Is there any way to force time machine to keep retrying after disk i/o error?

a little background to my problem:
i've had a hard drive problem previously, and i managed get all the data off of my mac by trying and retrying to access the same files and also from my working time machine backup. after zeroing out and reformatting my drive and doing a clean install of Mavericks i had everything back up running no problems.
recently, my macbook pro would be stuck and slow in recently imported iphoto pics so i figured my hard drive is really failing this time around
i try to get a time machine backup to save what i can, but after a couple of tries time machine would just stop backing up and in console i would see a disk i/o error.
is there any way to force time machine to keep trying to backup through the disk i/o error so i can save what i can before getting a new drive?
edit: a little more info, i know i have a harddrive error from looking at the console, but when i do a verify disk in disk utility it comes up clean and even after doing a disk repair it comes up clean i still see disk i/o errors in the console.

See:
*http://kb.mozillazine.org/Preferences_not_saved
Thee can also be a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.<br />
New files will be created when required.
See "Corrupt extension files":
* http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

Similar Messages

Any way to force Time Machine to use existing backup after inheriting?

Hi,
The hard drive in my iMac failed last week, and a replacement drive as well as a new logic board were installed. I installed OS X onto the new drive and then used Setup Assistant to recover all data from my Time Machine backup. Of course, once everything was back in place, Time Machine wouldn't recognize the backup as its own (per Pondini's site, this is because the logic board replacement makes Time Machine think it's a whole new computer).
To resolve this, I issued the Terminal command to inherit a backup, but this wasn't enough so I also issued the command to associate a backup with the computer. This seemed to work, and I was able to kick off a new backup. Time Machine did a complete scan and determined that it needed to back up everything on the computer as new. Because there's not enough space on the Time Capsule, it then started deleting old backups, one after another, until I noticed what was going on and stopped it after a couple hours.
So my question is this: is there a way to get Time Machine to use the old backup data to do an incremental backup? I'm not sure why it thinks it has to save everything; I could see it saving a copy of the OS, since that was installed from scratch, but all the user account data has been restored from backup so it should match what's in Time Machine. If there's no way to do this then I guess I'll just delete the Time Machine archive and start over, but for versioning purposes it would be nice to have the old Time Machine archive data.
Thanks!
Here's some log data:
10/12/13 8:25:12.755 PM com.apple.backupd[19003]: Starting manual backup
10/12/13 8:25:12.841 PM com.apple.backupd[19003]: Attempting to mount network destination URL: afp://[email protected]/TimeMachine
10/12/13 8:25:14.645 PM com.apple.backupd[19003]: Mounted network destination at mount point: /Volumes/TimeMachine using URL: afp://[email protected]/TimeMachine
10/12/13 8:25:14.687 PM fseventsd[48]: disk logger: failed to open output file /Volumes/Time Machine Backups/.fseventsd/fc007524359f8bb3 (No such file or directory). mount point /Volumes/Time Machine Backups/.fseventsd
10/12/13 8:25:14.687 PM fseventsd[48]: disk logger: failed to open output file /Volumes/Time Machine Backups/.fseventsd/fc007524359f8bb3 (No such file or directory). mount point /Volumes/Time Machine Backups/.fseventsd
10/12/13 8:25:40.251 PM com.apple.backupd[19003]: Disk image /Volumes/TimeMachine/iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
10/12/13 8:25:40.253 PM com.apple.backupd[19003]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
10/12/13 8:25:41.831 PM com.apple.backupd[19003]: Inheritance scan required for /, associated with previous UUID: 30DCBA86-7702-31FD-B8A5-0CFBCE325E36
10/12/13 8:25:41.923 PM com.apple.backupd[19003]: Event store UUIDs don't match for volume: Macintosh HD
10/12/13 8:25:41.966 PM com.apple.backupd[19003]: Deep event scan at path:/ reason:must scan subdirs|new event db|
10/12/13 8:25:41.966 PM com.apple.backupd[19003]: First backup after disk inheritance for / - complete scan required
10/12/13 8:41:23.297 PM com.apple.backupd[19003]: Finished scan
10/12/13 8:49:06.137 PM com.apple.backupd[19003]: Found 1059692 files (565.28 GB) needing backup
10/12/13 8:49:07.658 PM com.apple.backupd[19003]: 679.85 GB required (including padding), 143.39 GB available
10/12/13 8:49:15.324 PM com.apple.backupd[19003]: Ejected Time Machine disk image: /Volumes/TimeMachine/iMac.sparsebundle
10/12/13 8:49:15.324 PM com.apple.backupd[19003]: Compacting backup disk image to recover free space
10/12/13 8:49:57.436 PM com.apple.backupd[19003]: Completed backup disk image compaction
10/12/13 8:49:57.437 PM com.apple.backupd[19003]: Starting manual backup
10/12/13 8:49:57.888 PM com.apple.backupd[19003]: Network destination already mounted at: /Volumes/TimeMachine
10/12/13 8:50:23.419 PM com.apple.backupd[19003]: Disk image /Volumes/TimeMachine/iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
10/12/13 8:50:23.421 PM com.apple.backupd[19003]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
10/12/13 8:50:24.966 PM com.apple.backupd[19003]: Inheritance scan required for /, associated with previous UUID: 30DCBA86-7702-31FD-B8A5-0CFBCE325E36
10/12/13 8:50:25.022 PM com.apple.backupd[19003]: Event store UUIDs don't match for volume: Macintosh HD
10/12/13 8:50:25.069 PM com.apple.backupd[19003]: Deep event scan at path:/ reason:must scan subdirs|new event db|
10/12/13 8:50:25.070 PM com.apple.backupd[19003]: First backup after disk inheritance for / - complete scan required
10/12/13 9:06:03.024 PM com.apple.backupd[19003]: Finished scan
10/12/13 9:14:04.765 PM com.apple.backupd[19003]: Found 1059692 files (565.28 GB) needing backup
10/12/13 9:14:06.234 PM com.apple.backupd[19003]: 679.85 GB required (including padding), 143.39 GB available
10/12/13 9:14:06.318 PM com.apple.backupd[19003]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/iMac/2013-10-12-202541.inProgress/DB2AD703-283F-42A2-8 97D-194AE5F2F23B containing 4 KB; 143.39 GB now available, 679.85 GB required
10/12/13 9:16:59.047 PM com.apple.backupd[19003]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/iMac/2013-09-05-000218 containing 877 MB; 144.26 GB now available, 679.85 GB required
10/12/13 9:24:37.780 PM com.apple.backupd[19003]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/iMac/2013-09-04-002732 containing 1.33 GB; 145.6 GB now available, 679.85 GB required

