Is there any way to grade a raw sequence on a framebyframe basis?

Ive shot some timelapse that goes day into night, and the only way to have it expose properly was to use the camera's auto settings which introduced some sporadic changes in exposure, basically just a few odd frames here and there. I've tried using colorista to correct it but it doesnt seem to have the same latitude as the camera raw program in after effects, but the raw program is limited to correcting an entire sequence and it can only show the first frame so i cant get to the frames that need correcting, or compare them to the correct ones if i just imported the incorrect frames and laid them down on the timeline. So is there any way to do this in after effects, or any plugins or programs that can do this?

http://www.gbtimelapse.com/
Especially read the theoretical blurb. Once you understand it, you should be able to draw the correct conclusions and construct your adjustments, even if you cannot manipulate camera RAW directly from within AE. In fact you may already solve part of the problem by batching it in Photoshop/ Bridge and working with automatic develop settings...
Mylenium

Similar Messages

Is there any way to use Compressor 4 with iMovie '11?

I'm a student filmmaker without the money for Final Cut Pro X. Footage from my Canon VIXIA HF S20 (AVCHD format) looks just about perfect when I import it into iMovie and when I cut together a project. However, when I finalize the project, the darker hues in my footage always come out pixelated and crappy. Whether it's 1080p or 480p, this is always the case.
I've been told that Compressor 4 does a much better job of encoding and exporting, but it's completely integrated with Final Cut Pro X and not iMovie. Is there any way I can take raw project files from iMovie and export them using Compressor? Or must I be forced to save up for Final Cut Pro X?

You should be able to use Compressor with iMovie - it's a standalone app - but, of course, there will be no "Send To" buttons. But I really doubt that it will help you much.
sdharwadker wrote:
However, when I finalize the project, the darker hues in my footage always come out pixelated and crappy. Whether it's 1080p or 480p, this is always the case.
Finalizing means that iMovie renders your video in different sizes. Have you tried to export or "Share to Media Browser"?
mish

Is there any way to upload RAW files from my DSLR camera to my iPad Air

I want to upload RAW files from my DSLR to my iPad Air for storage until I get hole to my Macbook. Is there any way to do this?

This http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter shoudl do it

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

I edit my photos in Photoshop, save as jpeg then import back into iPhoto. But if I add text to an image in Photoshop can't save as jpeg but as psd. Is there any way I can change to jpeg in iPhoto?

I edit my RAW photos in Photoschop CS3, save as jpeg then import back into iPhoto 11. If I add text in Photoshop I can't save as jpeg but as psd. Is there any way I can change to jpeg in iPhoto?

Terence Devlin wrote:
Yes you can. But you need to flatten it as jpeg doesn't support layers.
While the final JPEG can't have layers, it is not necessary to flatten the original Photoshop file to create a JPEG. There are two ways to make a JPEG while not losing the flexibility of preserving layers, and they both flatten on the fly while saving.
I just tried this in Photoshop CS3 myself. When I add a text layer, and choose Save, the Save As dialog box comes up and defaults to PSD as was described. But... that is just the default! Go ahead and choose JPEG from the Format pop-up menu down below the file list. JPEG is in there. So what happens to the layers? Notice when you choose JPEG, the Layers box grays out and the "As A Copy" box grays out and is checked (i.e. you cannot uncheck it). What is going on here is Photoshop will gladly make a JPEG of your layered file, but it will force the JPEG to be a copy, so as to not overwrite the original layered file. This is good, because your Photoshop file with its editable text layer is preserved, and you get a JPEG copy to put in iPhoto.
The second way is, instead of doing Save or Save As, choose File/Save for Web and Devices. This will also give you a JPEG choice, and also create an exported copy. Because this way makes files for the Web, they will be smaller than JPEGs from Save As because they will lack built-in previews (which you don't really need these days) and other extra metadata that take up space.
Either way you get a JPEG you can toss back into iPhoto.
Terence Devlin wrote:
Only by exporting.
The Export menu in Photoshop CS3 does not have any direct choices for JPEG.

