Is There any way to improve the performance on this code
Hi all can any one tell me how to improve the performance of this below code.
Actually i need to calculate opening balance of gl account so instead of using bseg am using bsis
So is there any way to improve this code performance.
Any help would be appreciated.
REPORT ZTEMP5 NO STANDARD PAGE HEADING LINE-SIZE 190.
data: begin of collect occurs 0,
MONAT TYPE MONAT,
HKONT TYPE HKONT,
BELNR TYPE BELNR_D,
BUDAT TYPE BUDAT,
WRBTR TYPE WRBTR,
SHKZG TYPE SHKZG,
SGTXT TYPE SGTXT,
AUFNR TYPE AUFNR_NEU,
TOT LIKE BSIS-WRBTR,
end of collect.
TYPES: BEGIN OF TY_BSIS,
MONAT TYPE MONAT,
HKONT TYPE HKONT,
BELNR TYPE BELNR_D,
BUDAT TYPE BUDAT,
WRBTR TYPE WRBTR,
SHKZG TYPE SHKZG,
SGTXT TYPE SGTXT,
AUFNR TYPE AUFNR_NEU,
END OF TY_BSIS.
DATA: IT_BSIS TYPE TABLE OF TY_BSIS,
WA_BSIS TYPE TY_BSIS.
DATA: TOT TYPE WRBTR,
SUMA TYPE WRBTR,
VALUE TYPE WRBTR,
VALUE1 TYPE WRBTR.
SELECTION-SCREEN: BEGIN OF BLOCK B1.
PARAMETERS: S_HKONT LIKE WA_BSIS-HKONT DEFAULT '0001460002' .
SELECT-OPTIONS: S_BUDAT FOR WA_BSIS-BUDAT,
S_AUFNR FOR WA_BSIS-AUFNR DEFAULT '200020',
S_BELNR FOR WA_BSIS-BELNR.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'S_HKONT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
SELECT MONAT
HKONT
BELNR
BUDAT
WRBTR
SHKZG
SGTXT
AUFNR
FROM BSIS
INTO TABLE IT_BSIS
WHERE HKONT EQ S_HKONT
AND BELNR IN S_BELNR
AND BUDAT IN S_BUDAT
AND AUFNR IN S_AUFNR.
* if sy-subrc <> 0.
* message 'No Data' type 'I'.
* endif.
SELECT SUM( WRBTR )
FROM BSIS
INTO COLLECT-TOT
WHERE HKONT EQ S_HKONT
AND BUDAT < S_BUDAT-LOW
AND AUFNR IN S_AUFNR.
END-OF-SELECTION.
CLEAR: S_BUDAT, S_AUFNR, S_BELNR, S_HKONT.
LOOP AT IT_BSIS INTO WA_BSIS.
IF wa_bsis-SHKZG = 'H'.
wa_bsis-WRBTR = 0 - wa_bsis-WRBTR.
ENDIF.
collect-MONAT = wa_bsis-monat.
collect-HKONT = wa_bsis-hkont.
collect-BELNR = wa_bsis-belnr.
collect-BUDAT = wa_bsis-budat.
collect-WRBTR = wa_bsis-wrbtr.
collect-SHKZG = wa_bsis-shkzg.
collect-SGTXT = wa_bsis-sgtxt.
collect-AUFNR = wa_bsis-aufnr.
collect collect into collect.
CLEAR: COLLECT, WA_BSIS.
ENDLOOP.
LOOP AT COLLECT.
AT end of HKONT.
WRITE:/65 'OpeningBalance',
85 collect-tot.
skip 1.
ENDAT.
WRITE:/06 COLLECT-BELNR,
22 COLLECT-BUDAT,
32 COLLECT-WRBTR,
54 COLLECT-SGTXT.
AT end of MONAT.
SUM.
WRITE:/ COLLECT-MONAT COLOR 1.
WRITE:32 COLLECT-WRBTR COLOR 1.
VALUE = COLLECT-WRBTR.
SKIP 1.
ENDAT.
VALUE1 = COLLECT-TOT + VALUE.
AT end of MONAT.
WRITE:85 VALUE1.
ENDAT.
endloop.
CLEAR: COLLECT, SUMA, VALUE, VALUE1.
TOP-OF-PAGE.
WRITE:/06 'Doc No',
22 'Post Date',
39 'Amount',
54 'Text'.
Moderator message : See the Sticky threads (related for performance tuning) in this forum. Thread locked.
Edited by: Vinod Kumar on Oct 13, 2011 11:12 AM
Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus
Similar Messages
-
Is there a way to improve the performance of a report group?
Hi gurus,
Is there a way to improve the performance of a report group?
Points will be given later....
Thanks!Hi there,
Thank you for your response. I thought there's no answer for this issue and planning to change it to ALV.
I looked at the codes and debugged it. After the select statement from ZZUWT table (customized), there's a loop that takes much time (10-12mins) for 1000 records. and several nested perform routines. It's a standard program so I'm hesitant to edit it.
