate cellular network.  I have cleared all settings, turned off CDMA...etc and still nothing.

    If you are there now, there is nothing you can do.  Before going you should have talked with Verizon, they have international service programs they can activate, but it has to be before going.

Maybe you are looking for

  • How do I change the "Default Directory" associated with my subscription?

    I was recently added as an administrator for a client's Azure subscription.  This has caused his account AD to be the default directory I see when I log in.  So every time I log in I have to open the Subscriptions menu and change the FILTER BY DIRECT

  • Conversion from Word to PDF is unreadable to others

    I have had this problem a couple of times: I save a word 2007 document as a 97-2003 doc and then convert to pdf using the print command. When I email this to others, sometimes the words are "jibberish" as one person told me and sometimes the page loo

  • Urgent ORA-00376: file 11 cannot be read at this time

    Does file 11 needs media recovery ? If yes what are the steps to do that ? SQL> select * from v$recover_file; FILE# ONLINE ONLINE_STATUS ERROR CHANGE# TIME 11 OFFLINE OFFLINE 5968032723 02/07/2007 12 OFFLINE OFFLINE 5968032723 02/07/2007 13 OFFLINE O

  • Oracle Support in Android OS

    Ok, it is a question, I donwload the Oracle Support for android OS, I would like to know what is the account for to access? I can't to access with my oracle account . please explain me

  • Brush lag in CS2

    I know most people have gone on to CS3/4 but I'm still with CS2 and WinXP (SP3). I've been noticing the last few weeks my brushes are kind of jittery and lag just a tiny bit making small accurate brush strokes a bit of a pain. I can't think of anythi