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

SamanthaR22 wrote:
How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder? [Emphasis added.]
The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with. "Picture" and "Photo" now mean different things in different contexts. In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do. Understanding is the path that allows us to do it.
All pedantic, but please stick with me here .
You record a set of instantaneous data with a camera.
That data is processed by your camera and saved to a file.
The file format is usually either RAW or JPG.
You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
Aperture links the Image and the imported file.
The imported file is called, within Aperture, an Original.
Every Image has an Original.
The Image is not the Original. The Image is what you see in Aperture.
The Original is a file that is stored on your computer.
You can make changes to an Image.
Aperture calls these changes Adjustments.
Adjustments are saved to another file attached to the record in the database. Let's call this file the Changes File.
Aperture uses these two files attached to the record in the database to create the Image.
Image = Original + Changes File.
The Image is not a file.
Because the Image is not a file, it cannot be shared with other programs. It exists only inside of Aperture.
In order to share an Image with another program, you must first create a file of the Image.
You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
You may ask, "Why all the complexity? Why doesn't Aperture save Images as files?" The answer is simple: Images can require less — and in many cases very very much less — storage space than files of Images. Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file. The gain in storage efficiency is huge. The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
Here is your question reworded with more precise terms:
SamanthaR22 might have written:
How do I access Images in my Aperture Library in the Finder? I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
No, there is not. Images exist only in Aperture, and are not accessible for use in other programs. You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
Aperture does allow you to create and save within your Library share-able files of your Images. These files are called Previews. You specify the file parameters in Aperture Preferences on the Previews tab. These files are available to other programs via the OS X Media Browser. These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
HTH.
—Kirby.

Is there any way to recover accidentally deleted photos?

Adobe Photoshop Lightroom 5.6 running on Windows 7 PC.
After importing a group of photos including JPG and RAW files from a memory card (which was later reformatted), I noticed that the photos ended up in a folder on the wrong external drive. I tried to move them to another folder on the main drive using Lightroom and somehow deleted the original files. I can still see them in a Collection, but they cannot be edited or Developed as the underlying file cannot be found. Is there any way to recover these photos? Willing to listen to all suggestions. Thanks for your input.

Find an "undelete utility" (one such utility is called Recuva, but I have never used it) and see if it can recover your RAW photos. If you are going to do this, do not perform any other tasks on your computer except to find, download, install and run this undelete utility. If possible, download and install on a different drive than the photos were on. You can also try this undelete utility on your camera card.
While I'm at it, you might want to develop and implement a backup strategy, in which you don't delete from the camera card until you have TWO (or more) copies of your photos, on TWO (or more) different physical disks. And don't forget to back up your catalog file regularly and automatically.

Is there any way to save an iphone with water damage?

Is there any way to save an iphone 5 with water damage? I know older phones you could some times use rice to dry it out.

1, Place in ziplock bag with dry raw white rice for a week.
2, When that doesn't work take to Apple and purchase out of warranty replacement.
3, If you have already turned on the power the damage is done so just proceed to step 2.
Allan

Is there any way to recover a deleted sparse bundle?

I had an old sparsebundle (380GB) saved onto an external drive.
I wanted to keep this old sparsebundle,
but when I went to run a new Time Machine backup to this external drive it deleted the old sparsebundle.
Is there any way to recover this deleted sparsebundle.
As I began to run the new Time Machine backup, it changed the name of the old sparsebundle
from xxxxx.sparsebundle
to xxxx.purgeable
then POOF it disappeared.
I cancelled the new Time Machine backup as soon as I saw the file extension change to .purgeable,
but even though the new Time Machine backup didn't seem to start (I cancelled it in time),
the old sparsebundle is gone.
I ran Data Rescue and all it could find is a file that is only a few KILObytes called xxxxx.in_process.
It would take a long time for the 380GB sparsebundle to be overwritten,
so I don't think that happened.
But can the old sparsebundle be recovered (and be usable)?

A sparsebundle is a disk image.. if the actual file info is wiped then I really doubt you can recover it. Since you ran a recovery software which has worked recovering stuff for me.. and it couldn't find it.. your only hope would be real data recovery centre.. but although they can get raw data off the disk how useful it would be is questionable.. sorry but I think it is gone.

Is there any way for a formula to ignore other cells without data in them yet?

I'm trying to create a spreadsheet to track my grades. I have all the formulas set up (quizzes, tests, etc. are calculated separately because they are all weighted differently towards the final grade). The "Final Grade" formula has an error because some of the other sets don't have data in them yet (i.e. haven't taken a test yet). Is there any way to get the Final Grade formula to ignore the cells without data yet?
Formula for each category (quizzes, tests, etc): ((SUM [total point column]) / (SUM [total points possible column])) * 100
Formula for Final Grade: (([quiz grade] * 0.15) + ([test grade] * 0.25)) * 100

Hi badwolfgirl,
I agree with quinn that merged cells can lead to many problems. Here is a table with no merged cells
Two Header Rows, one Header Column and one Footer Row.
I have used Cell Fills (colours) to distinguish Quizzes, Tests, Final Exam and Projects.
Formula in Footer B8
=IF(SUM(C)=0,"",100×SUM(C)÷SUM(D))
if the SUM of C is 0 (zero), insert "" (NULL) to make it appear blank. Else insert 100xSUM(C)/SUM(D) to show the % score.
Formula in C8
=SUM(C)
Formula in D8
=SUM(D)
Select B8 to D8 and drag the yellow Fill Handle to the right.
If you want the appearance of merged cells, you can delete the contents of B1 and D1, then show No Border to the left and right of C1
And so on for EFG etc.
The cells are still there (to avoid problems down the track.
Regards,
Ian.
Edited to rearrange paragraphs. Ian.