I'll be checking on the primary keys. If it's ok, may I ask for your assistance in this part? Though I'm not that familiar and haven't tried creating a report painter before.
Thanks anyway...:D -
I have license for Adobe Design Std CS6 6.0 MLP .Is there any way to get the installer for this?
Download CS6 products
Mylenium -
Is there any way to improve the Brush tool of Flash to draw as natural as in Photoshop?
Hi,
it's really bothering me and many other traditional animators that Adobe still hasn't improved the brush tool of Flash for people that want to really draw something on it.
I really really wish to be able to draw on flash as natural and consistent as in photoshop, without those stupid automatic smoothing options or the random roughness of it.
Flash is a great too for traditional animators but the brush is terrible.
Either make Photoshop as good for animating traditional as Flash, or give flash a brush that is nice as standard Photoshop brush.
I just want a normal brush is smooth and natural, that's all. Why are vector tools so weak for drawing????
PLEASE ADOBE, DO SOMETHING!!!Hi Sunil,
Iam not sure of the settings but if u can change the code then u can change the file format passed to FM SO_DOCUMENT_SEND_API1 ,which sends email to the recipient u desire..
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = l_v_sender_address
SENDER_ADDRESS_TYPE = l_v_sender_address_type
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = sent_all
TABLES
packing_list = it_packing_list
CONTENTS_BIN = it_attachment
CONTENTS_TXT = it_message
receivers = it_receivers
it_packing_list hs the file format field..
For any clarification , please revert back..
regards,
Dinesh.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 4:08 PM -
How to improve the performance of this code
Hi gurus
code is given below with LDB
this code look big but most of lines are commented
plz help its urgent
thanks in advance
*& Report ZSALES_RECON
REPORT ZSALES_RECON.
TYPE-POOLS : SLIS.
nodes: bseg , bkpf.
data : begin of zbseg occurs 0,
kunnr like bseg-kunnr,
*lifnr like bseg-lifnr,
dmbtr like bseg-dmbtr,
*shkzg like bseg-shkzg,
*gsber like bseg-gsber,
bschl like bseg-bschl,
*sgtxt like bseg-sgtxt,
total like bseg-dmbtr,
hkont like bseg-hkont,
BUDAT LIKE Bkpf-BUDAT,
belnr LIKE BSEG-belnr,
cash like bseg-dmbtr,
credit like bseg-dmbtr,
abn_voucher like bseg-dmbtr,
barista_voucher like bseg-dmbtr,
accor like bseg-dmbtr,
sodexho like bseg-dmbtr,
gift like bseg-dmbtr,
corp like bseg-dmbtr,
card like bseg-dmbtr,
miscellaneous like bseg-dmbtr,
werks like bseg-werks,
gjahr like bseg-gjahr,
SR_NO TYPE I,
shkzg like bseg-shkzg,
end of zbseg,
TP_TBL_DATA like ZBSEG.
DATA : idx TYPE sy-tabix.
Report data to be shown.
data: it_data like ZBSEG.
Heading of the report.
data: t_heading type slis_t_listheader.
AT SELECTION-SCREEN.
get bkpf.
START-OF-SELECTION.
data : sum_mis like bseg-dmbtr,
sum_abn like bseg-dmbtr,
sum_cash like bseg-dmbtr,
sum_credit like bseg-dmbtr,
sum_card like bseg-dmbtr,
sum_barista_voucher like bseg-dmbtr,
sum_accor like bseg-dmbtr,
sum_sodexho like bseg-dmbtr,
sum_gift like bseg-dmbtr,
sum_corp like bseg-dmbtr.
data : wa1_total like bseg-dmbtr.
data : wa_belnr like bseg-belnr,
wa_kunnr like bseg-kunnr,
wa_werks like bseg-werks,
belnr1 like bseg-belnr,
wa_sr_no type i.
GET BSEG.
data : wa like line of zbseg.
data : count type i,
count1 type i.
move-corresponding bseg to zbseg.
*idx = sy-tabix.
on change of zbseg-belnr.
wa_kunnr = zbseg-kunnr.
wa_kunnr = wa_kunnr+6(4).
select single werks into wa_werks from bseg where belnr = zbseg-belnr
and kunnr = '' and gjahr = zbseg-gjahr.
if wa_kunnr = wa_werks.
if zbseg-bschl <> '01'.
clear: sum_mis,wa1_total,sum_abn,sum_cash,sum_credit,sum_card,
sum_barista_voucher,sum_accor,sum_sodexho,sum_gift,sum_corp.
wa-BUDAT = BKPF-BUDAT.
wa-bschl = zbseg-bschl.
wa-hkont = zbseg-hkont.
wa-belnr = zbseg-belnr.
wa_belnr = wa-belnr.
wa-shkzg = zbseg-shkzg.
wa-kunnr = zbseg-kunnr.
count = wa-sr_no.
