Is there any way to emulate "nounix" option when mounting Samba fileshares?

I need to mount an SMB file share from a Linux server that I do not control. The server was recently upgraded to the new version of samba. With that change, the server now supports samba's new "unix extensions". The problem with this is when the file share is mounted on OS X, symbolic links show up broken because their paths are no longer valid (all details were previously posted in this thread: http://discussions.apple.com/thread.jspa?messageID=8001291). Our environment makes heavy use of symbolic links, so they really need to work transparently.
I know the solution in the previous thread was to disable unix extensions on the server. That is not possible for me in this case. A little googling shows that some linux users (primarily Ubuntu it seems) have gotten around this by adding a "nounix" option to the mount command on the command line. Is there anything comparable in Leopard? Is there a key/value pair that is equivalent to "nounix" that I could use in nsmb.conf? Note that the share shows up just fine in windows because it is not capable of these wonderful new "unix extensions".
Thanks!
-Mike

Is there any way to deauthorize 2 computers when I only have 3 authorized?
No.
I am worried there are other PC's I have used at friends houses which are authorized to play my content, which I dno't want.
Contrary to what it seems, Deauthorize all will not stop their iTunes from playing any of your purchases which may be on their computers.

Similar Messages

  • Is there any way to use -useLegacyAOT option in FlashBuilder 4.6?

    I need to build my ipa with old version of Engine because i have some problems about loading images from outside. Since with Air 15 it is default engine, and i cannot quit Air 15 because of the iTunes specs. I cannot add -useLegacyAOT=yes to compiler options on Adobe Flash Builder 4.6 because it seems that it can be added at FB4.7.
    So is there any way to add this options when i am using FB4.6
    Thanks in advance.

    DeepakJ wrote:
    Hi,
    Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
    Is there any way to modify the SQL query.
    SQL
    select dept, loc, count(*)
    from dept
    group by dept, locOutput-1
    Dept      Loc       Count(*)
    10         AA        1
    10         BB        2
    10         CC        2
    20         AA        2
    20         BB        2Output-2
    Dept      Loc       Count(*)
    10         AA        1
    BB        2
    CC        2
    20         AA        2
    BB        2
    Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
    select
        nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
      , nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
      , e.mgr
      , count(*) n
    from
        dept d
          join emp e
            on d.deptno = e.deptno
    group by
        d.deptno
      , d.loc
      , e.mgr
    order by
        d.deptno
      , d.loc
      , e.mgr nulls first;
    DEPTNO  LOC       MGR   N
        10  NEW YORK         1
                      7782   1
                      7839   1
        20  DALLAS    7566   2
                      7788   1
                      7839   1
        30  CHICAGO   7698   4
                      7839   1
        40  BOSTON    7698   2
                      7902   1

  • HT2486 When I use my iPhone Siri for dialing, it is better to have the names in the address book listed singularly. But when I want to print envelopes from the address book in a formal manner - "Mr. & Mrs. Smith". Is there any way to have both options?

    When I use my iPhone Siri for dialing, it is better to have the names in the address book listed singularly. But when I want to print envelopes from the address book in a formal manner - "Mr. & Mrs. Smith". Is there any way to have both options?

    Only way I can figure is having double entries one with singular + some unique field, (maybe called Siri), then making a Smart group for one or both.

  • Is there any  way to Mask the Name when  a select statement is issued?

    Dear all,
    Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
    e.g if Name: CHIEV SONG MEE
    If user issue a statment select * from customers;
    The Result Should come something Like this:
    Name
    CHXXV SXNG MXX
    Thank You

    user3029023 wrote:
    but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
    For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
    Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
    If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
    No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
    It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

  • Is there any way to block PR changes when PO exists in project builder

    Dear All,
    Could you please advice...is there any way to block PR changes (quantity,price, etc) when PO exists in project builder ?
    Many thanks in advance.
    Nies

    Hi Nies,
    If you are not using the material then you can go for Validation, under Operative Structure> Network> Validation.
    Attach the validation with OPSA click on Automatic.
    In the second scenario if you are using Material Component, as Mr.Muralidharan said OPSG there you can restrict the change by selecting Error Message.
    1. Tcode OPSG in Setting see all the object are selected.
    2. Click on Component tab under change in Purchase Order Exist tab select Error.
    Regards'
    Syed

  • HT204291 Is there any way to use computer speakers when using airplay and apple tv?

    I'm a teacher using an epson hdmi capable projector in my class.  I'd like to play a video (youtube, TED, etc)  to a large class, but as soon as I use airplay, the apple tv mirrors my iPad to the projector, and while the video is fine, the audio is horrible, as it is also mirrored to the epson projector, which has tiny, horrible speakers.  Is there any way to run the audio through the iPad, where I can connect my computer speakers through the headphone jack?  Alternatively, is there an adapter that can connect to the back of the epson projector (see following) that would convert audio in the projector to computer speakers? http://epson.ca/cgi-bin/ceStore/jsp/Product.do?BV_UseBVCookie=yes&sku=V11H428120 -F#2

    I believe if you go to settings> sounds... you can select where you want the sound to come from. So there you can set it to the "internal speakers" and then plug in your computer speakers.

  • Is there any way to retrieve old ringtones when you upgade to a new iphone?