Thanks Linc.
What happened is I needed to retrieve something from Time Machine prior to starting a backup (the first backup after restoring everything). However, Time Machine wouldn't connect to the Time Capsule, so that is why I used the tmutil commands. Probably if I had instead started a backup then it would have asked me if I wanted to inherit.
Well, if there's no way to avoid a full copy then I guess I'll delete the archive and start over.
Thanks again for your help.

Is there any way to disable time machine based on network connection?

I would like to have time machine not run when I am on my wireless connection, but be enabled when connected via ethernet.
Is there any way to do this automatically?
Thanks!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.

Is there any way to undo Time Machine formatting?

Within 20 minutes of becoming a proud iMac owner for the first time I think I have made a serious mistake
I have two external hard drives, a 1TB Seagate that I wanted to use as my Time Machine back-up drive, and a 500MB WD drive that I had various files on that i wanted to copy to my iMac.
I had both drives connected through USB and when I went through set-up I selected the Time Machine option for the Seagate drive. I certainly don't recall my WD drive being mentioned at any point in the process, however when I look at the WD drive it now shows as 'Time Machine Backups', as does my Seagate drive, so it appears both drives were re-formatted.
Is there any way to undo this or will I need to look at data recovery software?

It sounds like you got this prompt:
And clicked Use as Backup Disk. Then got this:

Is there any way to force iPhoto to present faces by folder for identification rather than randomly? Would provide better context for identification especially if a huge number of images is involved.

Before I commit the time and energy required to load and tag faces in 25,000 images within iPhoto, I need some questions answered;
Is there any way to force iPhoto to present faces by folder for tagging rather than randomly? When so many images need tagging, over many years, the context of a folder helps with the identification. The work around is to load the images into iPhoto one folder at a time and do the tagging then.
How do I get iPhoto to present the tagged faces by last name rather than first name? When so many faces will be identified, it is much easier to find people by surname, particularly when I share the library within the family. The work around is to enter names as last name and first name. Being able to toggle the sort is much more desireable.
Is there a way to export a portion of the library including faces? I want to pass on portions of this huge 125 GB library to my family members.
Since my family members will need an Apple computer to view the images and faces, they will likely have their own photo library. So is there any way to combine two libraries and merge the faces?
About 2/3 of my images have been scanned, so the date of creation is the scanned date rather than the date the photo was taken. Will this mess up any sequencing or the retrieval of faces?

If I want to carve off part of a library, I presume the way to do this is to make a copy of the library using PLM then go into iPhoto and delete what I don't want. The result is the carved off portion.
You don't need Library Manager to delete the portion you don't want.
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
If I want to merge two libraries, PLM implies that it will do this but will the Faces be merged too?
I believe so.

Is there any way to force the applet to load the file without using cache?

Hi,
I have the applet that renders some data from a file specified as the parameter. The problem is that the user can do something, that changes the input file and reloads the page, but the applet renders old data (from browser cache most probably)
Is there any way to force the applet to load the file without using cache?
Regards,
Zdenek

The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

Disc in drive that Mini will not recognize, will not eject. Is there any way to force eject? The computer says it's empty, but it's not.

I have a disc in the super drive but cannot eject it because the Mini does not recognize that it's there. I've tried the eject button on top of the screen and in the dvd player controls. I wish there was an eject button on the machine. Is there any way to force eject?
Thanks.

RGA,
Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
Spencer S.

Is there any way to force Firefox to remember passwords?