*wa-sr_no = count + 1.
idx = idx + 1.
append wa to zbseg.
**count = wa-sr_no.
*wa-sr_no = wa-sr_no + 1.
clear wa-total.
endif.
endif.
endon.
*clear : wa1_total.
if wa_belnr = zbseg-belnr.
loop at zbseg into wa.
wa-total = wa1_total.
wa-bschl = zbseg-bschl.
wa-hkont = zbseg-hkont.
count = sy-tabix.
wa-sr_no = count.
count1 = count.
*wa_sr_no = count.
modify zbseg from wa transporting sr_no.
IF wa-bschl eq '40' and wa-hkont eq '0024013020'.
if sy-tabix = 1.
wa-cash = zbseg-dmbtr.
sum_cash = sum_cash + wa-cash.
wa-cash = sum_cash.
modify zbseg index idx from wa transporting cash.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060010'.
if sy-tabix = 1.
wa-credit = zbseg-dmbtr.
sum_credit = sum_credit + wa-credit.
wa-credit = sum_credit.
modify zbseg index idx from wa transporting credit.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060015'.
if sy-tabix = 1.
wa-abn_voucher = zbseg-dmbtr.
sum_abn = sum_abn + wa-abn_voucher.
wa-abn_voucher = sum_abn.
modify zbseg index idx from wa transporting abn_voucher.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060017'.
if sy-tabix = 1.
wa-barista_voucher = zbseg-dmbtr.
sum_barista_voucher = sum_barista_voucher + wa-barista_voucher.
wa-barista_voucher = sum_barista_voucher.
modify zbseg index idx from wa transporting barista_voucher.
endif.
endif.
IF wa-bschl eq '40' and wa-hkont eq '0026060020'.
if sy-tabix = 1.
wa-sodexho = zbseg-dmbtr.
sum_sodexho = sum_sodexho + wa-sodexho.
wa-sodexho = sum_sodexho.
modify zbseg index idx from wa transporting sodexho.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060030'.
if sy-tabix = 1.
wa-accor = zbseg-dmbtr.
sum_accor = sum_accor + wa-accor.
wa-accor = sum_accor.
modify zbseg index idx from wa transporting accor.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026070040'.
if sy-tabix = 1.
wa-gift = zbseg-dmbtr.
sum_gift = sum_gift + wa-gift.
wa-gift = sum_gift.
modify zbseg index idx from wa transporting gift.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060070'.
if sy-tabix = 1.
wa-card = zbseg-dmbtr.
sum_card = sum_card + wa-card.
wa-card = sum_card.
modify zbseg index idx from wa transporting card.
endif.
endif.
IF wa-bschl eq '40' AND wa-hkont eq '0026060018'.
if sy-tabix = 1.
wa-corp = zbseg-dmbtr.
sum_corp = sum_corp + wa-corp.
wa-corp = sum_corp.
modify zbseg index idx from wa transporting corp.
endif.
endif.
*IF wa-bschl eq '11' .
*wa-total = zbseg-dmbtr.
*modify zbseg index idx from wa transporting total.
*endif.
IF wa-bschl EQ '40' or wa-bschl = '01' .
if sy-tabix = 1.
wa-total = zbseg-dmbtr.
wa1_total = wa1_total + wa-total.
wa-total = wa1_total.
*if idx = 2.
*modify zbseg index 1 from wa transporting total.
*else.
modify zbseg index idx from wa transporting total.
*endif.
endif.
endif.
*IF zbseg-TOTAL NE zbseg-DMBTR.
IF wa-BSCHL NE '11' AND wa-BSCHL NE '40'. "AND wa-BSCHL NE '01'.
if sy-tabix = 1.
if wa-shkzg = 'S'.
wa-miscellaneous = - wa-miscellaneous.
endif.
wa-miscellaneous = ZBSEG-DMBTR.
sum_mis = sum_mis + wa-miscellaneous.
wa-miscellaneous = sum_mis.
modify zbseg index idx from wa transporting miscellaneous.
endif.
ENDIF.
*wa1-miscellaneous = wa-miscellaneous.
*modify zbseg index idx from wa.
*ENDIF.
*append wa to zbseg.
*clear:zbseg-dmbtr.
endloop.
endif.
*****endif.
*****endon.
*ENDFORM.
*append zbseg.
*endloop.
End-of-selection.
perform build_alv using zbseg t_heading.
*& Form build_alv
Builds and display the ALV Grid.
form build_alv using t_data
*tp_tbl_data
t_heading type slis_t_listheader.