    I just upgraded from iphone 4 to iphone 5. I lost all of my ringtones. Is there any way to retrieve them from itunes? I looked in my purchase history and all I get is music downloades

    If the photos were on the iphone when the last sync was performed, then you should be able to restore from backup.

  • Messages - Is there any way to resend texts automatically when you don't have signal, rather than having to constantly manually 'try again'?

    When i have no signal and send a text, a red circle appears, prompting me to manually resend the text when i find signal. I live in an area with varied signal so this is beginning to get frustrating. Is there any way to set the iphone so it will automatically resend the text when it finds signal again, rather than having to manually resend it everytime? Thanks

    When i have no signal and send a text, a red circle appears, prompting me to manually resend the text when i find signal. I live in an area with varied signal so this is beginning to get frustrating. Is there any way to set the iphone so it will automatically resend the text when it finds signal again, rather than having to manually resend it everytime? Thanks

  • Is there any way to change default layouts when making a book?

    I'd like to move thing around on the page. Is there any way?
    I'd also like to make a whole picture that is in the ratio of 2x3 print that way, but the program crops the ends to fill the space. Is there some way? (If I just add white to the top and bottom of the file will it print some kind of very light white there?
    MacBook pro   Mac OS X (10.4.8)  

    I have noticed this too, i.e. the captured background is BMP, and the capture images are PNG. For example, my command line terminal window backgrounds are 4070.57K versus about 32K to 65K when I convert them to PNG files. Our demonstration files can be enormous because of the BMP backgrounds. It would definitely be advantageous to have a recording setting for PNG versus BMP for the backgrounds in Captivate.

  • Is there any way to find out exactly when I bought my mac

    is there any way to find out exactly how old my mac is. I know I bought it in 2009 but I am trying to find the exact date.

    Enter the serial number here and it will tell you all that and more:
    http://www.appleserialnumberinfo.com/Desktop/index.php

  • Is there any way to get a stacktrace when...

    Hi
    Is there any way to get a stacktrace (both thread dump and monitor dump) when there is nothing wrong with the java application? ..The reason i want this is to see more closer what the application does. I tried the following command: kill -QUIT (PID) ..on a test app. but it didnt show anything, probably because there were not anything wrong, but i still want to see how the application is behaving while its running. I also tried typing <ctrl>\ in the window where the java application runs, but this seems to be the exactly same.
    After typing <ctrl>\ i only get this "Quit" message and no stack trace:
    115845
    115846
    Quit
    So, is it possible to get a stacktrace from the application even if there is nothing wrong with the application just to see how its behaving ?

    Have you tried jstack:
    [http://java.sun.com/javase/6/docs/technotes/tools/share/jstack.html]
    Or JConsole:
    [http://java.sun.com/javase/6/docs/technotes/tools/share/jconsole.html]
    Or the shiny new Visual VM tool:
    [http://forum.java.sun.com/thread.jspa?threadID=5296752]

  • HT4528 Is there any way to track an iPhone when it is off

    I lost my iPhone and it is dead now but i cant track it through find my iPhone is there any other way to track an iPhone 4s? HELP

    No, other than physically looking for it.

  • The other day at school i had lost/stolen ipod touch i had signed up with apple but i havent download the app (find my iphone) is there any way i can find out when my ipod touch gets connected to a wifi and track it

    how do u track an ipod touch when its connected to a wifi and how do u find out when its your stolen ipod touch is connected

    If you set up the Find My iPod service prior to the iPod going missing - the app is for tracking an iOS device from another iOS device - then there is a chance that can be tracked, though it depends on a number of factors (the iPod is turned on, connected to a WiFi network, and has not had the Find My iPod service disabled). Log into icloud.com and go to the Find My iPhone section. Note, though, that you'll only get the location of the WiFi router to which the iPod is connected; there's no way to pinpoint the exact location of the iPod itself.
    If you did not set up Find My iPod, then there is no way to track it. Notify the police and change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance). 
    Regards.

  • Is there any way to minimize/hide games when they're running full screen?

    so i'm a seasoned mac user, but i've always wanted to be able to do this, i've tried virtuedesktops to try and switch screens, but whatever i do, i have to quit the game if i want to change something on my desktop. that, or run it in a window, which kinda s u c k s. i know in windows you can minimize anything by hitting the window key. things like apple-tab don't work either. there must be some way to do this!

    That seems to depend on the game. Certain games seem to disable your ability to switch tasks. But what you could try is to induce the Force Quit (command-option-escape) dialog. If my experience serves correct, this seems to override whatever wants to prevent multi-tasking.

  • Is there any way to restore the 'Open New Tab' option in the tab bar drop-down menu?

    After years of using tabbed browsing in Firefox, I've long-since gotten used to right-clicking the tab bar, and selecting the top menu item 'Open New Tab'. So much so that it has become reflexive. Now with v4, when I perform the same action, it now just reloads the current page. Is there ANY way to restore the option to the pull-down menu? I don't wanna have to move my pointer all the way to the other side of the screen just to open a new tab... (T_T)

    Hello, I suffered from a similar problem with the new search bar type. I've found that you can go into '''about:config''', then search for '''browser.search.showOneOffButtons''' boolean and toggle that. This should restore the old functionality. (You might need to restart your browser)
    Note that, like always, edit your '''about:config''' at your own risk.
    credit: [http://www.askvg.com/how-to-disable-new-one-click-search-bar-interface-in-mozilla-firefox/ askvg.com]

Maybe you are looking for