Is there any way to get Mountain Lion to run on 2014 MacbookPro?

I'd like to do this as some software I use ( Vectorworks ) wont run on Mavericks?
Thanks

There are software components in Mavericks that are necessary to introduce new hardware support found only in mid-to-fall 2013 Macs. It would be time and resource prohibitive to re-engineer new hardware support into OS X releases older than that which came with the current generation of hardware. No one is going to reverse engineer Mountain Lion for you.
Nemetscheck is in business to stay in business. I think you under-estimate their software engineering demands and what it takes to properly support future product changes in operating systems and graphics support. A few lines of code ... I seriously doubt that premise.
Like anything else in this life that costs money, you can earn more, play, or fold.

Similar Messages

  • Is there any way to install Mountain lion on my 3 1/2 year oldMacbook Pro which is running OS 10.5.8 with a 2.5 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM?

    When I went to the Apple Store I got a reply that I needed a more advanced OS, I believe it wanted OS 6.6.  I had tried to upgrade my OS in the past and was told the machine cannot handle it...
    Any help or suggestions would be most appreciated.
    I have been planning to buy a new Desktop with a 27 inch screen and an iPhone 5 when available.  It is beginning to seem that this is the time for the new computer.  I will use my iPad 2 as my travelling device.  I basically use the computers for email and some writing, nothing fancy.
    Barak88

    Hi Carolyn, thanks for your quick reply. First thing I did before posting my question was to check the system requirements for Creative Suite, both on Apple and Adobe's websites. But I am however confused about the difference between "Multicore Intel processor" vs "Core 2 Duo", and keep hearing stories about CS5 not working properly.

  • Is there any way to get back my data if I had not restored it from time machine before reinstalling Mac OS X on my comp from utility. PS - My OS version has downgraded from Mountain Lion to Mac OS X 10.75  . Pls. help

    Is there any way to get back my data if I had not restored it from time machine before reinstalling Mac OS X on my comp from utility. PS - My OS version has downgraded from Mountain Lion to Mac OS X 10.75  . Pls. help

    Look at the blue box on this link:
    http://pondini.org/TM/19.html
    Ciao.

  • Is there any way to get ichat back with mountain lion? also is there a way to have multi-person video chats with messages?

    is there any way to get ichat back with mountain lion? also is there a way to have multi-person video chats with messages?

    There is no way that I know of to install iChat because it is not supported in ML. You may want to read a couple of these Threads
    https://discussions.apple.com/thread/4143616?start=0&tstart=0
    https://discussions.apple.com/thread/4151787?start=0&tstart=0

  • HT4757 Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1?  Is there any way to get my camera compatible with this computer?

    Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1?  Is there any way to get my camera compatible with this computer?

    First Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that doesn't help apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
    Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
    This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • I'm not crying. Is there a way to install Mountain Lion on a bootable disk on latest iMac cuz mine shipped without an OS?

    I could cry right now. After decades of being an Apple fan, something is happening for the worse and issues with every Apple product I own 2 iphones, 2 iMacs, 15" Macbook Pro, and iPad Mini (no issues here, just slow connecting to App Store and can never seem to download updates)  has left me disenchanted. I do have a question about Mountain Lion but just airing out grievances.
    Ok, to the point. I have the new 27" iMac that was just released. Was delivered and opened the box, turned it on, and there was a flashing folder icon. No OS, wonderful. I live in Brooklyn and not trying to lug a 27" computer onto the train nor should I have to pay for a cab to resolve this. Anyway, I tried to go into Recovery but it started doing an Internet Recovery with a download time of 9 hours. Um, no thanks. So I downloaded the latest version of Mountain Lion from the App store on my old iMac and made a boot disk onto an external via Apples instructions. Plugged it into new iMac lemon, go into recovery mode, see the bootable drive, click on it to reinstall and it gives me a crossed out circle icon and shuts down.
    What am I doing wrong? I have pretty decent broadband and did start the internet recovery process now until I find a better solution online. After 5 hours, Internet recovery finished and clicked on Reinstall Mountain Lion to which it's asking me to download the OS again and with a 13 hour download time!!!! What's going on here? What was the purpose of internet recovery taking 5 hours only to download it again at another 13 hours???
    Question is, is there something I should be doing differently? Is there a way to install Mountain Lion from a bootable disk? This is mind blowingly the dumbest thing I've encountered with Apple. Got a problem with your OS? No problem, just download a 4.4GB file every incident.
    Thank you.

