Is there any way to create a file compatible with Premiere Pro

Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

Consternation
The important information that I do not see mentioned nor offered by you.
1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
Adobe Premiere Pro Help | Supported file formats
This may or may not be possible depending on damaged projects or outdated elements.
2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
with AVI file extension, under Publish+Share/Computer/AVI
with MOV file extension, under Publish + Share/Computer/QuickTime
And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
Remember, there is more to an export than just its file extension. Know your other export properties as well.
In many cases, you can customize the export settings to suit your requirements.
Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
I would be glad for the opportunity to help you with this issue, but details are needed.
Looking forward to your follow up.
Thanks.
ATR

Similar Messages

Is there any way to create a custom timecode in Premiere Pro?

I mean going beyond the standard controls in the Timecode effect.
I have a video project where I need to actually show time elapsed to demonstrate a process happening in a timelapsed video. In other words, this isn't just for editing/syncing purposes; the final video needs to display how long the events in the video are taking to complete, like a chronometer, and I want more control over its appearance.
For example, I want to strip out the Hours and Frames so all I have left is MM:SS in the display, which I've fudged for the moment by putting the timecode in a seperate sequence and cropping it. I'd also like to be able to choose the color, font, etc. of the digits display and to put something behind it other than the built-in semi-transparent gray background.
I almost need to be able to insert the timecode into a Title as a special character, like you'd do for page numbers in a text document.
If this simply isn't available in Premiere Pro but there happens to be a solution in, say, AfterEffects, or any other CC software, I would be fine with that.

Simple to to in After Effects, you can control a text layer with expressions scripting to get it to do whatever you want.
e.g. http://www.motionscript.com/design-guide/up-down-clock.html

HT4757 Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1? Is there any way to get my camera compatible with this computer?

Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1? Is there any way to get my camera compatible with this computer?

First Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that doesn't help apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Is there any way to create installation files using java

Hi,
can we create write any program to install our product in linux. I thnk we can do it using VJ++, but for windows.
thanq
chandu

can we create write any program to install ourproduct in linux.
Yes, you can write any program to install your
product in linux.Visual J++ might not really be the best choice though.

Is there any way to create 3D PDF file without having the model tree ?

Is there any way to create 3D PDF file without having the model tree ?
3D communication is good but sometime we don't want the receiver to be able to study every components in model.
or any way to make the receiver cannot use model tree and measurement tool ????
Thank you very much

You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
- start Acrobat 3D
- drag & drop a CAD file
- click on 3D Annot to activate
- right-click on 3D
- select 'Edit in 3D Toolkit'
- 3D Toolkit launches
- click in 'Scene Tree' panel
- right-click on top assembly name
- select 'Tools->Collapse Hierarchy'
- select 'File->Save'
- select 'File->Exit'

Is there any way to create a setup file Like Visual Basic

Hi,
I want to create a setup file of all developed foms and reports to install them to desireable location, is there any way to create a setup file in oracle, Like Vb.
Raza

I believe there is something from Oracle but it was frustratingly buggy when I used it a few years back and only worked via the Oracle installer.
Personally, I'd recommend something like Innosetup, which is freeware and a Windows-style installer much like InstallShield etc. so it'll create an executable setup file probably OK if they've already got the Oracle Runtime components installed.

Is there any way to create discussion board using JSP

Hi! i'm doing a project using jsp is there any way to create a simple discussion board like the one here? can anyone who knows pls forward some links that teaches me how to do it step by step. Thanks for your help and have a nice day :)

From the UK! -- PC Plus, August 2000 Issue:
How to build a JSP Message Board
http://www.pcplus.co.uk/media/pcplus/pdf/166/pcplus.166.progworld.java.pdf
You'll get a nice 2-page pdf file, taken directly from the magazine
--Dave

Is there any way to create fields reports users can enter data into?

I am using Crystal XI to develop reports for my company and have not received any formal training on it. I'm learning it fairly well through the help files.
One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports. Most of the information is stored in the main program used by all employees, a very small amount of it is not. I have created sub-reports for each of the different types of costs that are tracked in the system.
Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system? I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed.
Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..." At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.

Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround?
If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
Sincerely,
Ted Ueda

Is there any way, to create with Adobe Muse HTML-Mail Templates?

Is there any way, to create with Adobe Muse HTML-Mail Templates? or to convert the createt page to only html content? any other tool like an website copyer?
tanks for help!

Off the top of my head, you should be able to create mail templates in muse BUT it will require very basic html/css knowledge on your part. I am assuming you want to do just the signature?
Create the design you would like on one page, dont do any kind of styling in a master page. Then export the site into a folder. Open the html file with notepad/ textedit and then copy just the code for JUST the template. Throw it in you mail app of choice and it should work.
This seems like something that would be done alot quicker in dreamweaver in design view.
PLEASE NOTE: ^i could be completely wrong - but in theory this may work.