As many have complained about, there is a growing trend for websites to prevent browsers, including Firefox, from remembering passwords. This is absolutely infuriating. Like most people, I have on the order of 100 passwords, and thanks to idiotic, overzealous IT guys who need to justify their own jobs, we are forced to constantly change them to ludicrous, impossible-to-remember combinations of symbols and numbers. (Does anybody really get their accounts stolen because some hacker sits down and tries to guess their password? Somehow I find that very, very hard to believe.)
First world problems, I know. My question though is simple: is there any way to force Firefox to remember passwords? Perhaps an add-on or external program of some kind? I know there are password manager programs, but the last time I checked, those were all but worthless and didn't work as well as the built-in Firefox support for remembering passwords. Thanks for any help.

hello andrew, yes you can either [https://addons.mozilla.org/firefox/addon/remember-passwords/ install an addon] or [https://www.squarefree.com/bookmarklets/forms.html#remember_password use a bookmarklet] to circumvent this restriction.
in an upcoming version of firefox, this functionality will also be built-in directly into the browser: http://www.ghacks.net/2013/12/24/firefox-29-save-fill-autocompleteoff-passwords/

Is there any way to force purchase an unsupported app?

I'm currently stuck on OS X 1.7.5 since my MacBook Pro isn't compatible with anything more recent than that.
However, I'll be upgrading to a new Retina MacBook Pro very soon and I'd like to purchase an OS X app that requires 10.8, since it's currently heavily discounted.
Is there any way to force purchase it on my 10.7.5 system so that I'll be able to use it when I upgrade to a new Mac?
Thanks!

No.
GB

Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

AFAIK, there's no app that'll clone the Mac and PC volumes so you can restore them. System Image Utility.app or Deploy Studio for Mac and Ghost for PC are needed. See these for starters:
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
http://blog.macadmincorner.com/
http://lists.apple.com/archives/System-imaging/

Is there any way to force Sun C++ Preprocessor preserve whitespace?

Hello!
I'm preprocessing simple source file:
void test()
int i;
}with command: CC -E test.cpp
and CC preprocessor eats all whitespace at the beginning of each line, like this:
void test()
int i;
}Is there any way to force CC preprocessor preserve whitespace?

You cannot use the C preprocessor on C++ code, for at least two major reasons.
1. The default -I options in CC are not the same as for cc. Try adding
#include <iostream>
#include <cstdlib>
to your example.
Even if you add the missing -I options, the conventions for finding the C++ standard headers are not known to the C preprocessor.
Example:
% cc -P -I/opt/SUNWspro/prod/include/CC/Cstd -I/opt/SUNWspro/prod/include/CC -I/opt/SUNWspro/prod/include/cc z.c
"z.c", line 2: cannot find include file: <cstdlib>
cc: acomp failed for z.c2. The predefined macros (-D options and predefined macros built into the compilers) are different for cc and CC.
In particular, the C compiler predefines macros saying it is a C compiler. The C++ compiler predefines macros saying it is a C++ compiler. Code that is conditionalized on whether it is compiled by the C or C++ compiler will give different results. If you add -D options for C++ macros, the results will depend on the way the tests are coded. That is, testing for a C compiler or a C++ compiler will not give mutually exclusive answers, as they would if you use the correct compiler. The Solaris headers have conditional code for C and C++.

IS THERE ANY WAY TO FORCE KEY COMMIT

Hi:
Is there any way in forcing when inserting/updating a record in a block to call KEYCOMMIT. For Example, if the user inserted/updated a record and before saving the user may quit the form. I would like to enforce the keycommit trigger to be called when the form is opted to close.

Hello,
Try the following in Key-Exit trigger:
BEGIN
IF :system.form_status = 'CHANGED' THEN
DO_KEY('COMMIT_FORM');
ELSE
EXIT_FORM(NO_VALIDATE);
END IF;
END;
Regards,
George
Hi:
Is there any way in forcing when inserting/updating a record in a block to call KEYCOMMIT. For Example, if the user inserted/updated a record and before saving the user may quit the form. I would like to enforce the keycommit trigger to be called when the form is opted to close.

On a large monitor, the bookmarks toolbar is opening outside of the Firefox window itself - is there any way to force it to stay inside?

Recently I installed Windows 7 on my computer, along with a device called a Triplehead2Go, which spoofs the operating system into thinking that the computer has one monitor attached (when it really has three). When the Firefox window is relatively small on the desktop and with excess space to the right, the bookmarks toolbar opens to the right (and extends outside of the window). This creates a problem for me, as the monitor bezels get in the way of navigation. When the Firefox window is all the way to the right of the desktop, the bookmarks toolbar opens inside of the window (as there is not enough space to the right for it).
Is there any way to force this menu to stay within its boundaries?

The screen dimensions are "right," but I don't want it to use up any more space on-screen than is in the window.

HT204057 is there a way to use time machine with a backup drive connected to my AirPort?

is there a way to use time machine with a backup drive connected to my AirPort Extreme?

Unfortunately, this is not officially supported by Apple......if you still have the 4th Gen AirPort Extreme that you list in your equipment profile.
However, the new "tower" shaped version of the AirPort Extreme does now officially support Time Machine backups to a drive at the USB port of the device.

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Is there any way to force time machine to keep retrying after disk i/o error?

Similar Messages

Maybe you are looking for