Is there any way to log errors (dropped frames, specifically) to a file?

I'm a brand new user of FCP and Apple. I'm performing some testing and I don't see a way to log errors to a file. Any suggestions?

If you're experiencing dropped frames, dollars to doughnuts it's not an error in FCP but rather the fact that your scratch disk (the drive you're capturing to) isn't fast enough for the format you're capturing. It shouldn't be your startup disk in any event... FW drives are not fast enough for some formats, and internal SATA's aren't fast enough (at least just one of them) for uncompressed 10 bit or HD files... What are you capturing to, and which format are you capturing, DV?
Jerry

Similar Messages

Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?

Hi, Im not a frequent forum poster, as most of my questions can be found already answered on them!
This is a question Ive had for a long time and it amazes me that no-one else seems to ask it. I check at each OS upgrade but its never there...
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
I was able to do this years ago in MS Outlook, and utilized it all the time when I needed to push things back, now I have to open the event and select an new date in the drop-down calendar for each & every event I want to move to a new month at the end of the month.
If its definitely not possible, how to you ask apple to consider including it - it doesnt seem like a particularly difficult task.
Thankyou
Andrew.

Andrew,
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

Is there any way to log alarms to a SQL database?

Using Lookout 5.1, I have an application where it would be useful for Historical purposes to log alarm messages (generation, acknowledgement, completion) to an SQL database. It is desired to run a 3rd party application in order to compute response times, and determine historical trends that might be discernable from the frequency of particular alarms (equpment out of calibration, equipment needing replacement, etc...).
Is there any way to acquire information on alarms, their generation and completion?
David Dudley

After all the reliability and integration headaches we've had with Lookout 5.0, it was an uphill battle just to get those above me to upgrade to 5.1. I'm not about to start that mess again, in order to upgrade to 6.0, and in addition, if I went to them and said "It'd be nice to do .... to Lookout, and it will only cost us $$$ in order to do ....", I think I'd be kicked out of their office before I finished the sentence.
We've finally got Lookout 5.1 into a condition where it works reliably *most* of the time. I'm not about to start another upgrade path, unless it were to something else. Lookout seems fine for "small" systems, which are worked on by a single user, but in this case, we've got over 5000 tags from some 60 PLC's we're handling, with around 2000 or so discrete alarms. The system is maintained by me, and I do *some* development on it, but we also have 3 or 4 other people who also work on the *same* system, which in the current design, with a single lookout file, and no discrete process database system, makes it extremely difficult, since only one of the users can be working on the system at a time*, and they MUST do it on the production system, as you can't merge pieces from different developers into the single operating system.
Can Citadel 5 be added or merged into Lookout 5.1?
David

Is there any way to log web traffic information of the users with RV082 router ?

Dear all,
I just bought a RV082 router. I can't find any way for logging the web traffic of the users.
Can it be done with the router ?
Thanks
Fabio

Hello,
If I am not mistaking the best you can do is to send syslog traffic to a server or locally (to a server being preferred) .
But you are going to see stuff like this:
30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2101->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2102->81.0.235.240:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2103->81.0.235.251:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2104->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2105->81.0.235.250:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2106->212.5.219.46:80 on ppp0) [0,0]
You will need an external device to make this happen, Having a proxy server such as Squid would do it for you and not just that but will optimize the newtork :)
Regards,
Jcarvaja
CCIE 42930

Is there any way to log in using a skype account, not a Microsoft one?

I can only log into the app using the Microsoft account, however I have most of my skype contacts in my old skype account, is there a way to log in to the app using the skype account instead?

Hi and welcome to the Skype Community,
I'm afraid you can only sign in to Skype Translator using a Microsoft account. You can - however - link your Microsoft account to your "old" Skype account and then juse Skype Translator that way. Keep in mind though that you will lose the contact list of your Microsoft account based Skype account that way. More info on account linking: https://support.skype.com/en/faq/FA12060/how-do-i-link-my-skype-and-microsoft-accounts

Lost my music, is there any way to get it back through "previous itunes library" file?

