Is there any way to know that SOAP Client has closed and broken connection

Hi,
I am exposing a stateless session EJB using Oracle SOAP Webservices...and it is working smoothly.
But when the SOAP client crashes or is closed, is
there anyway that can know this happened on the server side i.e., the SOAP connection is lost.
Thanks,
Prashant

Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
      printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray

Similar Messages

Is there any way to know that the UI has been updated due to a bind change?

Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
printNodeAsImage(filename) //to a file
}

Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
      printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray

Is there any way to know data is read from tape and written to disk

is there any way to know data is read from tape and written to disk

784786 wrote:
Just asked because I am doing restoration, I see files read from tape and then restored, but can't find them physically there.
Is there any way I can find it.What kind of restoration? What kind of files?
The usual "no information" question is of the form "My car won't start. Tell me how to fix it"
Yours is a bit different - "I tried to fix my car. Tell me how to know it's fixed".

Is there any way to know that status of DEFINE variable?

Hi,
I have a list of scripts that is executed to create my baseline database. At the beginning of the script execution, we have a SET DEFINE OFF and at the end we put SET DEFINE ON. During one of the scripts, we deliberately SET DEFINE ON and we forgot to SET DEFINE OFF at the end of the script. Consequently, the following scripts started failing without error notification because they contained '&' in the INSERT query. I have the following queries:
1. Is there any way to know the status of the DEFINE variable at the beginning of the script?
2. Since the oracle gives a user interrupted error, the script execution process does not terminate with error. Instead, it continues executing the next scripts. Is there a general way to capture such errors and terminate the script execution. We already have WHENEVER SQLERROR and WHENEVER OSERROR in our script execution process.
Regards
Kunal

Hi, Kunai,
Welcome to the forum!
953495 wrote:
Hi,
I have a list of scripts that is executed to create my baseline database. At the beginning of the script execution, we have a SET DEFINE OFF and at the end we put SET DEFINE ON. During one of the scripts, we deliberately SET DEFINE ON and we forgot to SET DEFINE OFF at the end of the script. Consequently, the following scripts started failing without error notification because they contained '&' in the INSERT query. I have the following queries:
1. Is there any way to know the status of the DEFINE variable at the beginning of the script?Whether it's at the beginning of a script, later in the script, or not in a script at all, the SQL*Plus command
SHOW DEFINEtells you if DEFINE is ON or OFF.
If DEFINE is ON, it will produce something like:
define "&" (hex 26)If DEFINE is OFF, it will produce
define OFF
2. Since the oracle gives a user interrupted error, the script execution process does not terminate with error. Instead, it continues executing the next scripts. Is there a general way to capture such errors and terminate the script execution. We already have WHENEVER SQLERROR and WHENEVER OSERROR in our script execution process.Do you really need to capture those errors? Why not just prevent them? It sounds like you want to make sure DEFINE is OFF at a certain point. To do that, just say
SET DEFINE OFFRegardless of whether DEFINE was ON or OFF before you issue that command, you can be sure it will be OFF after that.
I hope this answers your question.
If not, post a complete test script (or set of scripts) that people can run to re-create the problem and test their ideas.
Point out where the scripts you post are not doing what you want, and describe, with specific examples, what you want it to do in those places.

Is there any way to know Em Space, En Space before and after Inline Graphic !!

Given I have the itemRef for the Inline Item. Is there any way to know Space before and after !! Like En Space, Em Space etc ?
Thanks
Shwetag

Hi,
with WinClone being discontinued (although still findable at MacUpdate for example) your only choices would be the commercial iPartition or Drive Genius or CampTune.
All three claim to be able to resize partitions.
Regards
Stefan

I buy a iphone 4s vodafone locked secondhand i wand to unlock but i dont know that is it is insurance clamed phone or not is there any way to know that

hai

ONLY the carrier to which it is locked can unlock it.
Contact that carrier and ask if they offer this service and if you qualify.
No idea what your "insurance clamed" comments are about.

I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person?

I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person? Obviously I want the gift to be a surprise (for my best friend specifically) so asking them if they received it would ruin that.

Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

ICloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?

iCloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?

iCloud said that my stolen iphone will be wiped when the iphone connects to the internet. Then I received an email saying remote wipe has started. Is there any way to know if remote wipe was completed?

Is there any way to know when an app is going to be discontinued?

I purchased an app around eight months ago for $13. I forgot about it until I was reloading apps onto my new IPad. When I went to find it, it was no longer in the app store at all. I contacted the support people who told me that since it was "so long ago" there was no recourse. So does that mean that any time you purchase an app it could disappear at any moment? Is there any way to know in advance that this will happen? Never mind that it stinks to spend that amount of money and then have nothing to look back at.
Additionally, I have had trouble reloading apps that I have paid for as an "in app purchase". What is the deal with that? Is that information not stored like buying an app outright?
Thanks
DTC

Apple constantly reminds folks to backup their content. Apple warns folks all of the times that content may not always be available in the iTunes or Mac App Stores and most folks ignore the warnings or cannot be bothered to read them. No, unless the developer warns you that they are with drawing an app from one of the stores, there is no way to know in advance that an app may no longer be available.
http://support.apple.com/kb/ht4009

I have an ipod touch 3rd generation 8 gb, is there any way besides jailbreaking that i can get ios 4.3.?

I have an IPod Touch 3rd generation 8 gb, is there any way besides jailbreaking that I can get IOS 4.3.?

You do not have a 3rd gen 8Gb iPod Touch. There is no such thing - really, truely, double true, extra double protected true. {lllaass, back me up here}
Jailbreaking cannot be discussed on Apple forums., except to point you to the following article: http://support.apple.com/kb/HT3743 which will let you know why Apple strongly cautions against "jailbreaking".
You could sell your current iPod and buy a new one, which will be able to use iOS 5.
GM: gross mismanagement
I suppoose jailbreaking would be a GM!

Is there any way to know the T-code from the screen?

Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit.

Is there any way to know/capture my_work_station_PC_name from SAP/SE38?

Hi Experts,
Is there any way to know/capture my_work_station_PC_name from SAP/SE38?
If so, pls. let me know it.
thanq

thanq
I got the Computer name by using the FM POC_GET_COMPUTER_NAME.
But, I did not get it by using ur suggested Method.
But, I got the IP address, by using u suggested METHOD(but, am not llooking for it)
So, pls. just curious that, if ur time permits, pls. let me know that, How to code/use the suggested METHOD of COMPUTER NAME in my SE38 z_prog. I mean, sample code, roghly.
thanq

Hi is there any way of knowing what location my find my phone was turned off or last known location thnks

hi is there any way of knowing where my find my phone was turned off or its last location thnks

No. Apple can do nothing. For the future there are apps that will periodically email you the device's location (if connected to internet)

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record?

I have huge lag with Safari's Reading List using a rMBP. I have probably 80 articles saved, which is likely the cause of the lag. Is there any way to export that list of articles so as to be able to delete them from Reading List but still have a record of the articles I intend to read?

I'm currently dealing with this issue myself, except that my rMBP has NO articles in the reading list. It's a brand new rMBP too, purchased just this week, with the 2.6 Ghz Processor & 16GB of RAM.
Let's see what we can find. I may just take it back to the Apple Store.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Is there any way to know that SOAP Client has closed and broken connection

Similar Messages

Maybe you are looking for