Is there any way to create this image in photoshop?

Is there any way to create this image in photoshop?  ,Any help would be appreciated?

What JJMack said. An example I pulled in less than 5 minutes:
All I did was inserted a text layer with that same inside color and a stroke layer style with that same outside color (about 3 or 4 pixels; outside position). Font used was Calibri Regular.

Similar Messages

  • Is there any way to get this palette into photoshop CS6?

    I'm curious as to why Photoshop CS6 can't have a simple effective palette choice like this one from Fireworks?
    I'm an artist and this palette makes sense to me.  The standard issue pallette in Photoshop is a mess compared to this.
    Is there any way to get this palette into photoshop CS6?
    Thanks!

    If your talking about the Color Cubes from fireworks as shown in your screenshot, then yes.
    Save the swatches out of fireworks as an Adobe Swatch Exchange File (ASE) and then you can load them into photoshop
    in it's swatches panel like below.

  • I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

    i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

    I assume that you don't have the installation discs, so:
    1. Reboot
    2. Hold command + s key down after you hear the chime.
    3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
    (Type these commands very carefully)
    mount -uw /
    rm /var/db/.AppleSetupDone
    shutdown -h now
    4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

  • What is the best way to create this image?

    Hi, I'm using Illustrator CS5 and I'm sure there is a pretty easy way to create this image with some copy/repeat steps... However I can't seem to figure it out.
    Any suggestions?
    Thanks!

    Ace,
    You may:
    1) Create the circle,
    2) Create  a triangle from a square by deleting the bottom right Anchor Point (Delete Anchor Point Tool),
    3) Place the triangle for the cutout just to the left of the top of the circle (where the angles fit),
    4) Rotate 8 copies round the centre of the circle (you may use the Effect route but you will need the real paths),
    5) Select the trangles and the circle and apply Minus Front (or whatever the Pathfinder command is called in your version.

  • When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

    When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

    Usual cause: printing at the wrong aspect ratio for the image - trying to print 5 x 3 in the shape of a 6 x 4 for instance.
    Regards
    TD

  • Is there any way to create admin role only for one resource.

    Hi all,
    I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
    Is there any way to create admin role only for one resource?
    I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
    It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
    Please suggest,
    thanks

    The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

  • Is there any way to create fields reports users can enter data into?

    I am using Crystal XI to develop reports for my company and have not received any formal training on it.  I'm learning it fairly well through the help files. 
    One of the reports I need to create summarizes our scrap, rework, and additional incurred expenses for our monthly quality reports.  Most of the information is stored in the main program used by all employees, a very small amount of it is not.  I have created sub-reports for each of the different types of costs that are tracked in the system.
    Is there any way to create an area on the report that our QA people can use to enter the items not tracked in the main system?  I am imagining that it would be through another sub-report of some kind, but do not know how to create the fields needed. 
    Thank you very much for any assistance you can provide, even if it is to tell me "You can't do that, ma'am..."  At least then I would know and wouldn't beat my head against the desk trying to figure out how to do it.

    Is defining parameter prompts in the Crystal Report and displaying it in the report a possible workaround? 
    If you define parameter prompts, then Crystal will query the user before running the report - so this would be problematic if the user needs to reference data in the report to enter appropriate values (one possibility then is to use interactive parameters feature available in CR 2008).
    Sincerely,
    Ted Ueda

  • Is there any way, to create with Adobe Muse HTML-Mail Templates?

    Is there any way, to create with Adobe Muse HTML-Mail Templates? or to convert the createt page to only html content? any other tool like an website copyer?
    tanks for help!

    Off the top of my head, you should be able to create mail templates in muse BUT it will require  very basic html/css knowledge on your part. I am assuming you want to do just the signature?
    Create the design you would like on one page, dont do any kind of styling in a master page. Then export the site into a folder. Open the html file with notepad/ textedit and then copy just the code for JUST the template. Throw it in you mail app of choice and it should work.
    This seems like something that would be done alot quicker in dreamweaver in design view.
    PLEASE NOTE: ^i could be completely wrong - but in theory this may work.

  • Is there any way to create a reminder for "today"?

    Is there any way to create a reminder for "today" in the new Reminders app? I used to be able to pull up the "today" list and add things that would go to my default list but automatically show up for today but now it looks as though that option is gone.  Additionally, any way to get dates/times to show up with reminders in the Notification Center?

    Hey chewie314,
    Thanks for the question. From the information you provided, it sounds like you might be looking for the "Scheduled" view. This view will show all of your reminders that are scheduled in a list. To access the schedule view, click the icon:
    Reminders - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph88463e18
    Thanks,
    Matt M.

  • Is there any way to create a file compatible with Premiere Pro

    Is there any way to create a file in Premiere elements that is compatible with Premiere Pro and that can be used in Premiere Pro

    Consternation
    The important information that I do not see mentioned nor offered by you.
    1.What version of Premiere Elements are you using and on what computer operating system it is running? What version of Premiere Pro do you want to use?
    The Premiere Pro Import Supported Formats seem to indicate that it will accept the Premiere Elements project.prel (project file) on Windows Only.
    Adobe Premiere Pro Help | Supported file formats
    This may or may not be possible depending on damaged projects or outdated elements.
    2. If you want to export your Premiere Elements Timeline to a file saved to the computer hard drive and subsequently import that into your Premiere Pro version, that "should" work. You would go to the Premiere Elements Publish+Share/Computer/ and make a selection based on what the Premiere Pro Import Supported file formats are and what you need. I can help you with that. But, details first.
    But, just a "beware"...when you get to Premiere Elements 11 or 12 (if that is the version involved) Publish+Share/Computer/ there are several categories, but all you see is Adobe Flash Video, MPEG, and AVCHD. The rest of the list that includes AVI and QuickTime which both need to be scrolled to all of the time to see them, not just sometimes, with the thin scroll bar to the right of the list of choices. You can export files
    with AVI file extension, under Publish+Share/Computer/AVI
    with MOV file extension, under Publish + Share/Computer/QuickTime
    And, if you do not have QuickTime installed on your computer with Premiere Elements, you are not going to have presets for the QuickTime export.
    Remember, there is more to an export than just its file extension. Know your other export properties as well.
    In many cases, you can customize the export settings to suit your requirements.
    Problems will exist if you are trying to go from Premiere Elements Windows to Premiere Pro Mac or vice versa.
    I would be glad for the opportunity to help you with this issue, but details are needed.
    Looking forward to your follow up.
    Thanks.
    ATR