Is there any way to reset my ipod, delete all content manually w/o itunes?

My ipod is just jacked. I'm thinking that I'm going to have to send it off to be repaired. I would like to delete all my photos, music, etc before I send it off.. is there any way to modify your ipod without conecting to the pc? It will not connect to itunes and it is not recognised by any pc I try it on.
THX!!

This is from a previous post I did earlier. This also cleans the iPod out without wiping the firmware. Your iPod may not be toast after all.
I was having the same problem as a lot of you where iTunes did not recognize my iPod. Now it does. Here's what I did.
Disclaimer: I am no computer expert, just read ALOT of posts and figured my problem out.
First problem I was having was that my cpu wasn't seeing the iPod as a mass storage device or iPod, just "removable disc". This was due to having my usb printer on. It was hogging resources I guess.
Still didn't work in iTunes and locked it up. Reset using the iPod (whre the Apple logo comes up and have to select language initial screen)
My problem included the following:
When I looked at the "about" list on the iPod it said "Songs: 0, Capacity: 0, Format Unknown". Nothing there so the computer wouldn't read it I guess. When I right clicked in My computer/J:removable disk and got to the list with "properties" (took a while but it finally came up) it said the format was RAW, and there were 0 bytes on the iPod.
This is the fix. On the same menu(removable disk - right click) there is selection called "Format..". Hit that and it should bring up a window to format the drive. Make sure it's set on "default Setting - or something like that", FAT32 and that the "Quick Format" is unchecked. Hit format and wait for it to finish.
After I did this the computer shows the iPod and iTunes recognizes it and off I went on re-syncing all of the music in my playlist.
Oh, and it did NOT delete the firmware in case you were worried like I was about that.
Hope this helps!

I have 15,686 photos on iPhoto 11 and am now, when uploading latest photos, getting a message saying that my startup disk is full. Is there any way of increasing the capacity of the start up disk?

I have 15,686 photos on iPhoto 11. As I've been uploading the latest photos in the last two days I've been getting a message stating that my start-up disk is nearly full. I had no idea there was a limit. Is there any way of increasing its capacity? I have been shooting in Raw of late and I know it takes up a lot of space but I have heard of other people who have over 20,000 photos on their computers, so what is going on here??

Two possibiilities here:
1. Your start up disk is nearly full
Or
2. You have minor damage to the iPhoto Library and it's giving you a bogus message.
But here's the thing: A full start up disk is a very serious issue and needs to be dealt with fast.
So, how big is your Hard Disk? How much free space on it?
Regards
TD

Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

Is there any way to contact verizon with a detailed cell phone technical support question?

