Is there any way to filter an AD group for Synchronization?

Project Server 2010 , the AD synchronization fails every week because of users who have left the organization.
Is there any way to filter the AD group so that only active users are picked up into the application?
Thanks in advance.

Thanks Ricardo.
The problem is that if a user leaves, his id is usually reused.
Eg. John Smith leaves the organization, his ID JSmith is reused.
But the original record is in the AD group, so it fails to recognize the new user say Jack Smith.
The error seen in the logs is typically:
" A resource could not be updated during Project Server Active Directory Synchronization because a duplicate windows account name conflict occured that could not be resolved. Resource GUID: d2077b6c97992-57d5-4d87-9ba9-c6ae273. Resource Name XYZ"
and
"the supplied windows account name is invalid."

Similar Messages

  • My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

    Hi cindy,
    If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
    Here's what I mean:
    If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
    However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
    You would need to authorize the computer for each of the new Apple IDs.
    Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
    So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
    The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
    Hope that helps,
    GB

  • Is there any way to create admin role only for one resource.

    Hi all,
    I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
    Is there any way to create admin role only for one resource?
    I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
    It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
    Please suggest,
    thanks

    The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

  • Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

    Is there any way to change the default font for outgoing text-messages, in "Messages"?
    I can change it for one conversation, but then it resets to the default, tiny font.
    The preferences menu only lets me change the conversation font.
    (OSX 10.10)

    Hi,
    As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
    And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
    Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
    All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
    The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
    Changing the Font would involved editing the Balloon.transcript file.
    10:34 pm      Saturday; December 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    Welcome to the Apple Community.
    Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
    Any responses you may receive may well be removed and would be wholly unreliable in any case.
    If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

  • Is there any way to display filenames or captions for photos?

    is there any way to display filenames or captions for photos?

    Thanks. There are so many it's very hard to see which one does what. Since I edit  on the MacBook Pro using Photoshop Elements, all I really need is a way of seeing the filenames, and secondarily re-arranging thumbnails on the iPad screen manually.

  • Is there any way we can set default value for a Date Attribute to current date in Master Data Services

    Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
    I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
    Thanks.

    Hi Anagha,
    So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
    1. Add buisness rule which can set a default value when Date = NULL/Blank
    2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
    3.Go to that table and add a after update trigger like
    if uda_<entityid>_<attributeid(Date attribute)> = default value
    update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
    I will check on this too from my side.
    By the way AFAIK i dont think so calendar control integration is possible .

  • Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?

    Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?

    Once the Lion download is complete quit the installer and follow these directions. The file you need to make a boot disk disappears after you install Lion.
    Egg Freckles | Burning A Lion Boot Disc
    However, the Lion installation includes a recovery partition. It won't be of help if your entire HD dies but is very handy otherwise. This Knowledge Base article has a lot of good information about Lion's recovery partition.
    OS X Lion: About Lion Recovery

  • Is there any way I can create a form for Muse that will integrate with their Python backend system?

    Attention Anyone that my be able to help PLEASE
    I have a client that I am building a website for in Muse and they have a backend system thru "Python" that I am guessing runs their information. So basically im asking is there any way I can create a form for Muse that will integrate with their Python backend system? Have any ideas? I really need a large form that will work with "Python"
    Thanks A Bunch!!! Dan

    ITBobbyP hi again,
    Excel formats are not backward compatible, you need to use the proper driver.
    Arthur
    MyBlog
    Twitter

  • My computer broke and I got it fixed. It doesn't say that the hard-drive was replaced, but I can tell my data is gone, including Pages that I bought. Is there any way of getting that without paying for it again?

    My computer broke and I got it fixed. It doesn't say that the hard-drive was replaced, but I can tell my data is gone, including Pages that I bought. Is there any way of getting that without paying for it again?

    Or if you purchased Pages as part of iWork on a disk, reinstall from the same disk.
    Best of luck.

  • Is there any way to check an iPhone 5 for a virus?