About a 2 months ago I had to update my iTunes library, leading to this mess. The update told me that it didn't finish and that there was an error, so I had to reinstall all of my itunes. This led to all my songs having an exclamation point next to them. I didn't know how to get the music to each file so I got frustrated and deleted them. Then I found all of my songs and dragged them into itunes. Now, all my play counts, date of purchases, playlists, ratings, etc. are gone!! I noticed that there are "previous itunes libraries", one of which is from a couple days before all this happened. Is there ANY way at all that I can revert back to that file and it will have my playlists, play counts, etc.? ANY help will be greatly appreciated!!!

It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup copy (not good), then you can transfer from an ipod: File>Transfer Purcahses
You buy one and only one download. it is your responsibility to move copy/backup your purchases.

I deleted contents from pages school report by accident. is there any way to get it back. I reopened the file and it is blank, I deleted the contents from a school report by accident. is there any way to get it back. I reopened the file and it is blank

I opened a file to print and by accident highlighted and deleted the content. Then in a panic I closed the file and now when I open it is blank. Is there any way to get it back. I have looked and can not see anyway. I dont have anything in my backup?

I'm not sure about older versions, but in Pages 3.x (OS X 10.9.x) select File > Revert To > Browse All Versions. Hopefully there will be an earlier version that you can "revert to".

Is there any way to find out what a specific line of data usage was for?

There is a line on my bill for 97 MB of usage while I was bowling? I was not using my phone. How can I find out what it was doing for that specific charge?

Just like you said earlier
3. Re: Is there any way to find out what brush is applied to a path?
imagecollection Apr 7, 2015 6:01 PM (in response to Silly-V)
The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
so to retort I say this;
“I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
― Abraham Maslow, Toward a Psychology of Being

Is there any way to avoid duplicate copies of .docx and .pages files?

I frequently download .docx files (and .pptx/.xlsx, but let's just stick with .docx for now). I'm getting used to the pages format, except every time I try to modify a .docx file, I can't save it again without creating a new file. Ultimately I'll end up with a .docx version and a .pages version of the same file. Is there any way to edit and save just the .docx version? Or maybe even have the original .docx version replaced by a .pages version?

When you open a Word document with Pages you get a translated-to-Pages file & the original Word document is unchanged. There are programs that will save over the original file such as LibreOffice. Pages will not.

Is there any way to bind CoreMidi to a specific network device?

Currently, I have my iMac connected via ethernet to a wireless bridge (to get to the rest of the LAN).
I want to use some iPad/iPhone apps which use networked CoreMidi.
So, I enable AirPort, set up an ad hoc network on the Mac (via Create Network in the Airport menu). When I try to set up a networked MIDI controller, I can never connect. If I reboot without the ethernet cable connected, everything works fine.
I'd like to be able to run both at the same time, so is there any way to force CoreMidi to bind to the Airport rather than ethernet?

The songs from the Sony MP3 player need to be imported into your iTunes library first before they can be synced or added to your iPod Classic.
Regarding the songs that didn't import into iTunes, what format are they in and what seems to be different from them compared with the tracks that did import?
B-rock

Is there any way to log in to a windows domain from iPad?

My school has both a windows network and iPads. Until recently all worked fine except there has now been a county-wide internet policy change. To connect from the school network to the internet there is now a lightspeed gateway. Now this is fine on the windows PC as each child's log in credentials automatically pass to the lightspeed server to allow internet access.
On the iPads though the situation is almost bad enough to render them useless. To use any app that requires internet access you have to log in in either Safari or K9 browser (the education authority's prefered browser). The connection then drops out if the iPad goes into standby.
Is there any app that would allow the children to log on using their windows credentials when the iPad starts up and keeps them connected until they log out? This would make life so much easier - I managed to work out all the connection issues on my own but these children are under 8, expecting them to understand all this is unreasonable.