ALV required data objects.
data: w_title type lvc_title,
w_repid type syrepid,
w_comm type slis_formname,
w_status type slis_formname,
x_layout type slis_layout_alv,
t_event type slis_t_event,
t_fieldcat type slis_t_fieldcat_alv,
t_sort type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
Field Catalog
perform set_fieldcat2 using:
1 'SR_NO' 'SR_NO' 'BKPF' '5' space space 'SR NO' space space space
space space space space space t_fieldcat ,
2 'BELNR' 'BELNR' 'BKPF' '10' space space 'Document No' space space
space space space space space space t_fieldcat ,
3 'BUDAT' 'BUDAT' 'BKPF' '10' space space 'Document Date' space
space space space space space space space t_fieldcat ,
4 'KUNNR' space space space space space 'Site' space space
space space space space space space t_fieldcat ,
5 'TOTAL' space 'BSEG' space space space 'Total' space space space
space space space space 'X' t_fieldcat ,
6 'CASH' 'CASH' 'BSEG' space space space 'Cash Sales'
space space space space space space space 'X' t_fieldcat ,
7 'CREDIT' 'CREDIT' 'BSEG' space space space 'Credit Card'
space space space space space space space 'X' t_fieldcat ,
8 'ABN_VOUCHER' space 'BSEG' space space space 'ABN Voucher' space
space
space space space space space 'X' t_fieldcat ,
9 'BARISTA_VOUCHER' space 'BSEG' '15' space space 'BARISTA Voucher'
space space
space space space space space 'X' t_fieldcat ,
10 'CORP' 'CORP' 'BSEG' space space space 'ABN Corp' space space
space space space space space 'X' t_fieldcat ,
11 'SODEXHO' 'SODEXHO' 'BSEG' space space space 'Sodexho' space
space space space space space space 'X' t_fieldcat ,
12 'ACCOR' 'ACCOR' 'BSEG' space space space 'Accor'
space space space space space space space 'X' t_fieldcat ,
13 'GIFT' 'GIFT' 'BSEG' space space space 'Gift Coupon'
space space space space space space space 'X' t_fieldcat ,
14 'CARD' 'CARD' 'BSEG' space space space 'Diners Card' space
space space space space space space 'X' t_fieldcat ,
15 'MISCELLANEOUS' space 'BKPF' '18' space space
'Miscellaneous Income' space space space space space space space 'X'
t_fieldcat .
*14 'KBETR' 'KBETR' 'KONP' '10' space space 'Tax %age' space space
*space space space space space space t_fieldcat ,
*15 'MWSKZ1' 'MWSKZ1' 'RBKP' space space space 'Tax Type' space
*space
space space space space space space t_fieldcat ,
*16 'AMT' 'AMT' 'RBKP' space space space 'Amount Payable' space
*space
space space space space space 'X' t_fieldcat ,
*17 'WERKS' 'SITE' 'RSEG' space space space 'State' space space
*space space space space space space t_fieldcat .
*18 'GSBER' 'GSBER' 'RBKP' space space space 'Business Area' space
*space space space space space space space t_fieldcat .
Layout
x_layout-zebra = 'X'.
Top of page heading
perform set_top_page_heading using t_heading t_event.
Events
perform set_events using t_event.
GUI Status
w_status = ''.
w_repid = sy-repid.
Title
w_title = <<If you want to set a title for
the ALV, please, uncomment and edit this line>>.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
tables
t_outtab = zbseg
t_data
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
form set_top_page_heading using t_heading type slis_t_listheader
t_events type slis_t_event.
data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'SALES RECONCILIATION REPORT'(001).
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
form set_events using t_events type slis_t_event.
data: x_event type line of slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
endform.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-up = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
p_colpos: Column position.
p_fieldname: Field of internal table which is being described by
* this record of the field catalog.
p_ref_fieldname: (Optional) Table field / data element which
* describes the properties of the field.
* If this field is not given, it is copied from
* the fieldname.
p_ref_tabname: (Optional) Table which holds the field referenced
* by <<p_ref_fieldname>>.
If this is not given, the parameter
<<p_ref_fieldname>> references a data element.
p_outputlen: (Optional) Column width.
p_noout: (Optional) If set to 'X', states that the field is not
* showed initially. If so, the field has to be
included in the report at runtime using the display
options.
p_seltext_m: (Optional) Medium label to be used as column header.
p_seltext_l: (Optional) Long label to be used as column header.
p_seltext_s: (Optional) Small label to be used as column header.
p_reptext_ddic: (Optional) Extra small (heading) label to be
* used as column header.
p_ddictxt: (Optional) Set to 'L', 'M', 'S' or 'R' to select
whether to use SELTEXT_L, SELTEXT_M, SELTEXT_S,
or REPTEXT_DDIC as text for column header.
p_hotspot: (Optional) If set to 'X', this field will be used
* as a hotspot area for cursor, alolowing the user
* to click on the field.
p_showasicon: (Optional) If set to 'X', this field will be shown
as an icon and the contents of the field will set
* which icon to show.
p_checkbox: (Optional) If set to 'X', this field will be shown
as a checkbox.
p_edit: (Optional) If set to 'X', this field will be editable.
p_dosum: (Optional) If set to 'X', this field will be summed
(aggregation function) according to the grouping set
by the order functions.
t_fieldcat: Table which contains the whole fieldcat.