    Is there any way to check an iPhone 5 for a virus?

    oxdog007 wrote:
    What causes the screen to enlarge to the point you can't navigate the phone?
    Double tapping the screen will cause it to zoom. Go to Settings - General - Accessibility - Zoom = Off??.

  • Is there any way to disable preview-icons & fileinfo for connected drives?

    Is there any way to disable preview-icons & fileinfo for connected drives?
    i.e. when i'm connecting to SMB share, and i see .mp4 file, i see icon change to video-frame.
    and when i see folder, i see "5 items"
    and i wanna disable it per-dir or per-connect.

    Praveen-
    The dispatcher caches the entire HTTP response body, so doing what you are describing actually requires two steps:
    1) Loading the non-cacheable component through Ajax (or some other edge side assembly technology like ESI)
    2) Including the Dispatcher: no-cache header in the response when that component is requested.
    #1 is pretty easy to do with jQuery
    #2 is covered here: http://dev.day.com/content/kb/home/Dispatcher/faq-s/DispatcherNoCache.html
    You will probably want to use the WCMMode to only do the dynamic loading on the publish server.
    HTH,
    Justin

  • Is there any way to setup a email account for sending only

    is there any way to setup a email account for sending only?  i have a pop account that i fwd to my google acct, so all my mail is mapi thru google/exchange. i do need this account as a send email address so currently i have entered a wrong password so i do not duplicate my inbox.  its annoying as i get the bad reteival popup continuessly.  Many email products, like outlook allow you to decide which accounts to download.  it should be a simple fix from Apple, but dont think there is any one to talk too about this.  other option is to use the gmail app or chrome, but like apple's email better for iphone  Any ideas??

    Read here:
    http://apple.stackexchange.com/questions/26105/iphone-mail-send-only-account

  • Is there any way to stop certain 'contact groups' syncing on to my iPhone from Mac?

    Hi All,
    I use my Mac for business purposes and on it I want to use the conact groups feature to create a load of contacts, with email addresses, which i will regularly send emails to. However, i noticed whenever i add or change any contacts on my mac, it updates them wirelessly on my iPhone..
    Is there any way I can stop certain groups from syncing on to my iPhone??
    Hope ive explained myself properly.
    Thanks in advance.

    never mind worked it out

  • Is there any way to filter the LCCS room console from the list of users?

    I want to be able to hide the user that's logged into the room console from the list of users. Is there any way to identify that user?

    Hi,
    There is no standard way to hide users as such other than using anonymous presence. But the catch is, if you would set any property of change anything from dev console that publishes a message, then you will be noticed.
    The user that logs into the room console is always the owner, may be your client app, you can hide based on your both permission level and name/userID by subclassing Roster. I am just throwing up ideas, but as such there is no standard method for this.
    Whats your use case ? It's an interesting thought though and something we would think about on our side.
    Hope this helps
    Thanks
    Hironmay Basu

Maybe you are looking for

  • ACS 4.1 Upgrade

    i want to upgrade my acs server version from 4.1 to latestonline, how can i do that(steps) i also tried the patch but couldnt as my user account dont have service level aggreement

  • Accessing database in a different os

    My java application runs in a unix machine. the database (sql) is in a windows nt machine. Can i access the database. If so what modification should i do?

  • WARNING:Could not set the asynch I/O limit

    Every night database generate trace files with WARNING below Does anybody knows what this mean? WARNING:Could not set the asynch I/O limit to 252 for SQL direct I/O. It is set to 200 Oracle Version: 11.1.0.7 AIX 5.3

  • A question about constructor

    I got this piece of code from a book: public class Bala{ int x, y; Bala(int x1, int y1){ x=x1; y=y1; Bala(final Bala bala){  //here x=bala.x; y=bala.y; What is the purpose of "final" here. I wrote a simple test programm to do the constructor with and

  • HT3576 I can't tweet from the notification center, even if I don't use an emoji!

    I just got the iphone 5 last week and not once have I been able to tweet using the notification center. I upgraded from the 4s so I know how to use it, and I've gotten really used to using it rather than having to open the app and go in and wait for