Is there any way to read to dynamic configuration using abap mappings?

Hi,
Is there any way to read dynamic configuration suppouse filename using abap mappings, I mean using abap code?
Appreciate for your response.
Regards,
Daniel.LA

Daniel,
Yes it's possible. Please refer Henrique Pinto's reply in this thread -Re: Abap mapping and variable substitution in File adapter
raj.

Similar Messages

Is there any way to read XML directly from a Web Page ??

i have a url, which on sending request, shows XML in browser.
Now i need to read this XML in browser and then manipulate it according to my need and display it on another page.
actually the process is. :
1) i have to first retrieve an xml from other site. (XML will only be shown in browser)
2.)then i have to read the Xml and show it in according to my requirements.
Is there any way to read XML directly from a Web Page ??
is their logic to accomplish this.
e.g in Servlet i can do somewhat like this :
String wholeXml=Somemethod(url);
Please Advice

the average Java XML parser will accept an InputStream, so just open an URLConnection to the webpage, get the inputstream from it and feed that inputstream to the XML parser. If the URL has valid XML data, it will get parsed without problems.

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
Xueyu

Sorry, no. The only way to restore this note is to restore from a backup that contains it.

Is there any way to turn off data and use only wi fi

is there any way to turn off data and use only wi fi, going to a foreign country and do not want to use data but wi fi will be available. I want to be sure to use only wi fi

Yes there is!
Simply go into Settings, General, Mobile Data, Turn this off and make sure Data Roaming is also switched off! You can have wifi on and this will no charge your account for the data you use via Wi-Fi!

Is there any way to access the App Store using OS10.4.11 on a Mac G4?

Hi All:
Is there any way to access the App Store using OS10.4.11 on a Mac G4 (dual 1.42 Ghz, FW800, MDD)?
Thanks,
Robert

No. None of the applications from it will work either.
(81546)

Is there any way to generate Gantt chart by using oracle 9iDS?

Is there any way to generate Gantt chart by using oracle 9i reports builder
Can you please send me the link or more information on oracle 9iDS.
Thanks

Hi,
Oracle9iDS itself doesn't support creating Gantt charts. The option oyu have is to use Oracle Graphics 6i, because there is no Graphics in 9i, and configure it to run with Oracle9i Forms. There exist a whitepaper at otn.oracle.com/products/forms that explains how to make Graphics 6i work with Forms 9i.
Frank

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails?

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails? Please help. Thanks!

That exclamation mark is displayed when iPhoto cannot link to the original file. First make sure you are running a "managed" library by checking iPhoto's Advanced preference pane to make sure the checkbox to copy files into the library during import is checked.
Click to view full size
If it is checked you can try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there any way to find out a Tcode used by user in a particular interval.

Hi
Is there any way to find out a Tcode used by user between 10/8/2009 to 31/8/2009, in production?
Satish.

Yes i have been trying SE16N only. But i am unable to pull data based on dates (Aug/8 to Aug 21)... its showing list of users who have accessed the tcodes directly for entire month....
Se16n ->Export mode->month->08/2009
---> Transacction profile -->Standard
I want to find out only users who have used a particular tcode during those dates.....in august..
Satish

HT4059 Is there any way to read ibooks in my itunes library from my PC?

I have an ipad2 but would also like to be able to read purchased books on my PC (XP). Itunes does display the books I've purchased but I haven't been able to figure out how to read them using the PC. Is there any way to do this or is this just a 'feature' that apple thinks will make me a 'fan'?
Thanks,
monty4135

Thanks roaminggnome... I was afraid of that. Sigh... The corporate understanding of what's 'proprietary' vs. what is flexible and useful amazes me. Especially when they express amazement and outrage over market loss when someone else comes along with a product which does this. That's usually when they go to congress for a 'law' to protect their corporate butts. Anyway, thanks for your help.
monty4135

Is there any way to read previous day's PSa request

Hi Friends,
I need to read previous day's PSA request data. Is there any way to do it?? Kindly suggest.
Thanks in advance,
Steve.

Hi Steve,
Yes you can view any past period data loaded to PSA. For this follow following steps:
1. Right click on the datasource
2. Select option "Manage"
3. This will give you the list of PSA requests loaded for that datasource
4. On the top of requests list you will find an option to provide a date for selection "Requests Newer Than"
5. Please enter the date starting from which you want to see the requests loaded in this selecion
6. In your case please enter yesterday's date.
Regards,
Geetanjali

Is there any way to read a ......... password on my iPad?

I just bought an iPad Air and my Ymail account keeps asking for my password, however I must have forgotten it , my iPad3 is still receiving mail from my Ymail account but I have agreed to sell it to a friend, to complicate matters my rescue email address held at Ymail is obsolete.
My question to the community is:
Is there any way to 'see' the password in settings on my iPad3, so that I can put it into my iPad Air?
TIA

Thanks for your replies guys, luckily I found the password on my Mac Book Air from which I set up the Ymail account originally and it was the same password that I had entered on the iPad Air but for some reason it didn't accept it, so I started second guessing myself! Happy ending

Is there any way to read to dynamic configuration using abap mappings?

Similar Messages

Maybe you are looking for