Is there any way to export complete PR as an XML?

hI,
Please help me to know if there is any way to export Complete PR as an XML...if its der,then how we can do it?
Also, if data is already der in database table then is it feasible to create a PR(reverse case)?
Kindly Help.
Thanks,
Lina

Hi
You have the opton in PR to export to XML. But I am not sure whether it suits your requirment.
Go to ME53N>Click on Export Button>Spread Sheet>Click the radion Button All Available formats>Select from Drop down SAP XML format
Hope it helps
Karthik

Similar Messages

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list. It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
Let's see what we can find. I may just take it back to the Apple Store.

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyone

BaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect.

Is there any way to export all of my parameters to a text file at once?

I need my parameter for another report and i don't wan tot create same parameter again, i can export and import the parameters one by one but there are many parameter and i don't want to do this procedure for each of my parameter separately!
My question is, is there any way to export all of my parameters to a text file at once?
Thank you

hi, Jamie Wiseman
I think my question wasn't clear.
what i am asking for i want to copy parameters itself as parameter to another report , not just parameter field name.
I put some picture about where i want please check attached.
As you see there is export function inside of export but i dont want to do this procedure of each of my parameters , i want to export them at once.
SO do you have any idea for this

Project Server 2010: Is there any way to export to excel the Graph part of a view?

We need the graphical part of a project center view in a file, is there any way to export this to excel?
Thanks in advance.

Hi EPM Quest,
Unfortunately the Gantt chart of the project center views cannot be exported as is in Excel.
But based on projects data, you can build a Gantt chart in Excel. See Office article below:
http://office.microsoft.com/en-us/excel-help/create-a-gantt-chart-in-excel-HA001034605.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

HT201210 My itouch screen froze showing "plug to itunes" after trying to update to iOS6. Is there any ways to export all the pictures from it before restoring?

My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?

Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
RecBoot: Easy Way to Put iPhone into Recovery Mode

Is there any way to export or save my Lightroom 5 presets and keywords/tags to an external storage drive prior to a program and data wipe due to a corrupt registry? Thanks.

Is there any way to export or save my Lightroom 5 presets and keywords/tags to an external storage drive prior to a program and data wipe due to a corrupt registry? Thanks.

Look at these instructions for how to move your LR to a new computer and copy things to a backup device until your computer is reformatted and you reinstall LR:
http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/

Is there any way to upload Tariff Code (with multiple XML files) from application server?

Hi All,
Is there any way to upload Tariff Code (with multiple XML files) from application server?. Its urgent.
Regards,
Jatin

Hi Jatin,
Yes, of course you can upload multiple files for tariff codes.
This can be done by the below path:-
SAP GTS Cockpit(tcode-/sapsll/menu_legal)-->Customs Management-->Classification-->Classification Master Data-->Upload Tariff Code Numbers from XML file(tocde- /SAPSLL/LLNS_UPL101).
In the above area after browsing and choosing the first file, please select multiple check box to choose more files as well. Then you can further select your application server and upload all those files in one go.
PS:- Although, we have an option to upload multiple such files but actually we should avoid multiple file uploads due to various reasons. Hence, please take utmost care during such procedure.
Regards,
Aman

Is there any way to export 2.35 Anamorphic source to a 16x9 letterboxed frame WITH timecode or text overlays?

I have been trying to export temp cuts of an anamorphic project (2.35:1) in a letterboxed 16:9 frame with timecode and text overlays and other Additional Video Effects. Converting the 2.35 to 16x9 has been a breeze with the Preserve Aspect Ratio option in Cropping & Padding . The problem is that the black bars that that puts in the 16:9 frame appear OVER any of the Additional Video Effects, thus covering them up.
E.g. if I select a Text Overlay and place it in the Center, I can see it just fine. But if I want it Upper Left, Title Safe, it is covered by the black space of the Letterboxing. So the Additional Video Effects are getting added, they are just getting covered by the letterboxing. You can even see the very edge of the text in the Title Safe position, peeking out from behind the letterboxing, which is, of course, frustrating .
Thus far it's been a two-step process: letterbox the anamorphic source, then add TC and other video effects in a second job.
So - is there any way to do this in ONE step? It would really help my anamorphic workflow.
(apologies for the lengthy question.)
[I'm using FCPX 10.1.3 & Compressor 4.1.3, in OSX 10.9.5 on Retina MBP, Late 2013, w/ NVIDIA GeForce GT 750M 2048 MB]

Thanks for the reply Russ.
Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export.

Is there any way to export data from a calendar 5 instance to 6.3?