FORM set_fieldcat2 USING
p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given
is a data element.
If p_ref_tabname is given, the ref_fieldname given is a
field of a table.
In case ref_fieldname is not given,
it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
======================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = <<If you want to set a logo, please,
uncomment and edit this line>>
it_list_commentary = t_heading.
endform. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
WHEN '&IC1'.
Set your "double click action" response here.
Example code: Create and display a status message.
DATA: w_msg TYPE string,
w_row(4) TYPE n.
w_row = rs_selfield-tabindex.
CONCATENATE 'You have clicked row' w_row
'field' rs_selfield-fieldname
'with value' rs_selfield-value
INTO w_msg SEPARATED BY space.
MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
endform. "user_command
*********************************ldb code start from here *************************************************************
DATABASE PROGRAM OF LOGICAL DATABASE ZBRM_3
top-include and nxxx-include are generated automatically
Do NOT change their names manually!!!
*include DBZBRM_3TOP . " header
*include DBZBRM_3NXXX . " all system routines
include DBZBRM_3F001 . " user defined include
PROGRAM SAPDBZBRM_3 DEFINING DATABASE ZBRM_3.
TABLES:
BKPF,
BSEG.
Hilfsfelder
DATA:
BR_SBUKRS LIKE BKPF-BUKRS,
BR_SBELNR LIKE BKPF-BELNR,
BR_SGJAHR LIKE BKPF-GJAHR,
BR_SBUDAT LIKE BKPF-BUDAT,
BR_SGSBER LIKE BSEG-GSBER.
BR_SBUZEI LIKE BSEG-BUZEI,
BR_SEBELN LIKE BSEG-EBELN,
BR_SEBELP LIKE BSEG-EBELP,
BR_SZEKKN LIKE BSEG-ZEKKN.
working areas for the authority check "n435991
for the company code "n435991
*TYPES : BEGIN OF STYPE_BUKRS, "n435991
BUKRS LIKE T001-BUKRS, "n435991
WAERS LIKE T001-WAERS, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_BUKRS. "n435991
"n435991
*DATA : G_S_BUKRS TYPE STYPE_BUKRS, "n435991
G_T_BUKRS TYPE STYPE_BUKRS OCCURS 0. "n435991
"n435991
for the document type "n435991
*TYPES : BEGIN OF STYPE_BLART, "n435991
BLART LIKE BKPF-BLART, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_BLART. "n435991
"n435991
*DATA : G_S_BLART TYPE STYPE_BLART, "n435991
G_T_BLART TYPE STYPE_BLART OCCURS 0. "n435991
"n435991
for the business area "n435991
*TYPES : BEGIN OF STYPE_GSBER, "n435991
GSBER LIKE BSEG-GSBER, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_GSBER. "n435991
"n435991
*DATA : G_S_GSBER TYPE STYPE_GSBER, "n435991
G_T_GSBER TYPE STYPE_GSBER OCCURS 0. "n435991
"n435991
for the purchasing organization "n435991
*TYPES : BEGIN OF STYPE_EKORG, "n435991
EKORG LIKE EKKO-EKORG, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_EKORG. "n435991
"n435991
*DATA : G_S_EKORG TYPE STYPE_EKORG, "n435991
G_T_EKORG TYPE STYPE_EKORG OCCURS 0. "n435991
"n435991
for the plant "n435991
*TYPES : BEGIN OF STYPE_WERKS, "n435991
WERKS LIKE EKPO-WERKS, "n435991
RETCODE TYPE N, "n435991
END OF STYPE_WERKS. "n435991
"n435991
*DATA : G_S_WERKS TYPE STYPE_WERKS, "n435991
G_T_WERKS TYPE STYPE_WERKS OCCURS 0. "n435991
"n435991
*DATA : G_F_TABIX LIKE SY-TABIX. "n435991
"n435991
working tables for array database access "n934526
*types : begin of stype_key, "n934526
bukrs type bkpf-bukrs, "n934526
belnr type bkpf-belnr, "n934526
gjahr type bkpf-gjahr, "n934526
end of stype_key, "n934526
"n934526
stab_key type standard table of "n934526
stype_key "n934526
with default key. "n934526
Initialwerte setzen
FORM INIT.
ENDFORM.
Selection Screen: Process before output
FORM PBO.
ENDFORM.
Selection Screen: Process after input
FORM PAI USING FNAME MARK.
CHECK MARK = SPACE.
ENDFORM.
Lesen BKPF und Uebergabe an den Selektionsreport
FORM PUT_BKPF.
define locla working areas "n934526
data : l_t_key type stab_key, "n934526
l_t_key_block type stab_key, "n934526
l_t_bkpf type standard table of bkpf. "n934526
"n934526
----------------------------------------------------------"n934526
"n934526
database seletion improved "n934526
at first read all FI doc keys into a lean table "n934526
data: wa like bkpf-belnr.
