Is there any way to generate table of contents in adobe for a report output

Hi All,
I need to display the output of a report in an PDF and layout needs to be developed in Adobe Print Forms. I want to know if there is a way to generate a table of contents for the output in adobe form on a particular page.
Thanks...

Hi,
Thanks for the reply. I am new to the adobe and to the javascript.
I would appreciate if you can guide me as to where can I get the online help on javascript related to Adobe Print and Interactive Forms.

Similar Messages

Is there a way to generate table of contents into page links?

I have created a PDF document from a data modeling tool. After the document is created I am looking to generate page links en masse from the table of contents to the appropriate referenced page. I know I can add links one at a time, but that is too time consuming. Please give me a clue, this is driving me crazy. Thanks for any help.

Hi,
Thanks for the reply. I am new to the adobe and to the javascript.
I would appreciate if you can guide me as to where can I get the online help on javascript related to Adobe Print and Interactive Forms.

Is there any way to create table of more than 30 char length name

hi all,
Please tell me is there any way to create table of more than 30 char length name in oracle 10g
Regards

Hi,
If you want table name to be more than 30 Char.
I am sure,your naming convention is not upto the mark.
Its not possible in 10g as well as in 11g.
Thanks
Yogesh Nagle
India

Is there any way to generate Gantt chart by using oracle 9iDS?

Is there any way to generate Gantt chart by using oracle 9i reports builder
Can you please send me the link or more information on oracle 9iDS.
Thanks

Hi,
Oracle9iDS itself doesn't support creating Gantt charts. The option oyu have is to use Oracle Graphics 6i, because there is no Graphics in 9i, and configure it to run with Oracle9i Forms. There exist a whitepaper at otn.oracle.com/products/forms that explains how to make Graphics 6i work with Forms 9i.
Frank

Is there any way download i-table in debug mode?

Hi Experts.
I'm curious if there any way download i-table to local computer in debug mode.
could you let me know that method?
currently using basis 640, bw3.5 version.
Thank you.
Lee.

Hi Lee,
This is easy...if you are using the Advanced Debugger then just double-click on the table in the source code and then go to the tables tab....
Then right click and there's an option to download it to a local file....! Then specify the format and the path....and thats it...!!
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Is there any way to get tables data with out having backup.

Hi !
my tnslistner is not working that is why i am not able to login in my database
so i have planned to reinstall it and if posible get my database back from old files.
i do not have backup,
is there any way to get tables and data back.
yours sincerely

the out put of the sqlplus/ as sysdba is as followes
Error 6 initializing sql*plus
sp2-0667: message file sp1<lang>.msb not found
sp2-0750: you may need to set ORACLE_HOOME to your oracle software directory
the listener.ora at
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = abc)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
yours sincerely

Is there any way to launch Shared Services in command prompt for migration?

Hi All,
We are on 11.1.1.1.3 Is there any way to launch Shared Services in command prompt for migration purposes? The purpose is we need to automate the migration process from Dev to Prod. Currently we are exporting artifacts by using LCM in shared service by file management and then exporting that folder to prod server and then importing by using LCM. So we need to automate the whole process.
So is there any way we can launch shared services/LCM in command prompt to launch the migration for export/import artifacts?
Any suggestions will be great help.

Did you see the bit in the documentation called "Creating Migration Definitions"?
See: http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management/ch06s03s01.htm
Also, if you follow this link, the docs explain how to (sort of) generate the xml:
http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management/ch06s03.htm
Regards,
Cameron Lackpour

Is there any way I can rotate pdf's in Adobe Reader?

I want to use Adobe Reader to view drawings when out on site, but they often open in portrait when they should be landscape. Is there any way I can rotate the view?

Adobe Reader does not have a built in way to rotate the view, but iOS allows you to set the slider next to the volume control on your iPad to lock rotation of the device. You could set that to control rotation, and when you open a document whose pages are rotated, you could lock the device rotation, then rotate the deivce to view the page.
Dennis Griffin
Adobe

I accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?

i accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?

Howdid you buy iPhoto originally? Did it come preinstalled on a new macwith MacOS X 10.7 or later? Then you can download it from the Purchased tab of the AppStore:
See: OS X: About OS X Recovery
Restoring iLife applications after Internet Restore of OS X
If your computer came with OS X Lion or later and you erase your hard disk and install OS X, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
Choose App Store from the Apple menu.
Enter your Apple ID and password when prompted.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your computer. Your account will not be charged for them. Click Install to complete installation of your applications.
If your Mac came with an earlier system, reinstall iPhoto from the bundled application installation disk.
And if you bought an iLife disk, use that to reinstall.

