Is there any way to get true "actual size"?

The "actual size" view on my new 20" Apple cinema display is only 75% of actual size in all of my layout/image programs. Is there any way to fix this?
I posted a similar topic earlier, but no one has responded.
Your help would be greatly appreciated.

I assume you are referring to the 72 point-per-inch legacy standard. The only way I know to get there today is to use an old 21" CRT monitor and set it to 1024 x 768. But I am not really sure you would like the end result. Pretty retro.
Tiger has an undocumented facility to independently scale the UI to any screen DPI (dots-per-inch). There was supporting software for this on one of the developer's CDs. You can read about that here:
http://appleinsider.com/article.php?id=610
Even better is that 10.5 is rumored to have this feature fully implemented. That would be great. It will clear the way for monitor resolution to climb higher without further damaging WYSIWYG, or "actual size" as you call it.
http://tinyurl.com/ogut7

Similar Messages

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Is there any way to get a actually phone number?

Is there a way to get a real phone number with my area code to generate to my ipod touch. I hope you can help me. Please respond quickly

There are apps to give you a number, but it would not be a "real" number provided by your carrier. It requires Internet to use, due to the fact that the iPod does not have a cellular antenna.

My new iphone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete it on my phone and vice versa. Is there any way to get a true synch?.

My new iPhone 5 email is synched with my home office computer Outlook email using a POP account, but deleting an email on my computer does not delete the email on my phone and vice versa. Is there any way to get a true synch?.

POP does not support synchronization between the server and clients. You will need to use IMAP or Exchange Active Sync if your email provider supports it.

ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Is there any way to get a Smart PlayList to sort automatically

I have a smart playlist that consists of Podcasts by certain Authors. I'd like to have it sorted by release date, so I listen to them in order, oldest first. Is there any way to get the smart playlist to sort that way automatically? Right now i can't really figure out how it is sorted, it seems somewhat random to me.
Thank you. Tom
Windows XP

yes, and it is actually quite easy. just make a smart playlist that is like this:
First Field: Podcast is true
Second Field: Name Contains (something present in the names of all of the podcasts you want)
There will be a check box next to "Limit to...". check the box, and set the number absurdly high, and then change "selected by random" to selected by most recently added. create the playlist. after it is created, right click on the name, date, time, album, genre... bar, and select "Date Modified" once it is there, click on it and it will allow you to arrange them either ascending, or descending. that should do it.

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

When closing multiple tabs, is there any way to get back the option of saving those tabs OR NOT for your next session, within the warning dialogue box itself?

For brief period of time, not in FF4, there was the option whereby when I closed multiple tabs, a firefox dialogue box opened warning me that I'm about to close multiple tabs, '''AND ALSO''' asking me if wanted to save those tabs for my next session, or trash them.
The primary issue IS NOT about saving tabs. The primary question here is about getting THE OPTION back to the CLOSING MULTIPLE TABS WARNING DIALOGUE.
The use case here should be obvious. However, since it is clearly not obvious that different people work in a variety of ways, and neither of those methods of working is "wrong" or "right" I will elaborate: Some people, for whatever reason, it doesn't matter why, want to save all their tabs on some occasions, and on other occasions don't.
This preference varies throughout the day. Therefore it is inefficient to constantly go to preferences and change whether or not I want firefox to open all my tabs from my last session. It is more LOGICAL to place an option in the multiple tab warning dialogue as well, for people whose preference constantly changes.
This option was available for a time in most of the Firefox 3 versions. Is there any way to get back this option in Firefox 4?

Firefox 4 saves the previous session automatically, so there is no need for asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
You can set the warn prefs on the <b>about:config</b> page to <b>true</b> via the right-click context menu or toggle the value with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />

Is there a way to get the actual XML string when using the JAXP SAX Parser?

Hi All,
I am using a JAXP SAX xml parser and am looking for a way to get the actual line of xml that is being parsed from within a content handler.
Here's my scenario. Consider the following example xml document.
<formCollection>
   <form name="myForm">
      <text/>
      <selection/>
   </form>
   <form name="anotherForm">
      <text/>
   </form>
</formCollection>My hope is to validate the entire document and then insert an xml string containing each "form" element (and its sub-elements) into a map for later use. My thought was to create a String as each "form" element is being parsed (begining with the form's startElement event and concatenating until the form's endElement event is reached) and then inserting this string into the map. Is there a way to get the actual line of xml that is being parsed, rather than just the element name and attribute values?