SELECT * FROM BKPF
where budat in br_budat
AND GJAHR EQ BR_GJAHR-LOW
AND BLART = 'RV'.
AND BLART IN BR_BLAR "n934526
"n934526
check sy-subrc is initial. "n934526
"n934526
then process the found FI doc keys in small blocks "n934526
do. "n934526
if l_t_key[] is initial. "n934526
exit. " no more keys -> leave this DO loop "n934526
endif. "n934526
"n934526
form small blocks with 100 FI docs each "n934526
refresh l_t_key_block. "n934526
append lines of l_t_key from 1 to 100 "n934526
to l_t_key_block. "n934526
delete l_t_key from 1 to 100. "n934526
"n934526
read the complete FI doc headers for the block "n934526
SELECT * FROM BKPF "n934526
into corresponding fields of table l_t_bkpf "n934526
for all entries in l_t_key_block "n934526
WHERE BUKRS = l_t_key_block-BUKRS "n934526
AND BELNR = l_t_key_block-BELNR "n934526
AND GJAHR = l_t_key_block-GJAHR. "n934526
"n934526
provide the complete structure for the PUT "n934526
loop at l_t_bkpf into bkpf. "n934526
process this company code : authority and read T001 "n934526
PERFORM F1000_COMPANY_CODE. "n934526
"n934526
go on if the first authority check was successful "n934526
CHECK : G_S_BUKRS-RETCODE IS INITIAL. "n934526
"n934526
set the currency key and save the keys "n934526
MOVE : G_S_BUKRS-WAERS TO T001-WAERS, "n934526
BKPF-BUKRS TO BR_SBUKRS, "n934526
MOVE BKPF-BELNR TO BR_SBELNR.
MOVE BKPF-GJAHR TO BR_SGJAHR . "n934526
BKPF-GJAHR TO BR_SGJAHR. "n934526
PUT BKPF. "n934526
endloop. "n934526
enddo. "n934526
ENDSELECT.
ENDFORM.
Lesen BSEG und Uebergabe an den Selektionsreport
FORM PUT_BSEG.
define local working areas "n934526
data : l_t_bseg type standard table of bseg. "n934526
"n934526
----------------------------------------------------------"n934526
BR_SGSBER = BR_GSBER-LOW.
"n934526
SELECT * FROM BSEG "n934526
WHERE BELNR EQ BR_SBELNR
AND GJAHR EQ BR_SGJAHR
AND GSBER EQ BR_SGSBER.
check sy-subrc is initial. "n934526
"n934526
loop at l_t_bseg into bseg. "n934526
MOVE BSEG-BUZEI TO BR_SBUZEI.
MOVE BSEG-EBELN TO BR_SEBELN.
MOVE BSEG-EBELP TO BR_SEBELP.
MOVE BSEG-ZEKKN TO BR_SZEKKN.
PUT BSEG.
endSELECT. "n934526
ENDFORM.
"n435991
FORM AUTHORITYCHECK_BKPF "n435991
"n435991
"n435991
*FORM AUTHORITYCHECK_BKPF. "n435991
"n435991
the authority-check for the company code was successful; "n435991
check authority for the document type here "n435991
"n435991
does the buffer contain this document type ? "n435991
READ TABLE G_T_BLART INTO G_S_BLART "n435991
WITH KEY BLART = BKPF-BLART BINARY SEARCH. "n435991
"n435991
CASE SY-SUBRC. "n435991
WHEN 0. "document type is known "n435991
"n435991
WHEN 4. "docment type is new --> insert "n435991
MOVE SY-TABIX TO G_F_TABIX. "n435991
PERFORM F1200_CREATE_BLART_ENTRY. "n435991
INSERT G_S_BLART INTO G_T_BLART "n435991
INDEX G_F_TABIX. "n435991
"n435991
WHEN 8. "document type is new --> append "n435991
PERFORM F1200_CREATE_BLART_ENTRY. "n435991
APPEND G_S_BLART TO G_T_BLART. "n435991
ENDCASE. "n435991
"n435991
set the return code "n435991
MOVE G_S_BLART-RETCODE TO SY-SUBRC. "n435991
"n435991
*ENDFORM. "authoritycheck_bkpf "n435991
"n435991
"n435991
FORM AUTHORITYCHECK_BSEG "n435991
"n435991
"n435991
*FORM AUTHORITYCHECK_BSEG. "n435991
"n435991
does the buffer contain this document type ? "n435991
READ TABLE G_T_GSBER INTO G_S_GSBER "n435991
WITH KEY GSBER = BSEG-GSBER BINARY SEARCH. "n435991
"n435991
CASE SY-SUBRC. "n435991
WHEN 0. "business area is known "n435991
"n435991
WHEN 4. "business area is new --> insert "n435991
MOVE SY-TABIX TO G_F_TABIX. "n435991
PERFORM F1300_CREATE_GSBER_ENTRY. "n435991
INSERT G_S_GSBER INTO G_T_GSBER "n435991
INDEX G_F_TABIX. "n435991
"n435991
WHEN 8. "business area is new --> append "n435991
PERFORM F1300_CREATE_GSBER_ENTRY. "n435991
APPEND G_S_GSBER TO G_T_GSBER. "n435991
ENDCASE. "n435991
"n435991
set the return code "n435991
MOVE G_S_GSBER-RETCODE TO SY-SUBRC. "n435991
"n435991
*ENDFORM. "authoritycheck_bseg "n435991
"n435991ABAP provides few tools to analyse the perfomance of the objects, which was developed by us.
