Is there any way to convert video files and keep my project in Final Cut Pro 7?

I am currently editing a project, and have been having multiple issues with freezing while editing. Upon doing some quick research, I learned it is bcause my clips are in the h.264 format, which is not a good editing codec. Is there any way to change the codec of the videos and keep the project I have?

You might need to relink the timeline to the new media. Just take the H.264 files offline, and reconnect to the new media. If you media managed the sequence, it'd relink. But then you are only converting the files used in the sequence, not all your media.

Similar Messages

Is there any way to recover lost files and folder? I shared my desktop and suddenly I lost every single file in it.

Is there any way to recover lost files and folder? I shared my desktop and suddenly I lost every single file in it. I have a MacBook Air.
Processor 1.8 GHz Intel Core i5.
Memory 4 GB 1600 MHz DDR3

From your backup

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Does Final Cut Pro X support all video files as did its prior version Final Cut Pro Studio?

Hi,
Use to have a Mac Pro and had Fina Cut Pro Studio. Now I have just got a new Macbook Pro (Lion), and have just purchased the new Final Cut Pro X from the App store. I am having problems importing 3gps files into FCP X. I never had a problem with the $1000 version of studio. Does the new FCP X have limitations on what video files are compatible with it? do I need to purchase additional plug-ins etc???
Ta
Zeb

Really depends on the specific file type you want to work with. FCP X does not support every single flavor of video FCP 7 did, so it's not a huge surprise if the file you're using is not supported. That said, there's plenty of free third party tools you could use to convert it to a regular QuickTime ProRes file that FCP X would accept. For example- http://www.squared5.com/ would most likely be able to load it. Try and let us know. And if that doesn't work please provide more details about the 3gps file you're using.

HT4061 Is there any way of not using iTunes, and keeping it off my system

Can we get rid of iTunes ,,,,, and stop using it

There is no other way to put content on your iPad without using iTunes. There is 3rd party software to let you copy media content and other data, but installing and syncing apps can only be done by iTunes.

I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them?

I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them or must I do it on another machine?
Kaibil

iPhoto used to support the PCD format up to a few years ago. It's extremely frustrating that Apple decided to no longer support this format and now I'm directed to pay nearly $40 for an app that will (GraphicConverter 9). Did Lemke Software make a deal with Apple so we'd have to pay a premium for a very overpriced converter? And, how are decisions like this supposed to encourage the use of iPhoto?
Apple users already pay a premium to use a Mac. Obstacles like these eventually destroy loyalty to the Apple brand. Just ask Microsoft how their back room deals that exploited their customer base worked out for them.

Is there any way to convert the ImportObject into an image file ?

I have converted a FM document into MIF file format. FM has a grapic imported by copying into the document. In the MIF file I can see the image like the following,
<ImportObject
<Unique 1001019>
<Pen 15>
<Fill 7>
<PenWidth 1.0 pt>
=TIFF
&%v
&II*\x00080000001000FE000400010000000000000000010300010000006009000001010300010000…..
Is there any way to convert the ImportObject inside the mif file into an image file ?

Error 7103,
Regarding Note A and Note B... The Downsample dropdowns list three variations of Downsampling TO, each corresponding to a different downsampling method. When you select one of the Downsampling TO options, then the pixels per inch box allow you to specify the dpi of the downsampled image, the one after the downsampling.
When you select Off, which means do NOT downsample, then the pixels per inch box is meaningless. Maybe it would be a nice interface feature to disable it, but that is another issue. In any event, OFF ignores any value in pixels per inch.
Whenever you import an image into your publishing program (FrameMaker, InDesign, or whatever) and scale it, one can think of the scaled image as having a physical dpi, the number of pixels per physical inch on the "paper." When you specify downsampling in Distiller, the number you specify is most likely less than the physical dpi of the image in the document. It is probably meaningless to specify a number that is larger. I am guessing (and this is a guess) that Distiller does not UPsample images. I have never tested it.
I use 1200 for image recovery.
I assume you are talking about recoverying an image embedded in (copied into) the publishing document. I believe it is sufficient simply to turn downsampling off to create a PDF with the image at the resolution as embedded in the document.
No, one of the settings is to Determine Automatically, which uses the resolution of the image IN the PDF.
Where is that found?
It is NOT in Distiller. It is in Acrobat Professional. (It may or may not be in Acrobat Standard or Acrobat Reader; I do not have them, so do not know.)
The original poster wanted to recover an image copied into a Frame document file. My method is to create a PDF using a Distiller joboption with ALL downsampling and ALL compression OFF. Presumably the image is put into the PDF with all the pixels it has in the Frame file.
THEN in Acrobat PROFESSIONAL, export the image with the setting Determine Automatically. I am presuming (never tested it) this exports ALL the pixels that the image has in the PDF file.
Van

I have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

i have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

Only your service provider can unlock the phone. Check with the provided.

