Is there any way to filter the LCCS room console from the list of users?

I want to be able to hide the user that's logged into the room console from the list of users. Is there any way to identify that user?

Hi,
There is no standard way to hide users as such other than using anonymous presence. But the catch is, if you would set any property of change anything from dev console that publishes a message, then you will be noticed.
The user that logs into the room console is always the owner, may be your client app, you can hide based on your both permission level and name/userID by subclassing Roster. I am just throwing up ideas, but as such there is no standard method for this.
Whats your use case ? It's an interesting thought though and something we would think about on our side.
Hope this helps
Thanks
Hironmay Basu

Similar Messages

Is there any way for a basemap to be manipulated from the client side?

Hello,
Essentially, we have a basemap (+basemap A+) that contains boundary geography (i.e., county, tract, block boundaries) and we have a theme (+theme A+) that contains housing unit points.
The idea is that theme A will be a layer that the user will be able to switch on/off. We know how to do this, but the problem comes in where performance is concerned.
Previously, theme A was actually included in basemap A, and performance was not an issue, but the problem then was that the user was not able to turn that layer on/off.
Also I have done everything I know in terms of caching as well as using the mapviewer API
(e.g.,
test_theme.setClickable(false);
test_theme.enableInfoWindow(false);
test_theme.enableInfoTip(false);
test_theme.enableLabels(false);
test_theme.enableAutoWholeImage(true);
test_theme.setMinVisibleZoomLevel(5);),
but rendering the theme on the client side is still way too slow (even at zoom level 5).
So, my question boils down to this. Is there any way for a basemap to be manipulated by a user? I.e., Is there a way for a user to pass parameters to a basemap, essentially telling it which themes to turn on/off?
I know you can specify which zoom level the basemap's themes are visible, but again, we want the user to be able to have control of when a certain theme is shown or not.
Thank you for any help you can provide,
John
Edited by: user641525 on Mar 18, 2009 10:29 AM
Edited by: user641525 on Mar 18, 2009 10:30 AM

What you may try is to replicate your base map but take the point theme out of its definition. Then create a second tile layer for the new base map. You can add both tile layers to the client (but set only one of them to be visible). Then simply switch the tile layers' visibility on/off based on user turning on/off the point theme. The built-in Oracle Maps tutorial #22 (Multiple Base maps) has some sample code you might be able to re-use.
thanks
LJ

Is there any way to recover lost iTune I purchased from the itunes store?

Is there any way to recover my iTunes Library without re-purchasing all the songs-library was lost in PC problems.

Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time; you can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Is there any way to add a credit card number from the iPhone for the app store

Is there any way to add a credit card to my account from my phone my computer has crashed and I can't update any of my apps

I don't believe so. I will have a closer look though and report back

I have had my iphone 5 stolen and last backed up approx. 2 months ago. I don't think I've ever gone through and set up PhotoStream however it has always appeared on my phone. Is there any way of getting back messages/photos/etc from the past 2 months?

I have had my iphone 5 stolen/have lost my iphone 5. I haven't backed it up for a while (2 months?!) and I am not sure that I actually set up Photostream however it's always been on there from what I can tell (icon is there). Is there anyway of getting back contacts/messages/photos/anything from the phone onto my new replacement phone if it hadn't been backed up recently? I've got everything up until the last backup - contacts and messages aren't such an issue for me but the photos mean a lot!!!

If you are logged in to icloud with your same Apple ID. Go to setting on your phone>Photos & Camera and turn ON my Photo Stream.

Is there any way to delete more than one email from the iPhone at a time?

What if I know I've read everything already online - can I press my Mail icon and instead of opening & deleting one by one, can't I delete everything in my Mail that's there? THANKS!

Use the edit button, then select all messages you want to delete, and press "Delete" button. You still have to select one by one, but you'd have to do it anyway.

*** Is There Any Way To Hide RAID "Boot OSX" Volumnes from the Finder? ***

I have several RAID volumes, and these darn "Boot OSX" guys take up space and distract.
Couldn't find a utility that will hide them.
- Ted.