Run time analysis transaction SE30
This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05
by using this tool we can analyse the perfomance issues related to DATABASE calls.
Perfomance Techniques for improve the perfomance of the object.
1) ABAP/4 programs can take a very long time to execute, and can make other processes have to wait before executing. Here are some tips to speed up your programs and reduce the load your programs put on the system:
2) Use the GET RUN TIME command to help evaluate performance. It's hard to know whether that optimization technique REALLY helps unless you test it out.
3) Using this tool can help you know what is effective, under what kinds of conditions. The GET RUN TIME has problems under multiple CPUs, so you should use it to test small pieces of your program, rather than the whole program.
4) Generally, try to reduce I/O first, then memory, then CPU activity. I/O operations that read/write to hard disk are always the most expensive operations. Memory, if not controlled, may have to be written to swap space on the hard disk, which therefore increases your I/O read/writes to disk. CPU activity can be reduced by careful program design, and by using commands such as SUM (SQL) and COLLECT (ABAP/4).
5) Avoid 'SELECT *', especially in tables that have a lot of fields. Use SELECT A B C INTO instead, so that fields are only read if they are used. This can make a very big difference.
6) Field-groups can be useful for multi-level sorting and displaying. However, they write their data to the system's paging space, rather than to memory (internal tables use memory). For this reason, field-groups are only appropriate for processing large lists (e.g. over 50,000 records). If you have large lists, you should work with the systems administrator to decide the maximum amount of RAM your program should use, and from that, calculate how much space your lists will use. Then you can decide whether to write the data to memory or swap space.
Use as many table keys as possible in the WHERE part of your select statements.
7)Whenever possible, design the program to access a relatively constant number of records (for instance, if you only access the transactions for one month, then there probably will be a reasonable range, like 1200-1800, for the number of transactions inputted within that month). Then use a SELECT A B C INTO TABLE ITAB statement.
8) Get a good idea of how many records you will be accessing. Log into your productive system, and use SE80 -> Dictionary Objects (press Edit), enter the table name you want to see, and press Display. Go To Utilities -> Table Contents to query the table contents and see the number of records. This is extremely useful in optimizing a program's memory allocation.
9) Try to make the user interface such that the program gradually unfolds more information to the user, rather than giving a huge list of information all at once to the user.
10) Declare your internal tables using OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to be accessing. If the number of records exceeds NUM_RECS, the data will be kept in swap space (not memory).
11) Use SELECT A B C INTO TABLE ITAB whenever possible. This will read all of the records into the itab in one operation, rather than repeated operations that result from a SELECT A B C INTO ITAB... ENDSELECT statement. Make sure that ITAB is declared with OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to access.
12) If the number of records you are reading is constantly growing, you may be able to break it into chunks of relatively constant size. For instance, if you have to read all records from 1991 to present, you can break it into quarters, and read all records one quarter at a time. This will reduce I/O operations. Test extensively with GET RUN TIME when using this method.
13) Know how to use the 'collect' command. It can be very efficient.
14) Use the SELECT SINGLE command whenever possible.
15) Many tables contain totals fields (such as monthly expense totals). Use these avoid wasting resources by calculating a total that has already been calculated and stored.
Some tips:
1) Use joins where possible as redundant data is not fetched.
2) Use select single where ever possible.
3) Calling methods of a global class is faster than calling function modules.
4) Use constants instead of literals
5) Use WHILE instead of a DO-EXIT-ENDDO.
6) Unnecessary MOVEs should be avoided by using the explicit work area operations
see the follwing links for a brief insifght into performance tuning,
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_Introduction.asp
1. Debuggerhttp://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
2. Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
3. SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
4. CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
5. Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
6. Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
7. Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
8. Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
9. ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm -
Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?
Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control. -
ver 3.6.11
1. The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/
2. See [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the homepage] -
When I updated my iPad to ios5, I lost all my calendar entries. Is ther any way to retrieve the information? This was before iCloud was up and running.
try and restore you ipad maybe that would work
-
Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?
Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus -
Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task? It seems that would be very useful, yet I can't find an easily available setting for it. I would prefer to
accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered. I thought setting "CopyPrimaryKeys"
to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table.