  • Is there any way to create a HTTP_AAE Receiver without a path in NW PO 7.31

    Hi ,
    Does anyone know how to create a HTTP_AAE Receiver without a path??
    We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
    For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity  :
    TargetHost: IP Address
    Post: value
    Path Prefix: Blank
    During migration  requirment is to keep the Path field BLANK of the Communication Channel,however since  PO has mandatory path field   a "/" is been provided, because of which data post fails.
    PI:  https://IP:9443
    PO:  https://IP:9443/  (Since Path Prefix is mandatory)
    As per my understanding The data is supposted to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available. For Reference attached relevant screenshots.
    Is there any way to  create a HTTP_AAE Receiver without a path. Need ardent support and suggestions
    regarding this.
    Regards
    Riju

    Hi,
    For Service auto- PO from PR, you need to activate Automatic Purchase order creation for Service requisitions in ML91 t.code.
    Note:
    For material :automatic PO creation from PR, follow the steps.
    1) Material Master purchasing view tick automatic PO check box
    2) Vendor Master purchasing view tick automatic PO check box.
    3) Maintain Source list for Vendor & Material.(ME01)
    4) Maintain Purchase Info Record.(ME11)
    5) Create a Purchase Requisition.(ME51)
    6) Use T.Code: ME59 & execute for PR for vendor, you will be able to create automatic PO.
    During creation of PR , select check box of Source Determination in the 1st screen of ME51
    Ensure that Purchase Info Record should be there.
    If you have more than one vendor then fixes only one vendor in source list.
    Regards,
    Biju K

  • Is there any way to create a folder in presentation server - webdynpro abap

    Hello,
    My requirement is to create a folder in presentation server using webdynpro abap..
    I tried on this CL_GUI_FRONTEND_SERVICRES classes ..but its getting an short dump.
    Is there any way to create folder using classes / FM..
    Regards,
    Praveen kumar reddy s.

    Hi PRaveen,
    Check this.. WD_TEST_APPL_ACFEXECUTE
    Check Thamos article..
    http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
    go for help..
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b91539878a2d67e10000000a42189c/content.htm
    Cheers,
    Kris.
    Edited by: kissnas on May 10, 2011 2:24 PM

  • Is there any way to create multiple users in a single shot in oracle db

    Can Any one tell me, is there any way to create multiple users in a single shot in oracle database.

    Hello Nunhum,
    I guess this was not my question.. This is not what I m asking.. I know there is not a single sql statement in oracle ,which could create multiusers alike UNIX/LINUX(OS LEVEL), Whatever you have written..is simple creating them one by one.
    What I am expecting is to have PL/SQL statement which could help us in this regard.

  • Is there any way to create a shadow in both sides of a box?

    Hi,
    is there any way to create a shadow in both sides (opposite) of a box? I just can create the shadow in one side..
    If not, is that possible in CS6?
    CS5.
    Regards

    You can definitely show an inner shadow on just one side of a rectangle.  You just need to turn the blur down to 0 to prevent it from leaking to the nearby sides.  Then set the angle to an exact multiple of 90, like 270 to put the shadow on the top side of the rect.
    This file has some examples: http://johndunning.com/fireworks/scratch/Shadowed%20Elements.png
    If you're trying to simulate a rectangle with different border colors or widths, this auto shape can make that easy: http://johndunning.com/fireworks/about/MultiBorderRect

  • Is there any way to create new decorations in LabVIEW 7.1?

    I've been reading the discussion threads, and now have a pretty good idea about how to programmatically manipulate the color and visibility of LabVIEW decorations.  The available decorations, however, are fairly limited.  Is there any way to create custom decorations?

    You can't create new decorations, but you can import vectoric images (from Office, for example) and use them as decorations (although you can't control their color).
    See here for some examples.
    Try to take over the world!

Maybe you are looking for

  • Calendar app skipping events

    Once I set up an Event in Calendar, the default is that a notification appears on my desktop and on the screens of my iPhone and iPad.  In any event, that's how it works on my devices. Because many of my Events are to remind me of tasks/chores which

  • IdeaPad Z370 and Ubuntu 11.10 64 bit - problem with volume buttons

    I recently bought my new Lenovo IdeaPad Z370 without operating system and installed Ubuntu 11.10 64 bit (the pre-installed system was FreeDOS which I decided to remove). Nearly all is working fine. The only exception are the volume keys: pressing the

  • How do i install lightroom on my mac if already installed on deskto

    how do i get my serial number if i downloaded lightroom on my desktop but want to also have the program on my new mac laptop?

  • PL/SQL Packages that have lots of Remarked code

    Thanks in advance, Does having lots of code that is remarked in PL/SQL packages take up space in the database and impact performance ? I have inherited a system that has lots of remarked code in PL/SQL Packages. And I would like to know if I should r

  • Download as txt

    Hi ,       can any one help me in download as txt file using the function module SO_OBJECT_SEND along with email . a sample code using this function module would be helpfull. Thanks, vinay .