DrClap wrote:
YouRang wrote:
2. The first handler would validate the entire XML document, extract the "type" attribute from each <form> element, and place each <form> element and its sub-elements into the map of Strings, using the "type" attribute as the key. The second handler would take a <form> element and parse it into a Form object for the display. This option was the impetus for my question because it relies on the first handler being able to access the entire <form> element XML String and write it to a map.I don't see why you need the raw data from the XML document here. You should already be abstracting your data into Java classes in the first handler, instead of making the second handler do the parsing all over again.Correct, I am not referring to XForms. In this case, it happens that I am using the XML to generate an SWT ScrolledForm object and, thus, the XML element name happens to be named "form." However, the concept/design problem could apply to any type of object and the XML element could be appropriately renamed.
My experience with XSLT is limited and I haven't done anything with it for several years. With that said, it seems that it is primarily used for generating web content, which wouldn't apply in this case because this is for a client-server application. I could be off base on this one -- if XSLT applies to much broader translations and would be more appropriate for generating Java objects than my current methodology, I could certainly look into it further.
I apologize that option two didn't make more sense; it is difficult to explain. Yes, optimally the data should be abstracted into Java classes in the first handler. This is really an elaboration that I failed to specify when explaining option one. The problem is that the user can choose to create any number of "forms" of any type. For instance, let's say that from the File -> New menu there are options for seven different types of forms and each form is used to send completely different data. The user can select form1, select form1 again, select form4, and select form7 (or any other combination) and bring up tabs that display the different forms. The user can then enter data and submit each form separately. When the user selects File -> New -> FormX, a SWT ScrolledForm object that corresponds with FormX must be given to the display. Because SWT ScrolledForm objects do not allow a deep copy, I cannot simply read the XML <form> elements at initialization, parse them into ScrolledForm objects, and pass deep copies of the ScrolledForm objects to the display each time the user clicks File -> New -> FormX. The only simple way I see of getting a new copy of a ScrolledForm object is to reparse the appropriate XML <form> element in order to create one each time the user selects File -> New -> FormX. As such, one handler would need to read the entire XML document and parse the <form> elements into a map (or some other data structure) and another handler would need to parse individual <form> elements into SWT ScrolledForm objects. The first handler would be called at initialization and the second handler would be called each time a user clicked on File -> New -> FormX. Once again, this isn't exactly my favorite implementation... but seems the simplest given that there is no way to do a deep copy of an SWT ScrolledForm object. Hopefully that makes a little more sense. No worries if it doesn't -- I just figured I'd throw this out there and see if anyone had a better idea.

Is there any way to get windows environment variables like %USERNAME% with javascript?

is there any way to get windows environment variables like %USERNAME% with javascript using Adobe 10 pro?

There is a fair amount of Acrobat JavaScript and Acrobat knowledge need to sort all of this out.
The identity object holds a lot of sedative information. First, upon installation of Acrobat, only the login name is available in the identity object and the end user of the application needs to complete the "Name", "email" and "Organization Name" in the application's preferences. These are the only fields that are available to Acrobat JavaScript identity object as corporation, email, loginName, and name.
Using the instructions in The Acrobat JavaScript Console (Your best friend for developing Acrobat JavaScript) you can run the following script in the JS console to see the items of the identity object:
for(i in identity) {
console.println(i +": " + identity[i]);
and the following will appear in the console:
loginName: georgeK
name: George Kaiser
corporation: Example
email: [email protected]
true
The documentation states you need to use a trusted function to access this data, but you can access it at startup of Acrobat/Reader and add the properties of the identity object to an array:
// application variable to hold the properties of the identity object
var MyIdentity = new Array();
// loop through the properties of the identity object
for (i in identity) {
// place each property of the identity object into an element of the same name in the Identity array
MyIdentity[i] = identity[i];
console.println(i +": " + MyIdentity[i])
You access the items with:
var loginUser = MyIdentity[loginName]; // get the loginName property
In the user application level JavaScript file. See Acrobat Help / User JavaScript Changes for 10.1.1 (Acrobat | Reader) for the location of the application level folder you need to use.
I would change the name of the array used in this post so an untrusted user cannot get to your data. Some of this data can be used in hacking into a user's system.

HT4993 I lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back.

lost all my notes in my iphone 5s and so i went to my ipad and pulled the notes up and seen them for a Sec then they were gone. Please is there any way to get my notes back?

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

Is there any way to get the appStore link for my application

Hi everyone , i am developing an app which has a feature of sharing its appstore link with the friends through mail,so that they can see my appplication in appstore and buy it directly on click of a button. For that i need to use the app store link of my application for sending it . is there any way to get that and using it dynamically in my app immediately after releasing it.

Your best bet would be to create a web page of your own for the app. Design that page so that it uses 'META REFRESH' to redirect the visitor straight to the App Store link.
That way you can hard-wire your own web page address into your app.
This has the advantage that it can work well even before you've noticed that your app has arrived on the App Store. Create a real web page, describing the app and telling people to search for it in the App Store by name - then replace it with the auto-redirect page when you've discovered your application's App Store address.

HT1386 i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

No there's not. Otherwise that wouldn't be very secure, would it?

I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/856718]]</blockquote>
I had 41 tabs open in about six groups over the last year and a half and I just close them and exited Firefox. Is there any way to get them back?
Also, is there any way to save a group or an open session and then restore it later?

History menu, if it was destroyed in the last session
then use "Restore Previous session:" and then restore all windows also from the history menu.
If done in this session try the restore all windows under the history menu.

Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
=====
%PDF-1.5
%‚„œ”
2 0 obj
<</Length1 15628/Length 10121/Filter/FlateDecode>>stream
xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Çä††¢≤)
¢Ääƒet\FeûNà£Œ∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

HI jlawrence1,
Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

Is there any way to get true "actual size"?

Similar Messages

Maybe you are looking for