Is there any way to get my mac to read an unfinalized dvd

Is there any way to get my mac to read an unfinalized dvd made from a dvd recorder a few years ago?

Not that I'm aware of. I'm curious: is it a DVD-RW type of DVD, by any chance?
Message was edited by: Radiation Mac

Similar Messages

Is there any way to get more than 99 tracks on a DVD?

I am limited to 99 tracks in my iDVD project. is there any way to add a new Title so that i can add more? I know that there are DVDs with multiple titles, each title holding up to 99 tracks. anybody know how?

Sounds like you may need the storage capacity of a Blueray burner and disc to meet your objectives as outlined above. Unfortunately there is very little to no support on most macs for burning such a disc (short of using DVDSP) and then only with limited success.
Assuming you must use a mac and consumer software plus standard 4.7 GB DVD-R media (Verbatim or Maxell for example)I think Roxio Toast may be able to help you but I'm still looking at the exact procedure/s in which to accomplish the above objectives of adding about a dozen movies per menu. Here a few links I have reviewed so far:
http://www.amug.org/amug-web/html/amug/reviews/articles/roxio/7/
http://www.roxio.com/enu/products/toast/titanium/overview.html
http://forums.support.roxio.com/lofiversion/index.php/t21466.html
http://forums.support.roxio.com/lofiversion/index.php/t26939.html
I'll also post back later with more info.

Is there any way to get my Mac back to normal?

Hi,
I posted this under intel iMac but it was suggested I come here for help. I've pieced together all the info from that post.
My sister was using my computer and wanted to use Windows XP Professional Service Pack 2 in VMWare so booted a CD of Windows on my machine. There was a part that said you could put XP on the partition available so when she hit Enter it said that it couldn't be done but that she could go back and delete that partition and then reinstall it there. So she did that and then installed Windows on there.
Now everytime I turn my Mac on I get Windows XP. How do I get back to my Mac system?
I tried turning the Mac on and then holding down the option key as it started up but the only thing I get is an icon with the hard drive and the word Windows below it and an up arrow which I push and then it takes me right back to WindowsXP.
Right now I'm thinking my only option is to reboot from my original OSX install disk and don't think Keep User Preserved Setting will work because it's all been erased by Windows right? I know if you unplug and plug your Mac back in you get a file in the trash that says Recovered files and I haven't unplugged it at all.
I went to the C:/ drive and with my mouse hovered over it is says free space is 146 GB and Total size is 149GB and my intel Mac was 160GB large. Also tried sticking in my OSX install disk and hitting C after start up thinking I could try the save User preserved settings but I saw the hard drive icon and then a yellow triangle sign with a question mark that said I would have to hit Options to delete stuff and I hit that to see the buttons and it said erase, cancel and something else. It said it would fresh install stuff. I ejected the CD out right away and didn't go any further.
Is this fixable to get it back to the way it was or have I lost everything? If so if I brought it in to a Mac technician could they bring my files back?
What about using Prosoft Data Recovery X? I don't have an external hard drive but could get one and I am using my sister's Powerbook PC at the moment.
S.

I reposted the question here where I'm getting advice:
http://discussions.apple.com/thread.jspa?threadID=1302031&tstart=0
S.

Is there any way to get back my data if I had not restored it from time machine before reinstalling Mac OS X on my comp from utility. PS - My OS version has downgraded from Mountain Lion to Mac OS X 10.75 . Pls. help

Is there any way to get back my data if I had not restored it from time machine before reinstalling Mac OS X on my comp from utility. PS - My OS version has downgraded from Mountain Lion to Mac OS X 10.75 . Pls. help

Look at the blue box on this link:
http://pondini.org/TM/19.html
Ciao.

I'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

What is the source & link to this 8 GB kit please?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547

I used to be able to select an arbitrary "column" in MS Word, but since upgrading to OS 10.9.4 and MS Word for Mac 2001 v. 14.4.3, it doesn't work anymore. Is there any way to get this handy functionality back?

I used to be able to select an arbitrary "column" in MS Word, but since upgrading to OS 10.9.4 and MS Word for Mac 2001 v. 14.4.3, it doesn't work anymore. Is there any way to get this handy functionality back?