Oh Lightspeed.
And no there isn't for what you asked - through AD, have you looked at Mobile Manager in Lightspeed? I didn't want our school getting Lightspeed so I haven't used it - I don't know how much control and flexability it has.

Is there any way of logging into Cloud from Mac OS X 10.10?

I have a problem with Mac OS X 10.10 and Cloud. It does not log in and the Cloud window is empty. I know 10.10 is not "supported" still but is there a way to logon to Cloud at all. As I said the window is empty and spinning circle is doing it´s thing in the window.

1. Click here and buy the DVD; you may want to install more RAM in the computer.
2. There is no Boot Camp Assistant for 10.4.11, except for an long-expired beta.
(109961)

Is there any way to log in to active directory from a mac without joining the AD domain?

I am looking for a way to log in to active directory without having the Mac join the AD domain. Basically i have not been able to understand all the ramifications of joining the AD domain. From what I have read in various documentations on the apple site and some of the AD plug in sites, it seems that if the mac joins the domain, all kinds of group policies get 'transfered' to the mac experience. How exactly does that affect the privileges of the local mac user on their machine? do they need to change their mac password? what happens to their existing home directories? what happens when they have their laptops at home?
TIA
Costas Manousakis

Costas Manousakis wrote:
The reason i am hesitant about binding the macs is that i'm not sure what are all the effects of that. will they have to change their mac passwords / usernames? more than likely the auto login will have to go. If there are multiple accounts on the mac (ex one admin account and other regular and admin accounts) how does binding affect them? how will it work when the mac is not in the office? if they have admin rights on the mac but not on the windows AD, how will that affect them? Do you know of a source i could go to to find answers for questions like these?
Unfortunately, the source for answers should be your IT department. I can tell you how my machine works. I have a personal machine with no restrictions and a work machine bound to an Active Directory domain. Even my work machine has few restrictions compared to normal. I have a privileged account I can use if necessary. Also, I'm pretty much a goody-two-shoes so I don't try to circumvent restrictions.
Basically, the Mac uses a system called Open Directory to manage user accounts. Every Mac comes with its own miniature Open Directory server. If you have a network with MacOS X Server, you can use the server's Open Directory. You can also use Microsoft's Active Directory to perform all the same tasks. The user's logins and passwords would be whatever is on Active Directory. They can change their password on the Mac and it will change the Active Directory password. Active Directory can enforce passwords expirations too.
I am not an Active Directory administrator, so I can't give you specifics. Pretty much everything you have mentioned can be controlled via Active Directory. That is what it is for. It does require active participation of your IT staff. If you don't have that, then I don't see it working out well. It sounds like a paradox. IT wants to control users, but doesn't want to deal with it. You can't have it both ways. Maybe let it be known among the Mac users that visiting those restricted sites could cause IT to get rid of Mac altogether. That does sound like a probable outcome.

Is there any way to display a pdf inside of a swf file?

Are there any software that will convert Word documents or pdf into swf files that ca be displayed inside of a Flash movie. Currently, I am using FlashPaper but the software is not supported anymore by Adobe. I am creating eLearning courses and having a pdf open inside of a course without opening multiple makes for a better learning experience. Any help will be greatly appreciated.

http://cookbooks.adobe.com/post_PDF_2_SWF_Conversion-4701.html

Is there any way to send output in BlueJ to a .txt file?

I want to send the output of my BlueJ program to a .txt file. Is there any command to do it? If yes, then please tell me the syntax of that command along with an example using it?

Again, you're just misunderstanding the tools you're using. Java should do that, not BlueJ. You have to research this from the perspective of writing Java code to do it. If you search how to make BlueJ do it, you won't find it because BlueJ has nothing to do with it.
So you know your basic requirements.
- you use System.out
- you want that to go to a file in stead of to the command prompt / BlueJ console
Do you know how to work with files yet? If not, that would be something you need to learn right now. And after that, try a Google for "java System.out file" and see what you get.

Is there any way to log errors (dropped frames, specifically) to a file?

Similar Messages

Maybe you are looking for