Is there any way to open .mts files in Qicktime and FCPX?

Is there any way to open .mts files on the Mac? I am reffering ti opening them in Quicktime and in FCPX. My camera costs a LOT, and I think it's ridiculous that I can't open these files. I can't even find a decent conversion tool to do it for me. Please help!

I just checked this link and it's looks like FCPX have no problem to open it.
http://www.fileinfo.com/extension/mts
.mts is also called AVCHD.
I also check FCPX Documentation here : http://help.apple.com/finalcutpro/mac/10.0.6/#ver2833f855
And it say it can support AVCHD videos.
VLC also support it for watching the video and anyway Quicktime X is useless with many codecs.
Check again to import files in FCPX as i can't test i don't have any .mts files.
Hope this help.
You can read this also if you want to convert them : https://discussions.apple.com/thread/1412182?start=15&tstart=0
I will say it's better to use Handbrake, anyway it's what i use.

Is there any way to create a file compatible with Premiere Pro

Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

Consternation
The important information that I do not see mentioned nor offered by you.
1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
Adobe Premiere Pro Help | Supported file formats
This may or may not be possible depending on damaged projects or outdated elements.
2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
with AVI file extension, under Publish+Share/Computer/AVI
with MOV file extension, under Publish + Share/Computer/QuickTime
And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
Remember, there is more to an export than just its file extension. Know your other export properties as well.
In many cases, you can customize the export settings to suit your requirements.
Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
I would be glad for the opportunity to help you with this issue, but details are needed.
Looking forward to your follow up.
Thanks.
ATR

Is there any way to convert the selected rows to text in javascript??

Hi All,
I have place some word file to indesign cs 5.5 it is almost in one table, i need to separate the text from the real tables, Is there any way to convert the selected rows to text in javascript??
If there is no way to make that, any one can help me to make a script to cut the selected rows and place it in privies pointer of the table to make it independent table and after that convert it to text ?

This insert the rows contents after the table instead of being before:
for (var r = app.selection.length - 1; r >= 0; r--) {
    for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
        for (var u = app.selection[r].rows[t].cells.length - 1; u >= 0; u--) {
            for (var c = app.selection[r].rows[t].cells[u].paragraphs.length - 1; c >= 0; c--) {
                app.selection[r].rows[t].cells[u].paragraphs[0].move (LocationOptions.AFTER, app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset));
                if (c != 0)
                    app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\r";
            if (u != 0) {
                app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\t";
            else {
                app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\r";
for (var r = 0; r < app.selection.length; r++) {
    for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
        app.selection[r].rows[t].remove ();

Is there any way to show the file name super imposed on the slides?

Is there any way to show the file name super imposed on the slides in Premiere Elements 9?
I am setting up pictures as slide show along with some movie clips but wanted the desctiptive file names appearing with each picture.
Thanks!

Yes. In Timeline mode, you add it to an upper video track as a title.
I show you the basics of titles in the Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

Is there any way to get the files from other computer ?

Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
Namanc

Bro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
    if(getCmd.startsWith("FileName")) {
            String[] splitData=getCmd.split(":");
            this.getFileName=   splitData[1];
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("FileSize")) {
            String[] splitData=getCmd.split(":");
            this.getFileSize=Long.parseLong(splitData[1]);
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeOpen")) {
           //data mode open so receive data
          receiveData();
          outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeClose")) {
          //close client socket
         getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
        //if ok found then do other or show error message
    if(sendCmd("FileName:"+getFileName)) {
        if(sendCmd("FileSize:"+getFileSize)) {
            if(sendCmd("DataModeOpen")) {
               bout.write(getBytes);
            } else {
               showError(3);
        } else {
               showError(2);
   } else {
        showError(1);
}i think it will help u

Using pages, I saved the wrong file thereby overwriting the file I want. Is there any way to get the file I want back?

Is there any way to recover a file if you have overwritten it?

When I do that: Pages>Revert to > I don't get a chance to "Browse all Versions" Instead it says, "no Document"

Is there any way to use a file transfer protocol to upload files to icloud?

Is there any way to use a file transfer protocol to upload files to icloud?

Unfortunately, no.
You will need a 3rd party web host to upload your websites to. Depending on the version of iWeb you are using you have a couple of publishing options:
iWeb ’09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like “www.YourDomain.com/sitename/Home.html )
iWeb ’08 you can publish your website to a local folder
Basically all Web Hosting companies are iWeb-compatible.
If you’re looking for a good hosting I would recommend IX Web Hosting I have been using them to host my own websites for several years now and that their customer support is awesome too.
http://jeffnitschke.com/IXWebHosting.html
http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
"I may receive some form of compensation from my recommendation or link."

Is there any way to convert video files and keep my project in Final Cut Pro 7?

Similar Messages

Maybe you are looking for