Is there any way to create a shadow in both sides of a box?

Hi,
is there any way to create a shadow in both sides (opposite) of a box? I just can create the shadow in one side..
If not, is that possible in CS6?
CS5.
Regards

You can definitely show an inner shadow on just one side of a rectangle. You just need to turn the blur down to 0 to prevent it from leaking to the nearby sides. Then set the angle to an exact multiple of 90, like 270 to put the shadow on the top side of the rect.
This file has some examples: http://johndunning.com/fireworks/scratch/Shadowed%20Elements.png
If you're trying to simulate a rectangle with different border colors or widths, this auto shape can make that easy: http://johndunning.com/fireworks/about/MultiBorderRect

Is there any way to create a style sheet in APEX?

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
Is there any way to create a style sheet in APEX any version?
I want to create a style sheet and use APEX report column link to it.
Thanks.
Cow

Well, if that is the case, then you'll need to do some PL/SQL programming to write a package to create all of that for you, then execute the package when the 'link' column is clicked.
After your package is written, change the attributes on your link column to be a URL instead of page in your application and call it like:
javascript:{MypopUp2('http://your.server.name/print/owner.package_name.sub_procedure?key=#COL01#',800,600);}
On my system, I created a new DAD and user just for this one purpose, to read an select the information in my report, generate the HTML to display the data, etc. without leaving a loophole someone could exploit to get direct data manipulation access. My report though is a form-type report of all the data from about 40 tables for that one 'master' record, with css formatting included. I'm not directly generating a css file based upon data within the database, but simply adding the css formatting into the HTML file my package generates.
Does this help your problem?
Bill Ferguson

Is there any way to delete duplicate files en mas within the new itunes program?

I've just installed the new itunes program on my laptop. I used the scan for media option to find music. Problem is almost every entry and there's several hundred of them is duplicated and in some cases triplicated within the itunes media library.
Question ... Is there any way to delete duplicated files en mas withing the itunes library folder?
Please don't tell me that I'm going to have to do it individually as that may take days.
Thanks

Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning
to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2

Is there any way to collect the file list from UTL_FILE_DIR.

I expect the use "Oracle supplied package UTL_FILE" to import our customer order shipments to table by XML format files. I already did the procedure to import one XML file into Table by DBMS_XMLSave.insertXML and UTL_FILE. GET_LINE. And it did work.
My question is :
Is there any way to collect the file list from UTL_FILE_DIR. (I put all import XML files into `/usr/tmp?, I want to get all file names from this folder and feed them into UTL_FILE.FOPEN.)
Thanks in advance

UTL_FILE_DIR is a very dangerous and deprecated parameter. Oracle very specifically recommends not using it. You should be using directory objects instead.
As for doing a directory listing, you can use Java stored proc. External procs/functions are not required.
The following sample shows how to use such a Java stored proc to insert the result of a directory listing into a session temporary table:
create or replace and compile java source named "ListFiles" as
import java.io.*;
import java.sql.*;
public class ListFiles
        public static void getList(String directory, String filter)
        throws SQLException
                File path = new File( directory );
                final String ExpressionFilter = filter;
                FilenameFilter fileFilter = new FilenameFilter() {
                        public boolean accept(File dir, String name) {
                                if(name.equalsIgnoreCase(ExpressionFilter))
                                        return true;
                                if(name.matches("." + ExpressionFilter))
                                        return true;
                                return false;
                String[] list = path.list(fileFilter);
                String element;
                for(int i = 0; i < list.length; i++)
                        element = list;
#sql {
insert
into directory_list
( directory, filename )
values
( :directory, :element )

Is there any way to create a VMvmare server cluster?

Hi,
I have two machines which don't support install ESXi, these machines are running centos 5 with no X and I installed vmware server 2.0.
My question is, is there any way to create a vmware server cluster like is possible create in ESX?
I know in ESX once you create a cluster, the resources are increased since resources are added. Is there any way to do same thing with vmware server 2.0?
Also is there any other option for my machines, I don't want to install X since the machines don't have much resource.
Thanks in advance.

Welcome to the COmmunit - With VMware server each environment functions independently and there is no way to pool resources as you can with a DRS cluster - and remembering even in a DRS cluster the VMs swill only run on a single host at a time as they would in VMware Server machines/
Also just because it is not suppported does not mean you will not be able to create a VM with an unsupported OS -

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to create a file compatible with Premiere Pro

Similar Messages

Maybe you are looking for