Is there any way to create a custom timecode in Premiere Pro?

I mean going beyond the standard controls in the Timecode effect.
I have a video project where I need to actually show time elapsed to demonstrate a process happening in a timelapsed video. In other words, this isn't just for editing/syncing purposes; the final video needs to display how long the events in the video are taking to complete, like a chronometer, and I want more control over its appearance.
For example, I want to strip out the Hours and Frames so all I have left is MM:SS in the display, which I've fudged for the moment by putting the timecode in a seperate sequence and cropping it. I'd also like to be able to choose the color, font, etc. of the digits display and to put something behind it other than the built-in semi-transparent gray background.
I almost need to be able to insert the timecode into a Title as a special character, like you'd do for page numbers in a text document.
If this simply isn't available in Premiere Pro but there happens to be a solution in, say, AfterEffects, or any other CC software, I would be fine with that.

Simple to to in After Effects, you can control a text layer with expressions scripting to get it to do whatever you want.
e.g. http://www.motionscript.com/design-guide/up-down-clock.html

Similar Messages

Is there any way to create a file compatible with Premiere Pro

Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

Consternation
The important information that I do not see mentioned nor offered by you.
1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
Adobe Premiere Pro Help | Supported file formats
This may or may not be possible depending on damaged projects or outdated elements.
2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
with AVI file extension, under Publish+Share/Computer/AVI
with MOV file extension, under Publish + Share/Computer/QuickTime
And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
Remember, there is more to an export than just its file extension. Know your other export properties as well.
In many cases, you can customize the export settings to suit your requirements.
Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
I would be glad for the opportunity to help you with this issue, but details are needed.
Looking forward to your follow up.
Thanks.
ATR

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
I tried using flickr and powerpoint as a work around but no luck. I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file. I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set. It still displays everything, pics and the wmv file at the default 3 sec.
I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

Welcome to the Apple Community.
No that's not possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

Is there any way to create admin role only for one resource.

Hi all,
I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
Is there any way to create admin role only for one resource?
I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
Please suggest,
thanks

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

Is there any way to create new decorations in LabVIEW 7.1?

I've been reading the discussion threads, and now have a pretty good idea about how to programmatically manipulate the color and visibility of LabVIEW decorations. The available decorations, however, are fairly limited. Is there any way to create custom decorations?

You can't create new decorations, but you can import vectoric images (from Office, for example) and use them as decorations (although you can't control their color).
See here for some examples.
Try to take over the world!

Is there any way to save a customized toolbar layout?

Is there any way to save a customized toolbar layout?

Printing the layout helps, I can pretty much do it from memory..
Once you have '''freshly generated the layout''' you want
# Open your profile folder by typing about:support int the location bar (or Help > Troubleshooting information...)
# Click on Open containing folder
# use File > Exit or "Firefox" button > Exit to get out of Firefox (Not the "X" in upper right corner as that just closes the Window)
# in your profile f older select localstore.rdf and copy ("Ctrl+C") then paste it aback to make a copy, repeat to create at least one more copy, The original and "localstore - Copy.rdf " and "localstore - Copy (2).rdf" will all be the same, about 4KB to start with. (not 18 KB not 76 KB)
# bring Firefox back up.
''Freshly generated ''means rename or delete the original localstore.rdf while Firefox is down, restart Firefox and customize your toolbars as you want them.
If you have a problem with a corrupt localstore.rdf bring Firefox down and in your profile directory delete or rename the localstore.rd then rename a copy to localstore.rdf
Reference: http://kb.mozillazine.org/Corrupt_localstore.rdf see references to backup copy, you should, of course, be taking periodic backups of all your personal data, and for Firefox that includes your profile.

Is there any way to create a VMvmare server cluster?

Hi,
I have two machines which don't support install ESXi, these machines are running centos 5 with no X and I installed vmware server 2.0.
My question is, is there any way to create a vmware server cluster like is possible create in ESX?
I know in ESX once you create a cluster, the resources are increased since resources are added. Is there any way to do same thing with vmware server 2.0?
Also is there any other option for my machines, I don't want to install X since the machines don't have much resource.
Thanks in advance.