I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.IIRW there is FastLoadKeepIdentity specifies
whether to keep an identity in OLEDB destination
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Is there any way to get the canvases names on the form
i have a form in Orcle 6i
i want when the form load i get the names of the Canvases on the Form automatically
to change their visual attribute
is there any way to get the name of the canvases on the form automatically
Thanks in advanceThe amount of time to evaluate each item in a Form is a lot less than you think. You are dealing with milliseconds. Worse case scenario, you might add 1 second to your form load time.
I think Francois's suggestion is the best solution, but if this is still too much time, you might concider creating strategic When-New-Item-Instance triggers on an item in each of your canvases that would perform what you want to do.
This will most likely cause problems of its own, but it is an alternative.
Food to get the thought process flowing... :-)
Craig... -
Is there any way to restore the 'Open New Tab' option in the tab bar drop-down menu?
After years of using tabbed browsing in Firefox, I've long-since gotten used to right-clicking the tab bar, and selecting the top menu item 'Open New Tab'. So much so that it has become reflexive. Now with v4, when I perform the same action, it now just reloads the current page. Is there ANY way to restore the option to the pull-down menu? I don't wanna have to move my pointer all the way to the other side of the screen just to open a new tab... (T_T)
Hello, I suffered from a similar problem with the new search bar type. I've found that you can go into '''about:config''', then search for '''browser.search.showOneOffButtons''' boolean and toggle that. This should restore the old functionality. (You might need to restart your browser)
Note that, like always, edit your '''about:config''' at your own risk.
credit: [http://www.askvg.com/how-to-disable-new-one-click-search-bar-interface-in-mozilla-firefox/ askvg.com] -
Is there any way of improving compatibility between ipad 4 and windows xp p
is there any way of improving compatibility beween ipad and windows xp
Hi Smokey0422,
Although iTunes works with Windows XP, iCloud is not supported - so that does limit the functionality somewhat.
See the resources for your iPad at the following site:
http://www.apple.com/support/ipad/
See the setup instructions below:
http://www.apple.com/icloud/setup/pc.html
Cheers,
Judy -
Is there any way to identify the two classes are compiled by same vm
Is there any way to identify the two classes are compiled by same vm?
Thank's a lot.I think this is the better forum than java compiler. The answer to the question you asked is no.
But that question is not the best way to address your problem.
If this were me, I'd use a tool like ASM (http://asm.objectweb.org/) to read in that file, and replace the getToday() method, with one like this
long getToday() {
return 20080101;
}and replace the class file with this new one. (keep the old one, they might be using a class loader that verifies class signatures or something)
(They said the code you are looking at could have been changed by you - so take the hint and change it back).
If they've ripped you off, this will restore justice much more cheaply and effectively than involving the lawyers. If they then sue you for breaching the license agreement, that would probably force them to disclose their underhand tactics.
OTOH, if you're lying to us about the purchase, and needing to pay for upgrades to fix the performance issue, and instead are trying to crack some trial software, then I hope they are using a custom class loader that checks the integrity of the classes.
If you are being ripped off, why are you not telling us the name of the company? I am not sure who is being ripped off here.
Bruce -
Is there any way to use the bundled PHP compiler without web sharing on?
Is there any way to use the bundled PHP compiler without Web Sharing on? Is there a way to make sure Web Sharing only allows local access so others on the network cannot access it? Any other easy way to get a PHP compiler on a Mac? I currently run Mac OS X 10.7.4. Any other security issues that might pop up from leaving Web Sharing on? Basically I just want a local PHP compiler so I can do some coding.
You can use another router as an 'extender' (I know that this will work seemlessly with AirPort Extemes and AirPort Express's - you'll have to check with your router manufacturer to determine what they recommend for range extenders).
You may also want to take a look at this link - http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html - it may offer some tips.
Clinton
Maybe you are looking for
-
Cluster Installation Error while running root.sh
Hi all, Please help I tried to install clusterware but when i run root.sh on first node it shows as below [root@rac11g1 etc]# /u01/app/oraInventory/orainstRoot.sh Changing permissions of /u01/app/oraInventory to 770. Changing groupname of /u01/app/or
-
Mac book pro latch (button problem)
I had have had my laptop for a long time now but the latch has apeared to stop working. I had a look through the discusions and most people said they had problems with their NON-MAGNETIC latches. However the problem on mine is that the left side of t
-
Why Am I Having to Make Way Too Many Hard Restarts?
Over the past couple of weeks, my wife and I have managed to lock up one or more programs to the point that it is necessary to shut down the computer using the power switch. The latest examples involve editing existing MS Word 2008 files in compatibi
-
Not enough memory to initialize the system??
Hi, I am trying to write a little MIDlet but have experienced some trouble with starting the MIDlet. I use the phone S55 and the MIDlet has about 12KB. There are about 9 displayables all extending List but one, which is just a string item. All runs f
-
Hi, I'm using iPhoto '11 to manage my pictures and I like a lot the "Faces" tool to tag people and find all the photos related to them in one click. I've shared several albums to Facebook hoping that the tagging was maintained and consistent. Unfotun