Is there any way to contact Verizon with a detailed cell phone technical support question? I prefer e-mail so as to provide details (like I am trying to provide here). I have tried in-store personnel (no help at all) and the web chat - they just want to see me more data instead of helping me with my basic problem!
I CAN NOT GET ANYONE FROM VERIZON TO GIVE ME ANY HELP NOR CAN I FIND A WAY TO FILE A COMPLAINT. AT THIS POINT I JUST WANT TO DROP MY VERIZON ACCOUNT BUT I'M SURE THAT IT WILL COST ME A SMALL FORTUNE TO GET OUT OF IT.
Here is my issue:
Chat transcript removed as required by the Verizon Wireless Terms of Service
BELOW IS A SCREEN COPY FROM REDDIT ABOUT SOMEONE WITH THE SAME PROBLEM WITH A VERIZON CELL PHONE
So last night my RAZR MAXX HD did something totally bewildering by spontaneously downloading 2.6 GB of data over the course of ~ 3 hours. Fortunately I was able to catch this problem before it ended up being really expensive, but I still exceeded my 2 GB data plan by 600MB.
The Culprits:
Reddit News Free: 160 MB foreground / 0.96 GB background
Android OS: 0 MB foreground / 1.18 GB background
Several unnamed applications: ~ 350 MB
Screenshots:
The massive data spike
Android OS data usage
Reddit News Free data usage
Weird unnamed processes
Detailed timeline:
5:12 PM: Incident begins according to VZW data usage website (2.60410 GB used). This is around the last time that I used my phone at the laundromat before getting dinner and watching Game of Thrones.
8:04 PM: 50% of data allowance used (txt msg)
8:31 PM: 75% of data allowance used (txt msg)
8:58 PM: 90% of data allowance used (txt msg)
9:13 PM: 100% of data allowance used (txt msg)
10:05 PM: Got the text messages and immediately put the phone into airplane mode
10:30 PM: Took screenshots
10:45 PM: Enabled wifi, installed Kaspersky premium. Scan returned no threats.
11:00 PM: Left phone in airplane mode, went to sleep.
The questions:
What was the root cause of this issue? Did Reddit News freak out as a result of an esoteric bug or was my phone hacked?
If this was a simple Reddit News bug, then why was the Android OS also trying to use such a massive amount of background data?
What the hell are these unnamed numeric applications? I've inspected my process history and this is the first time they have ever attempted to use data.
I'm pretty sure that I can explain this situation to Verizon and get out of having to pay additional data usage fees, but I would like to know more about the problem before I get in touch with them.
all 13 comments
best
[–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago*
All I can think is your phone may have background downloaded an OTA update, and you'd then be prompted with something like, "As update to your Android system has been downloaded, would you like to install it now?"
I do find it very odd that the update would be 2.6GB. As a rough base, the CyanogenMod 10.1 firmware for your device is well under 200MB, so unless Verizon has a ****-ton of bloatware in the update, or it had to attempt to download multiple times for some reason, it may be a stretch.
But doing a little homework, it looks like the Verizon Razr Maxx was updated to 4.1 in late March. Maybe they're still rolling it out in waves? Have you gotten the update yet?
Edit: Aaaand I just noticed you appear to be running an AOSP-based ROM, which totally rules out a carrier update being sent out.
Edit2: If you want to live dangerously, you could try running:
#kill -9 12289
That 12289 is the PID listed in your screenshot. But don't run that without fulling understanding the kill command.
The ps command could also be of use, but probably not.
permalink
[–]lechnito[S] 2 points 1 year ago
I can confirm that the phone is currently at 4.1.2 and that I wasn't prompted for an OTA update.The fact that both the Android OS and Reddit News processes were simultaneously using an extremely large amount of data is unlikely to be a coincidence...
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago
That is very curious that the spikes happened at the same time.I'm curious. It may have put at least some of that 2.6GB somewhere. You could use a data visualizer tool to see if you can find it, which may lead to more clues.
permalink
parent
[–]lechnito[S] 2 points 1 year ago
The largest directories are:
DCIM: Normal looking photos (90,825 KB)
Android: Primarily map cache data (64,846 KB)
If it was downloading content then it did not significantly save content to storage. It's not like I have anything particularly sensitive on the phone, but the idea that it was uploading a snapshot of my data definitely makes me uncomfortable.
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
Yup, Digital Camera IMages and videos.Somewhere in /sdcard/Android would be my guess as to where a mysterious file would be downloaded, but if it's only 64MB, and mostly map data, I'd safely rule it out.I'm sorry, but I'm stumped here.Edit: I should mention I don't think this is malware, because unless a malicious app gained superuser access, any data it used would show under it's own apk in the data usage list, not Android OS.
permalink
parent
[–]mistrbrownstone 0 points 1 year ago
DCIM: Normal looking photos (90,825 KB)
Was it trying to auto-upload pictures or video to G+?I ******* hate that.
permalink
parent
[–]lechnito[S] 1 point 1 year ago
Although I'm not really up to speed with the Android platform, I come from a UNIX background so I feel comfortable running commands. How do I pull up a bash terminal? Do I need to root the phone first?
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
There's a number of terminal emulators in the Play Store that work well. You don't need a rooted phone to get to the shell as your user, but any privileged command won't execute unless you can grant it permission from the Superuser app that is installed when you root the device. So you could probably do a ps -e, but not a kill -9.
permalink
parent
[–]lechnito[S] 1 point 1 year ago
Got it. I downloaded a terminal emulator but unfortunately those processes no longer exist.Does Android keep a generic log of system level events like /var/log/syslog?
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
I don't think so, and I know you'd need superuser permission to read most of the files in /var/log anyway. I'm not super familiar with how Android does its logging, but I do know that the two files of interest are the logcat and dmesg.
permalink
parent
[–]sh0nuff 1 point 1 year ago
Want to mention here that using your settings to set your data cap (set it on your billing day), then you won't go over again.Those text messages are really unhelpful, as they send out well after the data has been used. Chances are good you hit close to the 2GB mark before you received the bulk of the messages.
permalink
[–]kindofabuzz -4 points 1 year ago
Quit installing pirated apps.
permalink
[–]lechnito[S] 1 point 1 year ago
That's definitely not the case here; both my PC and and Android phone are free from pirated apps.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there any way to grade a raw sequence on a framebyframe basis?

Similar Messages

Maybe you are looking for