I've run into yet another issue with my migration from calendar 5 to 6.3.
It turns out that one of our satellite clinics has a very large amount of data stored on our older server. Right now we're having to put the migration on hold because there are several hundred events on the old server that are repeat events and/or events scheduled relatively far in the future. This issue, along with the possibility of double booking events/appointments while both servers are active, is a serious risk that could have detrimental effects on this site.
There are a few issues that I'm not certain how to handle in this case. First of all, the old server's database is stored in schema 1, and changes in the LDAP directory structure from cal 5 vs. 6.3 made it impossible to migrate the old database and accounts. The new server is schema 2. So migrating the whole directory, especially at this point, seems rather unlikely.
Is there any way that I can export data for specific accounts and calendars for the people at this site in a version-independent format and import it to the new server? If nothing else we can schedule somebody to come in on one of the weekends and manually copy the data, but if possible I'd like to avoid devoting somebody to that for the several hours that it would take to copy that by hand. Also, this would not be the preferred method due to the fact that human error could result in our clients being misscheduled, which would obviously be bad for business.
I'd appreciate any ideas anybody may have on this matter.
Thanks in advance.
-Damon

damo.gets wrote:
Actually I guess I was missing the obvious method of simply exporting to xml and importing on the new calendar. For some reason I thought that the exports were incompatible between versions as well.Hmm... whilst this may have worked on the face-of-it I do wonder whether everything has indeed been moved across and more importantly translated into the correct form e.g. access controls, uids => uids@domain format.
Is there anybody that can answer definitively whether or not any data will be lost by this procedure?There are simply too many variables involved in your proposed migration to provide any kind of 100% iron-clad guarantees. I would suggest you perform a thorough test migration of the data and then compare the ics/xml export from the ics5/6 systems to see if any of the data has changed. Also test to see whether access controls are still working (can a user who could previously edit another persons calendar on ics5 now do so with ics6).
Things to look out for are that meeting attendee information is kept, any 'fancy' characters (i.e. 8-bit characters) and formatting information is kept, the number of tasks/meetings is consistent between the two versions and so forth.
Regards,
Shane.

Is there any way to export to multiple DVDs?

I have a short digital video that I want to export as an Image Sequence in TGA format (for transfer to film). Because the size of each image file is quite large (16MB or so), I want to export them directly to a DVD, rather than use up all my hard disk space.
When I tried this, FCP keeps adding files to the DVD, even when the available disk space on the DVD (4.7 gigs) is exceeded. When I click the Burn icon on the DVD, I get the "remove some files" message.
Is there any way I can have FCP prompt me when the DVD reaches its limit, so I can insert another DVD?
Perhaps this is more of a Mac question than a FCP question.
thanks,
Scott

If you're spending all that money to transfer to film (I hope you have a good reason) you should spend another $100 to buy an external hard drive. You'll be much better off with that. The post house doing the film transfer will thank you too.

Is there any way to export or extract my glossary?

I have published several books with sizable glossaries now and would like to combine them. Is there a way to gather this information as an export or am I doomed to cut and paste?
Thanks

Mario, I don't think this link didn't answer the question. It explains only how create and manage glossary terms but not how to import/export.
GLossary is an amazing feature but still 1.0 material. I have the same issue as other users where I have 150+ entries that I want to import/export (carry over) to other related books. THis is a feature that definitely needs to be in the next iBA update.
Also, I ullustrate most of my Glossary entries, which is great that you can do it, however, there is a bug.
The images in the Glossary page have to be flat. If you copy paste an image that is a grouped object then, no problem it will work, like in the main pages. WHen you deliver your content, then you get an error message and you have to find the image(s) that are grouped. THe only way is to take a screenshot of images which has two side effects: It increases the file size of you book and the fixed resolution of the screenshots
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Is there any way to export iTunes U course notes?

For example, collect all notes of a course and convert them into text files. Many thanks

I was unable to find a way to export all notes at once; I had to select each one to copy and paste.
Sounds like a great suggestion to make at bugreport.apple.com!

Is there any way to export a desktop AIR package when desktop is not supported by an ANE?

I have a third party ANE that I need to use. The ANE has a target for Android, but when I add it in Build Path->Native Extensions an error shows up "This ANE does not support Desktop(Mac) platform". Now, my app is targeting android, but to make it easy for others in my company to play builds without having a device, I've been using the "Export Release Build->Signed AIR package for installation on desktop" option. The problem is, since I've added the ANE, I'm no longer able to hit the "finish" button because it's greyed out due to the error (even though the checkbox to include the ANE is unchecked in the export settings. The only way I've found to work around this is to remove the ANE temporarily and comment out references to it to build the desktop package, which is not optimal. Any other suggestions?
Thanks!

Rather than commenting it out, you could define a compiler parmeter:
[code]
-define=CONFIG::includeAndroidANE,true
[/code]
Then, in your code, wrap any references to the problem code in the config statement
[code]
CONFIG::includeAndroidANE
import the.problem.package.ProblemExtensionClass;
[/code]
And:
[code]
CONFIG::includeAndroidANE
   if(ProblemExtensionClass.isSupported()) {
        var v:ProblemExtensionClass = new ProblemExtensionClass();
         v.init();
         v.doSomethingThatIsntSupportedOnAMac();
[/code]
Then, when you compile for Mac, you just need to set CONFIG::includeAndroidANE,false;
This is what OSMF does to support different versions of the player, and also what SWIZ do to support different versions of Flex.
All good.
G

Is there any way to export complete PR as an XML?

Similar Messages

Maybe you are looking for