Welcome to the COmmunit - With VMware server each environment functions independently and there is no way to pool resources as you can with a DRS cluster - and remembering even in a DRS cluster the VMs swill only run on a single host at a time as they would in VMware Server machines/
Also just because it is not suppported does not mean you will not be able to create a VM with an unsupported OS -

Is there a way to create a custom shortcut key to paste my email address? I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

Is there a way to create a custom shortcut key to paste my email address? I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

There are multiple ways to do similar things. One, built into the system, is to use text replacement. See:
http://www.tuaw.com/2009/12/31/mac-101-making-text-replacement-work/
There are other programs you can buy that can do the job in different ways, such as TextExpander. You could also just create a clipping file by dragging your e-mail address to somewhere like the desktop, and then you can simply drag that file to wherever you like to insert your e-mail address there.

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to create a wifi hotspot for my macbook using my IPad?, Is there any way to create a wifi hotspot for my macbook using my IPad?

I am going to a lake cabin in Northern Minnesota for a week and need to get wifi for my Mac. Is there any way to create a wifi hotspot using my Ipad so that I have internet service for my laptop?

No, iPad can become a hot spot, but if you have an iPhone, it can tether if you have a data plan that incudes the tethering option. With AT&T for example, you can add tethering for $20 month or for $45/month, you receive tethering and 4GB of data per month. If you have the unlimited data plan from AT&T you'll unfortunately have to give it up if you want to tether. You can also go to almost any carrier and purchase a MiFi unit which may work for you. Whether iw will work in Northern Minnesota is something only your carrier could answer.

Is there any way to create a system-wide variable?

Hello IDM gurus.
Is there any way to create rarely changing system wide variables that can be loaded at system startup that will be available to all users? For example, at IDM system startup, the variables would be read from configuration or generic objects and live in memory for ALL users as opposed to each workflow/user having to read the same variables when the workflow is run.
Any help would be appreciated.

That may very well be the answer I'm looking for. Is there a way for that to be available within the entire application instead of having to read it in each workflow?

Is there any way to create table of more than 30 char length name

hi all,
Please tell me is there any way to create table of more than 30 char length name in oracle 10g
Regards

Hi,
If you want table name to be more than 30 Char.
I am sure,your naming convention is not upto the mark.
Its not possible in 10g as well as in 11g.
Thanks
Yogesh Nagle
India

Is there any way to create discussion board using JSP

Hi! i'm doing a project using jsp is there any way to create a simple discussion board like the one here? can anyone who knows pls forward some links that teaches me how to do it step by step. Thanks for your help and have a nice day :)

From the UK! -- PC Plus, August 2000 Issue:
How to build a JSP Message Board
http://www.pcplus.co.uk/media/pcplus/pdf/166/pcplus.166.progworld.java.pdf
You'll get a nice 2-page pdf file, taken directly from the magazine
--Dave

Is there any way to create fields reports users can enter data into?

I am using Crystal XI to develop reports for my company and have not received any formal training on it. I'm learning it fairly well through the help files.
One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports. Most of the information is stored in the main program used by all employees, a very small amount of it is not. I have created sub-reports for each of the different types of costs that are tracked in the system.
Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system? I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed.
Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..." At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.

Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround?
If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
Sincerely,
Ted Ueda

Is there any way to create 3D PDF file without having the model tree ?

Is there any way to create 3D PDF file without having the model tree ?
3D communication is good but sometime we don't want the receiver to be able to study every components in model.
or any way to make the receiver cannot use model tree and measurement tool ????
Thank you very much

You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
- start Acrobat 3D
- drag & drop a CAD file
- click on 3D Annot to activate
- right-click on 3D
- select 'Edit in 3D Toolkit'
- 3D Toolkit launches
- click in 'Scene Tree' panel
- right-click on top assembly name
- select 'Tools->Collapse Hierarchy'
- select 'File->Save'
- select 'File->Exit'

Is there any way to create a custom timecode in Premiere Pro?

Similar Messages

Maybe you are looking for