Is there any way to edit the standard Firefox context menu for displayed Web pages?

Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

You can remove entries in the context menu with code in the userChrome.css file
*http://kb.mozillazine.org/userChrome.css
Some IDs are listed in this MozillaZine Knowledge Base article:
*http://kb.mozillazine.org/Chrome_element_names_and_IDs
To find the ID of others you will have to use the DOM Inspector.
* https://support.mozilla.org/kb/DOM+Inspector
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

Having recently updated Firefox, there now seems to be a long delay before many webpages load. Is there any way to easily revert to the previous arrangement, for example by removing new features that came with the upgrade that I probably don't use?

Having recently updated Firefox, there now seems to be a long delay before many webpages load. Is there any way to easily revert to the previous arrangement, for example by removing new features that came with the upgrade that I probably don't use?

Having recently updated Firefox, there now seems to be a long delay before many webpages load. Is there any way to easily revert to the previous arrangement, for example by removing new features that came with the upgrade that I probably don't use?

I bought music on my iPhone but lost it when I connected it to a new laptop is there any way of getting is back without paying again for it?

I bought music on my iPhone but lost it when I connected it to a new laptop is there any way of getting is back without paying again for it?

Was the content not synced with a computer previously? If it was, simply re-sync with that computer.
Syncing an iDevice to a new computer will do exactly what you describe above as this is not the way to move content to a new computer.

Is there any way to map tables in rutime dynamically?

Hi
Thank you for reading my post
My question is mostly technical and i want to know whether with EJB 3.0 (JPA) can do this or not.
we have an application which we are going to port it to EJB 3.0 from plain JDBC.
In our application, we have tables which are created after we complete the code,
Tables are created in customer environment based on thier requirement. we store all details about tables in our metadata system. this details contain table structure and business roles for that tables
So, We have some tables which we know all of its details but we do not have access to application to recompile it or do mapping procedure again.
And we need to store records into those tables and also perform EJB Query on them.
What i want to know is:
-Is there any way that we could map them dynamically in runtime?
-How we can query them if we can not map them programically?
-What will be the query result? it is a collection? if it is a collection, then what are collection elements?
Thanks

Thank you for reply.
We have some tables that are added to our system after we developed the core application.
Now we need to access those tables using EJB 3.0 .
We can not predict what kind of tables will be added, when customer add those table they also provide vast amount of metadata that our application need.
before we think about moving to EJB 3.0, we used JDBC to handle CRUD on those new tables based on metadata that customer file into our core application.
Now that we thought to move to EJB 3.0, we do not know how to handle those new tables that cutomer define.
We can not predict what kind of table they will create, so we should find some way to :
Create all required EJB 3.0 artifacts from
-A database Table
-and business metadata that customer file into our core application.
when we had JDBC, we could create dynamic SQL statement using table name and those meta data. but now with EJB 3.0 we can not find a way to do this because EJB 3.0 need some java class to be present before we could map anything.
Thanks

Is there any way to generate random number in CPO

Requirement : -
> I want to generate a random number from set of 1-9 numbers .is there any way in cpo ?
Thanks
Siva

I created a process that uses 3 steps, all of which happen inside the engine rather than having to span out to a script, so it runs a lot faster.
Technically, it's pseudo-random...
Predefine Output Variable "Random Number" as type "Numeric"
Step 1: Format Date
Format string: fffffff
(that's seven lower-case letters "f")
Original date: [Process.Start Time]
Step 2: Format Date
Format string: ff\0\0\0\0\0
Original date: [Process Start Time]
Step 3: Set Variable
Variable to update: [Process.Variables.Output.Random Number]
New value: ([Workflow.Format Date.Formatted Date]-[Workflow.Format Date (2).Formatted Date])/100000
This returns a basically random number between 0 and 1 (so you can mulitply it by your maximum value) based on the numeric fraction of a second of the start time of the process.

Is there any way to talk to a person at Adobe?

Is there any way I can talk on the phone with a support person at Adobe. I'm at my wits end trying to get an answer to my problem and I'm getting nowhere!

I tried that and I was told that chat is not available to me because the version I'm using is old.

Is there any way to generate table of contents in adobe for a report output

Similar Messages

Maybe you are looking for