    You can't grab a installer from another Mac and expect it to run. The newer Macs have newer hardware which requires special drivers. If the version that boots the iMac is a special build, it won't work any other way than Internet Recovery.
    If it was me, I'd take it right back. You have no idea if the OS is just corrupted, the hard drive is dead, or what. I wouldn't take my chances with it.

  • I accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?

    i accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?

    Howdid you buy iPhoto originally? Did it come preinstalled on a new macwith MacOS X 10.7 or later? Then you can download it from the Purchased tab of the AppStore:
    See:  OS X: About OS X Recovery
    Restoring iLife applications after Internet Restore of OS X
    If your computer came with OS X Lion or later and you erase your hard disk and install OS X, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
    Choose App Store from the Apple menu.
    Enter your Apple ID and password when prompted.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your computer. Your account will not be charged for them. Click Install to complete installation of your applications.
    If your Mac came with an earlier system, reinstall iPhoto from the bundled application installation disk.
    And if you bought an iLife disk, use that to reinstall.

  • Is there any way to get the height/width of an image before importing it in the indesign document.

    Hi All,
    I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
    I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
    I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
    Is there any way to get the height/width of image without importing it in the indesign document.
    Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
    At this point I am clueless where to search next.
    Any help will be appriciated.
    Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
    Thnx,
    D.

    You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
    Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
    For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
    Perhaps Quicktime could provide you with a platform independant solution.

  • Is there any way to get the appStore link for my application

    Hi everyone , i am developing an app which has a feature of sharing its appstore link with the friends through mail,so that they can see my appplication in appstore and buy it directly on click of a button. For that i need to use the app store link of my application for sending it . is there any way to get that and using it dynamically in my app immediately after releasing it.

    Your best bet would be to create a web page of your own for the app. Design that page so that it uses 'META REFRESH' to redirect the visitor straight to the App Store link.
    That way you can hard-wire your own web page address into your app.
    This has the advantage that it can work well even before you've noticed that your app has arrived on the App Store. Create a real web page, describing the app and telling people to search for it in the App Store by name - then replace it with the auto-redirect page when you've discovered your application's App Store address.

  • HT1386 i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

    i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

    No there's not.  Otherwise that wouldn't be very secure, would it?

  • I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/856718]]</blockquote>
    I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?
    Also, is there any way to save a group or an open session and then restore it later?

    History menu, if it was destroyed in the last session
    then use "Restore Previous session:" and then restore all windows also from the history menu.
    If done in this session try the restore all windows under the history menu.

  • Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

    I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
    This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
    =====
    %PDF-1.5
    %‚„œ”
    2 0 obj
    <</Length1 15628/Length 10121/Filter/FlateDecode>>stream
    xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Ç䆆¢≤)
    ¢Ääƒet\FeûN࣌∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

    HI jlawrence1,
    Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

  • Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

    My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
    It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

    thank you for the tip.
    Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
    Thanks again for the help.
    jglaiche

  • Itunes deleted my 30 gigs of music and I didn't have it saved in itunes or on computer, is there any way of getting music back?

    Itunes deleted 30 gigs of music from my ipod. And I don't or didn't have it saved in Itunes or on my computer....is there any way of getting my music back? Alot of the music was not purchased from Itunes....mostly from cds I dont have anymore! PLEASE HELP!

    If the lost music is no longer on your iPod, on your PC, or in another backup somewhere, you are out of luck.  You can download most iTunes purchases again at no cost via iCloud.  See this article for more information and assistance.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    For non-iTunes purchased content, you'll need to redownload or rerip them from their original source.
    B-rock

Maybe you are looking for

  • Row and column headings

    How can I keep my row and column headings fixed on the screen while I scroll through the rest of a large spreadsheet?

  • Nvarchar field in SQL not showing up in BVM

    Hi All, I have some fields which are dclared as nvarchar in SQL and i have used cast function to get them as strings into CR. Now i want to create a Dynamic parameter in BVM. In the Business Element level,i am having the same issue as the data type i

  • IOS8 problem

    My iPad was functioning normally, but from last 10-12day its restating 4-5 times in a day while using it. This problem started  after upgrade iOS7 to iOS8.

  • Licensing & Installation Concept in SAP

    Hi Gurus, Our company has purchased a complete Software Package of Netweaver 2004s SR2 with ERP 2005 SR2, IDES ERP 2005 SR2, SRM, CRM, SCM, Solution Manager 4.0 We've already installed the IDES ERP 2005 SR2. Now my question is as you all know we have

  • Can you specify the RH version from a command prompt?

    When using command prompts to generate WebHelp output, is there a way to specify which version of Robohelp will be used? Here's the situation: We recently upgraded all of our help projects to RH8, installed RH8 on our software build server, and are n