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

HT201364 i have all the requirements except 8gb of available space. my mac only has 4gb capacity.is there any way to get a smaller version of the mavericks software?

I have all the requirements except8gb of available space. my mac only has 4gb capacity.is there any way to get a smaller version of the mavericks software?

That refers to free disk space, not RAM. If your computer has 4GB of RAM, that's enough. If it only has 4GB of free disk space, you need to delete content from the internal drive; for best results, free up at least 20GB.
(97356)

I just lost all of my calendars on my mac. Is there any way to get them back?

I just tried to sync my calendars on my mac to my Android phone using SyncMate, and all of the calendars on my mac are gone. However, they are stil on my ipod touch, atleast the last several months worth of events are. There was a lot of important information in there. Is there any way to get them back onto my mac? They were not backed up to a disk or on Mobile Me (my fault). Any help will be much appreciated. THANKS

Restore the phone from a backup made when they were present.

HT1766 Hi, my daughter connected her iphone to my mac, and lost all pictures, music etc. is there any way to get this information back?

Hi, my daughter connected her ipone to my mac and lost all of her pictures, music, etc. is there any way to get the information back?
<Edited by Host>

Does she normally sync to the MAC? IF she does, she can restore her phone from a backup, if she has one.
If she doesn't normally sync to the MAC then she can sync back to her PC and then restore to her backup.
If those options don't work then she is sol

Just bought refurbished mac, and there's no GarageBand or iMovie and such. I got no disks with the laptop!! Is there any way to get these programs back?

is there any way to get the programs back??!!??
if not, are there any good free programs to replace these ones?

I called Apple Customer Support (1- (800) 767-2775) to check on how much they charge for the gray restore disks that originally came with the MacBook and was quoted $16 dollars per disk plus S & H. Which would be $32 for the two disks. Just give them the serial number of your MacBook and they'll know which ones you need. With the original disks you also get the iLife that was current when your MacBook was bought included on the #2 disk.
If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store if you're upgraded to 10.6.8. iPhoto, iMovie or Garage Band for $15 each
Or you can get an iLife DVD on eBay. http://www.ebay.com/sch/i.html?_trkparms=72%253A1234%257C66%253A2%257C65%253A12% 257C39%253A1&_sacat=0&_sc=1&_nkw=apple%20ilife%2011&_sop=12

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
=====
%PDF-1.5
%‚„œ”
2 0 obj
<</Length1 15628/Length 10121/Filter/FlateDecode>>stream
xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Çä††¢≤)
¢Ääƒet\FeûNà£Œ∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

HI jlawrence1,
Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

Is there any way to get my photos FROM my iPod Touch back onto a new hard drive?

My Mac crashed last Friday. First timeIs there any way to get my photos FROM my iPod Touch back into my new hard drive. The iTunes sync only goes one way from the computer to the iPod.
It syncs the photos taken with the iPod (really an old iPhone 3G without phone service) but not the folders which I synced from the old hard drive to the iPod over the past year.

thank you for the tip.
Yes, my computer was backed up. for reasons way too complicated to go into here, these particular folders were not part of the backup.
Thanks again for the help.
jglaiche

Is there any way to get 720x576 (ie DV Pal) from iphoto slideshow?

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow? I want to export 200+ photos with random transitions and the ken burns effect. Imovie offers offers automatic ken burns effect via project properties but I can't find a way to add random transitions automaticcally. Is it possible? I want to add the exported file to a movie in Final Cut Studio. Normally I have to resort to using adobe photoshop elements 5 and premiere elements 3 on my bootcamp partition. I would love to do this all in Mac OSX - since leaving Windows, this is the only thing that forces me to use that lousy operating system!
Thanks in advance for any help.

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow?
Not directly. But you can do it with a bit of external help. Create a slideshow project in iPhoto using the "Random" transitions and auto KBE you want. Then export the slideshow as a 640x480 MPEG4/AAC 30 fps full motion MOV file. Drop the file to MPEG Steamclip and select the "Export to DV" File menu option. The select the DV format, PAL standard, and aspect you want. (I would normally select the "Frame Blending" option in the main menu when going from 30 fps to 25 fps.)

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

Is there any way to get my mac to read an unfinalized dvd

Similar Messages

Maybe you are looking for