Hi Nasa,
Please try the authorization object S_RS_ICUBE. One of the fields is "SubObject". One of the choices for this field is "Data".
Be sure that your developers do not have this field for the InfoCube/InfoArea in question.
That might work.
Another option (if you are on BI 7.0) is turn on authorization relevance for one of the InfoObjects in the Cube.
Then, be sure that the developers do not have an analysis authorization with this characteristic (or that they don't have 0BI_ALL). This is another layer, and might not stop access in all situations, for example transaction listcube.
Good Luck
Rob

I updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down. Is there any way to fix this without bringing it into the Genius Bar?

i updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down. Is there any way to fix this without bringing it into the Genius Bar?

Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

Is there any way to filter an AD group for Synchronization?

Project Server 2010 , the AD synchronization fails every week because of users who have left the organization.
Is there any way to filter the AD group so that only active users are picked up into the application?
Thanks in advance.

Thanks Ricardo.
The problem is that if a user leaves, his id is usually reused.
Eg. John Smith leaves the organization, his ID JSmith is reused.
But the original record is in the AD group, so it fails to recognize the new user say Jack Smith.
The error seen in the logs is typically:
" A resource could not be updated during Project Server Active Directory Synchronization because a duplicate windows account name conflict occured that could not be resolved. Resource GUID: d2077b6c97992-57d5-4d87-9ba9-c6ae273. Resource Name XYZ"
and
"the supplied windows account name is invalid."

I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

Is there any way to download a backup to icloud over the internet

is there any way to download a backup to icloud over the internet

Welcome to the Apple Community.
A back to iCloud of what. Your mobile devices can be backed up to iCloud using the iCloud settings.

Is there any way to create 3D PDF file without having the model tree ?

Is there any way to create 3D PDF file without having the model tree ?
3D communication is good but sometime we don't want the receiver to be able to study every components in model.
or any way to make the receiver cannot use model tree and measurement tool ????
Thank you very much

You can remove the assembly tree by doing a roundtrip in 3D Toolkit, here's how:
- start Acrobat 3D
- drag & drop a CAD file
- click on 3D Annot to activate
- right-click on 3D
- select 'Edit in 3D Toolkit'
- 3D Toolkit launches
- click in 'Scene Tree' panel
- right-click on top assembly name
- select 'Tools->Collapse Hierarchy'
- select 'File->Save'
- select 'File->Exit'

TS2529 I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook

I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook

If the backup is corrupt, there is nothing that can be done.
For what reason did you choose to not copy the pictures off the device to a computer prior to attemping an update or whatever caused the need to restore? iPhones are not intended as sole storage of any media.

Is there any way to retrieve photos that were put in the trash can and then it was emptied? Or is there a way to move photos from an imovie to iphoto?

Is there any way to retrieve photos that were put in the trash can and then it was emptied? Or is there a way to move photos from an imovie to iphoto?

If you've emptied the trash, ehtn no. However if you have a backup, like Time Machine, or a recent backup copy of your photo library you could recover the photos from the trash.
The answer to getting a snapshot form iMovie depends on what version you have.
I should add it technically may be possible to recover the emptied trash, but if you really want to do that you would need to download a utility software that can attempt to recover deleted files. Do it soon before you start writing more data to that disk. At the moment I don't have a recommendation for such a program. Maybe someone else out there will offer suggestion.

Is there any way to delete duplicate files en mas within the new itunes program?

I've just installed the new itunes program on my laptop. I used the scan for media option to find music. Problem is almost every entry and there's several hundred of them is duplicated and in some cases triplicated within the itunes media library.
Question ... Is there any way to delete duplicated files en mas withing the itunes library folder?
Please don't tell me that I'm going to have to do it individually as that may take days.
Thanks

Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning
to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2

Is there any way to filter the LCCS room console from the list of users?

Similar Messages

Maybe you are looking for